How to Place an Order
Store Pick Up
Request for Quotation/ International Sourcing
Order Status
Note: The product not include Raspberry Pi Pico.
Store Pickup Available!
Free Ship Over 5000 BDT
Quality Product
No Warranty
No Replacement
This Gravity Expansion Board, specifically designed for Raspberry Pi Pico, is compatible with a variety of Gravity sensors and modules. Featured By RoboticsBD.
With all pins led out, you can directly use it without soldering. Additionally, the board offers various communication ports including, 2 x I2C, 2 x UART, 2 x SPI, 3 x analog IOs and 13 x digital IOs as well as a 3.3~5.5V power connector and GDI port, which provides you with an easier way to prototype.
Product Images are shown for illustrative purposes only and may differ from the actual product.
Note: The product not include Raspberry Pi Pico.
| General Specification | |
| Pin header Gender | Female |
| Digital IO | 13: GP2, GP3, GP12-22 |
| Analog IO | 3: GP26-GP28 |
| UART | 2 |
| I2C | 2 |
| SPI | 2 |
| PH2.0 Power Connector | 3.3 V - 5.5 V |
| Display Screen Interface | GDI |
| Dimension | 73.00x63.00 mm/28.74x24.8 inch |
| Shipment Weight | 0.047 kg |
| Shipment Dimensions | 8 × 5 × 3 cm |
Please allow 5% measuring deviation due to manual measurement.
1 x Gravity: Expansion Board for Raspberry Pi Pico
The latest price of Gravity: Expansion Board for Raspberry Pi Pico in Bangladesh is BDT 840 You can buy the Gravity: Expansion Board for Raspberry Pi Pico at best price from our RoboticsBD or visit RoboticsBD Office.
|
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. |
|
Product Images are shown for illustrative purposes only and may differ from the actual product. |
Reference: RBD-0020
Model: SG90 Weight: 9 gm Operating voltage: 3.0V~ 7.2V Servo Plug: JR Stall torque @4.8V : 1.2kg-cm Stall torque @6.6V : 1.6kg-cm Note: Product images/ Components brand may vary from actual product as our stock rotates.
Reference: RBD-1599
Brand: Raspberry Pi Official
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Temperature sensor
Reference: RBD-1734
Center female pin header for direct attaching the Raspberry Pi Pico. Extra USB connector for external power supply. Immersion Gold Process Black Base Panel, White Pinout Labels, Golden Rounded Outline, Stunning Aesthetic *Please make sure there are no pin conflicts between the modules you want to use together before connecting. Raspberry Pi Pico and...
Reference: RBD-2012
Brand: Raspberry Pi Official
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
Reference: RBD-3609
Brand: Seeed Studio
The Seeed Studio XIAO ESP32-C6 is a thumb-sized, feature-rich microcontroller board built around Espressif’s powerful ESP32-C6 chip. Designed for next-generation IoT applications, it delivers robust multi-protocol wireless connectivity including Wi-Fi 6, Bluetooth 5 LE, Zigbee, and Thread—all within a compact 21 x 17.8mm form factor. With support for the...
Reference: RBD-2668
Brand: ST Microelectronics
A small module with 32-bit microcontroller equipped with ARM Cortex M4 core, 72 MHz, 64 kB Flash, 16 kB SRAM. Nucleo is compatible with mbed platform. The pinouts are compatible with Arduino Nano.
Reference: RBD-2670
Brand: ST Microelectronics
Nucleo allows you to implement projects based on a powerful microcontroller with a 32-bit ARM Cortex core. The modules are compatible with Arduino overlays. NUCLEO-G070RB has ARM Cortex M0+ 32-bit core, I2C, UART, SPI interfaces, 128 kB Flash memory, 36 kB SRAM. The board is equipped with connectors compatible with Arduino Uno V3 and Morpho ST. There are...
Reference: RBD-2652
Firstly, In terms of pins, the D1 Mini and NodeMCU V3 development boards are quite similar. They both break out all ESP8266 ESP-12E/F pins. The NodeMCU V3 board has additional 3V3 and GND pins. Hence, it is more suitable for various connections to devices with an additional button for the flash. A high-quality USB cable is essential for this board to...
Reference: RBD-1140
Open-source single-board computer. Android 4.4. Ubuntu. Debian. Raspbian Image. AllWinner H3 SoC. 512GB DDR3 SDRAM.
Reference: RBD-2373
Orange Pi Zero 2 with casing Versatile open-source maker artifact Can be used for various applications like game consoles, IoT devices, smart home projects, 3D printing, cash registers, and smart gateways
Reference: RBD-3236
Brand: DFRobot
DFRduino M0 is the first 32-bit Arduino compatible microcontroller based on ARM Cortex-M0 core that supports 5V logic.
Reference: RBD-2996
Powerful FPGA board with HDMI, RGB, and SPI screen interfaces for diverse projects. Ideal for FPGA beginners and enthusiasts to explore hardware design. Features 8640 LUT4s, 64M SDRAM, and various on-board peripherals for complex designs. Gowin IDE support simplifies FPGA design and configuration. Small form factor for easy integration into projects
Reference: RBD-1599
Brand: Raspberry Pi Official
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Temperature sensor
Reference: RBD-1968
Brand: DFRobot
STEM Education Micro:bit V2 Development boards
Reference: RBD-1527
Based on ATmega32 8 Bit microcontroller USB external programmer Included Datasheet, Manual, Software & Sample codes All Port pins pins available for peripheral interfacing
Reference: RBD-3495
The STM32F103C8T6 Development Board is an ideal learning and development platform for engineers, students, and hobbyists seeking to master ARM Cortex-M3 microcontrollers. Designed around the powerful STM32F103C8T6 chip, this board supports a wide range of peripheral interfaces and module experiments, making it a versatile core for embedded system projects.
Reference: RBD-1523
Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.
Reference: RBD-1531
Brand: ST Microelectronics
The commissioning kit is based on the board STM32f429zit6 (180 MHz, 2 MB of Flash memory, 256 KB RAM, Cortex-M4F ARM). On-Board is also 3-axis gyroscope, touchscreen LCD 2.4" QVGA TFT and programmer / debugger ST-LINK/V2-B.
Reference: RBD-1519
Brand: Raspberry Pi Official
Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz) LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0) Operating Power 5V@3A via USB Type-C port. Keyboard Layout: US Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p Built-in Raspberry Pi Official Keyboard
Reference: RBD-3124
The T-A7670E-R2 is a high-performance ESP32-based module designed for a wide range of IoT and embedded applications. This model offers robust connectivity options with integrated LTE and GSM support, making it suitable for various global regions. The module comes equipped with versatile features for seamless integration into advanced projects.
Reference: RBD-3071
Introducing a compatible Raspberry Pi Pico Clone, Made in China. Equipped with the authentic Raspberry Pi RP2040 microcontroller chip, this Pico offers comparable performance at a competitive price point. However, it's essential to note that while the microcontroller chip is genuine, the PCB itself is not manufactured by Raspberry Pi but rather in China....
Reference: RBD-2309
ESP8285 ESP-M2 Development Board with built-in 1MB FLASH memory Features the reliable ESP8266 processor with full WiFi functionality Pre-programmed with NodeMCU Lua firmware for quick project setup Compact, solder-friendly design with onboard PCB antenna Ideal for smart home automation, IoT projects, and sensor networks
Reference: RBD-1821
Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled Arduino-like hardware IO Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units Onboard USB to serial chip to easily program and upload codes from the Arduino IDE Easy to use breadboard friendly form...
Reference: RBD-3527
Brand: DFRobot
The UNIHIKER K10 AI coding board is designed for K12 STEM education and beginners, combining vision AI, voice control, and TinyML machine learning in one compact device. This AI learning coding board features a 2.8-inch color display, dual wireless connectivity (Wi-Fi/Bluetooth), and a comprehensive sensor suite including a 2MP camera, microphone,...
Reference: RBD-1807
Altera Cyclone IV FPGA EP4CE6E22C8N EP4CE6 Development Board
Reference: RBD-1412
Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH: QSPI flash 4MB / PSRAM 8MB SRAM:520 kB SRAM Button: Reset USB to TTL: CP2104 Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO On-board clock:40MHz crystal oscillator Working voltage:2.7V-3.6V Working current: About 70mANote : AM-036 printed on board...
Reference: RBD-3169
Brand: ST Microelectronics
The STM32F051 Discovery Development Kit is designed to provide an easy and efficient way to explore and develop projects with the STM32F051R8T6 microcontroller. Powered by the ARM Cortex-M0 core, this development board offers a rich feature set, including debugging capabilities, user-friendly interfaces, and onboard peripherals, making it ideal for both...
Reference: RBD-3310
LuckFox Pico Plus RV1103 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, With Ethernet Port
Reference: RBD-1593
১ টি রাস্পবেরি পাই 4 (Made in UK) RAM: 1GB, 2GB, 4GB, 8GB (পছন্দ করে নিতে পারবেন) একসাথে দুটি HDMI মনিটর লাগানো যায়। ১ টি Argon One V2 Case কেস। রাস্পবেরি পাই এর ইউএসবি -সি পাওয়ার এডাপটার সুইচ সহ। ট্রান্সসেন্ড অথবা স্যানডিস্ক ব্রান্ডের জেনুইন ১৬ জিবি অথবা ৩২ জিবি মেমরি কার্ড প্রি-ইনস্টলড অপারেটিং সিস্টেম সহ। বিল্ট ইন Wi-Fi & Bluetooth গিগাবিট...
Reference: RBD-0740
Brand: Raspberry Pi Official
Fully HAT compatible 40pin GPIO (Unpopulated) Stream and watch Hi-definition video output at 1080P 512MB RAM and Micro SD Slot for OS Tiny Current Draw ~ 140mA at 5V! Mini-HDMI for Video Micro-USB OTG Host for Data and Power Micro-CSI Camera Port On-Board Bluetooth and WiFi. RoboticsBD
Reference: RBD-2366
Wi-Fi + Bluetooth LE MCU Module with complete wireless functionality for versatile IoT applications. Pin headers for easy interfacing; ideal jumper wire connections. USB-to-UART bridge for power supply, programming, and communication with speeds up to 3 Mbps. Neural network acceleration and signal processing support for advanced workloads. RGB LED and...
Reference: RBD-1962
ESP32-S2-DevKitM-1 Equipped with ESP32-S2-MINI-1 module Easy interfacing Integrates ESP32-S2FH4 chip. PCB antenna 4 MB SPI flash. This is an authentic Espressif board.
Reference: RBD-2381
Brand: Hi-Link
Advanced AI Technology: Powered by the TX510 chip with AI computing power of 1.2T@8bit/9.6T@binary for high-speed recognition. 3D Face Recognition: Supports 3D living detection and resists photo, video, and mask-based attacks. Compact Design: Small-sized module with simple integration for various applications. Infrared Support: Equipped with infrared fill...
Reference: RBD-0349
Support for the Arduino IDE 1.0 + (OSX/Windows/Linux). Power via USB or External Source or 7-16 v to 5 v (automatic selection).RoboticsBD The Onboard, 150 ma 5 v Regulator. Built-in USB and serial were debugging). 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming...
Reference: RBD-1378
Brand new Material: PP Color: Blue Size: approx. 300*220mm
Reference: RBD-1776
Capacity (mAh): 1000mAh (approx.) Rechargeable Times: Up To 1000 Times Output Voltage: 3.7V High energy density High working voltage for single battery cells. Pollution-free Long cycle life 1 pcs 3.7V 18650 Rechargeable Battery
Reference: RBD-3239
This 63/37 Tin-Lead solder contains 63% Sn (Tin) / 37% Pb (Lead) 170° - 180°C melting range Premium Quality Soldering Wire/Lead Low Melting Point Weight: 50 gram with spool 0.8mm Mix: 63% Sn / 37% Pb Known as Lead or Solder Wire Melting Temperature 170°C Approx. (Tested by RoboticsBD LAB) We suggest this solder wire/lead paired with this solder to make...
Reference: RBD-0653
Can be manually broken for the length needed. Connector: Pin Header 2.54mm Pitch Connector type: Pin Strips Male Number of pins: 40 Right angled male berg strip. (L Shaped)
Reference: RBD-0345
802.11 b/g/n Standards Wi-Fi Direct (P2P), soft-AP 1MB Flash Memory Integrated low power 32-bit CPU could be used as an application processor A-MPDU & A-MSDU aggregation & 0.4ms guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3) RoboticsBD
Reference: RBD-0656
Single row. 2.54mm pitch. 1 x 40 pins. Through-hole mount.
Reference: RBD-2012
Brand: Raspberry Pi Official
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-2012
Brand: Raspberry Pi Official
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-2393
Brand: Raspberry Pi Official
Enhanced Connectivity: Wi-Fi via Infineon CYW43439 High Performance: RP2040 microcontroller with dual-core Arm Cortex M0+ processor Flexible Power Options: from ~1.8 to 5.5V, ideal for batteries or USB power. Rich Interfaces: Includes 26 GPIO pins, 2x SPI, 2x I2C, 2x UART, ADC, and PWM channels. Easy Programming: Drag-and-drop via USB or Serial Wire...
Reference: RBD-1153
135 quality jumper Color: red, orange, yellow, green, blue, purple, gray, brown, white. Box size: 165 × 55 × 10 (LxWxH) mm. 140 pcs of 22 AWG solid wires
Reference: RBD-3239
This 63/37 Tin-Lead solder contains 63% Sn (Tin) / 37% Pb (Lead) 170° - 180°C melting range Premium Quality Soldering Wire/Lead Low Melting Point Weight: 50 gram with spool 0.8mm Mix: 63% Sn / 37% Pb Known as Lead or Solder Wire Melting Temperature 170°C Approx. (Tested by RoboticsBD LAB) We suggest this solder wire/lead paired with this solder to make...
Reference: RBD-1734
Center female pin header for direct attaching the Raspberry Pi Pico. Extra USB connector for external power supply. Immersion Gold Process Black Base Panel, White Pinout Labels, Golden Rounded Outline, Stunning Aesthetic *Please make sure there are no pin conflicts between the modules you want to use together before connecting. Raspberry Pi Pico and...
Reference: RBD-1541
For beginners who are interested in Arduino A complete set of Arduino’s most common and useful electronic components Infrared sensor receiving module Laser sensor module Temperature and humidity sensor module Infrared sensor module 5v relay module Obstacle avoidance sensor module.
Reference: RBD-0280
Tie-points: 170 (10×17) Size: 48 x 35 x 10 mm(LxWxH). Use: experimental, testing, robot Matching jumper, diameter 0.8mm Phosphor bronze nickel plated spring clips Accepts a variety of wire sizes (29-20 the AWG) **1 pcs Random Color
Note: The product not include Raspberry Pi Pico.
