How to Place an Order
Store Pick Up
Request for Quotation/ International Sourcing
Order Status
To upgrade the programmer using STM32CubeProgrammer you need to enable the "Shared" options. This product is a clone and might not support STM32Cube.
Store Pickup Available!
Free Ship Over 5000 BDT
Quality Product
No Warranty
No Replacement
ST-Link V2 Programmer For STM8 and STM32 is fully consistent with the official version, support for automatic upgrades, support the full range STM32 SWD (only 4pins including SWCLK, SWDIO, and power) and a full range STM8 SWIM (only 4pins including SWIM, Reset and power) download and debug.
Use this device to send program code to the 32-bit STM32 ARM Cortex or 8-bit STM8 microcontrollers. The header for this ST-Link v2 programmer contains connections for 5V, 3.3V, SWCLK, SWDIO, SWIM, Reset (RST/NRST) and GND. The connector on the opposite side of this device is a USB connector and is intended to be plugged into the computer. Featured By RoboticsBD.
Product Images are shown for illustrative purposes only and may differ from the actual product.
To upgrade the programmer using STM32CubeProgrammer you need to enable the "Shared" options. 
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
| General Specification | |
| Programmer For | STM8 and STM32 |
| Length (mm) | 56 |
| Width (mm) | 20.5 |
| Height (mm) | 8.5 |
| Weight (gm) | 15 |
| Shipment Weight | 0.018 kg |
| Shipment Dimensions | 7 × 3 × 3 cm |
Please allow 5% measuring deviation due to manual measurement.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
1 x ST-Link V2 Programmer For STM8 and STM32.
1 x Connecting Wires.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
The latest price of ST-Link V2 Programmer For STM8 and STM32 Local Chip in Bangladesh is BDT 585 You can buy the ST-Link V2 Programmer For STM8 and STM32 Local Chip at best price from our RoboticsBD or visit RoboticsBD Office.
|
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. |
|
Product Images are shown for illustrative purposes only and may differ from the actual product. |
(11)
(2)
(0)
(0)
(0)
(2)
Reference: RBD-0350
100% Brand new and high quality STM32 Board Model: STM32F103C8T6. Core: ARM 32 Cortex-M3 CPU. Debug mode: SWD. 72MHz work frequency. 64K flash memory, 20K SRAM. RoboticsBD 2.0-3.6V power, I/O.
Reference: RBD-0576
Chipboard STM32F103C8T6 On board, SWIM interface and reset button Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V. Power light and the Demo indicator light Leads all the pins and has detailed label for the Pins. Support SWIM debug mode. RoboticsBD
Reference: RBD-1102
PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable! Interface definition directly marked on the shell, clear, convenient and practical! 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V Shell characters using laser engraving, never fade off! Permanent clarity! 500MA internal...
Reference: RBD-1133
Compatible with NUCLEO-F411RE, onboard Cortex-M4 microcontroller STM32F411RET6 Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion Supports mbed, build prototype quickly by mbed SDK and online tools...
Reference: RBD-1531
Brand: ST Microelectronics
The commissioning kit is based on the board STM32f429zit6 (180 MHz, 2 MB of Flash memory, 256 KB RAM, Cortex-M4F ARM). On-Board is also 3-axis gyroscope, touchscreen LCD 2.4" QVGA TFT and programmer / debugger ST-LINK/V2-B.
Reference: RBD-1808
Model: F407VE-512K STM32F407VET6 development board F407 microcontroller learning board STM32 system board
Reference: RBD-2413
Versatile Programming Tool: Designed for Arduino Pro Mini, Lilypad, and MultiWii flight control boards. Compact and User-Friendly: MINI USB connector with a compact 6-pin SMD header for easy connectivity. Voltage Configurability: Built-in jumper allows switching between 3.3V and 5V for power and IO levels. Auto-Reset Functionality: Simplifies firmware...
Reference: RBD-1212
Single crystal 12M Tablet 340 USB port to serial port communication. USB1.1/2.0 compliant solution. Built-in 128 byte TX/512 byte RX buffer. Supports auto-Handshake Protocol. Support Win95/98/98se/ME/2000/XP/win7 32bit 64bit/Vista/supports full speed USB data transfer protocol. Design of electromagnetic interference. Data Exchange application. CH340 USB...
Reference: RBD-2655
5V power supplied by a USB connector USB 2.0 full speed compatible interface USB standard A to mini B cable 1.65V to 5.5V application voltage supported on SWIM interface SWIM low speed and high-speed modes supported Made in China To upgrade the programmer using STM32CubeProgrammer you need to enable the "Shared" options. This product is a clone and might...
Reference: RBD-2195
Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
Reference: RBD-2714
The ST-LINK V2.1 emulator offers comprehensive support for all STM32 models, providing versatile functionality for development and debugging tasks. This product is a clone and might not support STM32Cube.
Reference: RBD-2463
The SOP8 test clip is made of high-quality plastic and copper metal, which is durable and can be reused.When using the SOP8 test clamp, do not force it down, open the clamp and clamp it in from the left and right sides of the chip.The same is true when disassembling, you can't pull it out directly, you must first separate the clip from left to right, and...
Reference: RBD-2160
Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
Reference: RBD-3004
Brand: ST Microelectronics
STLINK-V3SET is a modular standalone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board.
Reference: RBD-0234
Brand: SparkFun Electronics
Description: This is a 7" LVDS LCD Cape for the pcDuino V3 with a 1024x600 screen resolution and capacitive touch from LinkSprite. This massive screen is a great addition for the pcDuino V3 that compliments its extreme versatility as a mini PC development platform.
Reference: RBD-3356
This Industrial Grade USB to RS422 Converter is designed to provide seamless data transmission between USB and RS422 interfaces, making it a reliable and versatile solution for various industrial applications. Equipped with the CH340 chip, it ensures fast and stable communication with RS422-compatible devices. The internal components shown in the picture...
Reference: RBD-2746
QL-2006 programmer is the high-speed programmer designed specially for development and production programming of PIC single chip microcomputer (SCM) by QLS Electronic Technology Co., Ltd. The product is featured with small volume, low power consumption, high reliability as well as easy and convenient operation.QL-2006 is applicable for almost all...
Reference: RBD-2988
Brand: ST Microelectronics
The STLINK-V3MINIE is a stand-alone debugging and programming tiny probe for STM32 microcontrollers, portable and easy-to-use. Onboard JTAG/SWD interfaces for communicating with STM32 microcontroller, also provides a virtual COM port for the host PC to communicate with the target microcontroller through one UART.
Reference: RBD-3575
The AVR ISP 10 Pin to 6 Pin Adapter Board allows easy conversion from a standard 10-pin ISP header to a 6-pin header, making it ideal for programming a variety of Atmel AVR microcontroller-based development boards. Whether you're using a USBASP programmer or working with Arduino platforms like the UNO, Nano, or Pro Mini, this adapter ensures seamless and...
Reference: RBD-2425
Now you can connect your Arduino boards, ESP or any other development platform with the Type-C USB Cable. Through a USB-C to USB-A connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
Reference: RBD-1700
Brand: Waveshare
Mini ST-LINK/V2 Small single board Extreme low cost solution In-circuit debugger/programmer STM8 STM32.
Reference: RBD-2412
Compatible with ATMEL AVR Processors: Supports ATMega, Tiny, Classic, CAN, and PWM series chips. Bootloader Recovery: Easily restore Arduino bootloaders. In-Circuit Programming: USB ASP programmer designed for seamless ATMEL AVR microcontroller programming. Firmware-Only USB Driver: No additional USB controllers required. Compact and Reliable: Built with...
Reference: RBD-1761
USB Type: Type-A to Type-B Weight: 80 gm. Length: 1m / 3.2Feet Long cable for easy work Fully compatible with the PC. Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
Reference: RBD-3270
Compatible with ATMEL AVR Processors: Supports ATMega, Tiny, Classic, CAN, and PWM series chips. Bootloader Recovery: Easily restore Arduino bootloaders. In-Circuit Programming: USB ASP programmer designed for seamless ATMEL AVR microcontroller programming. Firmware-Only USB Driver: No additional USB controllers required. Compact and Reliable: Built with...
Reference: RBD-1830
FT245+CPLD High-Speed Program Altera USB Blaster Download Cable FPGA / CPLD Downloader
Reference: RBD-1104
Isp interface: 6 PIN Isp interface: 10 PIN Power supply options: USB power Power supply options: external power supply (remove jumper cap)
Reference: RBD-3271
Compatible with ATMEL AVR Processors: Supports ATMega, Tiny, Classic, CAN, and PWM series chips. Bootloader Recovery: Easily restore Arduino bootloaders. In-Circuit Programming: USB ASP programmer designed for seamless ATMEL AVR microcontroller programming. Firmware-Only USB Driver: No additional USB controllers required. Compact and Reliable: Built with...
Reference: RBD-3048
This Industrial Grade USB to RS485 Converter is designed to provide seamless data transmission between USB and RS485 interfaces, making it a reliable and versatile solution for various industrial applications. Equipped with the CH340 chip, it ensures fast and stable communication with RS485-compatible devices. The internal components shown in the picture...
Reference: RBD-2198
Model: CH341 Series Main Chip: CH341B Dimensions in mm (LxWxH): 85 x 28 x 12 Weight (gm): 20 8-bit parallel in EPP or MEM mode
Reference: RBD-3357
This Industrial Grade USB to RS485/RS232 Converter is designed to provide seamless data transmission between USB and RS485/RS232 interfaces, making it a reliable and versatile solution for various industrial applications. Equipped with the CH340 chip, it ensures fast and stable communication with RS485/RS232 compatible devices. The internal components...
Reference: RBD-3373
DTECH IOT6554 1m 1.8m 3m USB A to TTL 3.3V UART Serial Converter Cable 6P Header Support Multisystem
Reference: RBD-0412
Microchip's PICkit3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. The MPLAB PICkit3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price.
Reference: RBD-1103
Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data. Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII. FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc. Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc....
Reference: RBD-3210
The ST-LINK V2 Emulator and Programmer is a reliable and high-performance tool designed for debugging, programming, and downloading applications for STM32 and STM8 microcontrollers. Featuring an original imported STM32 chip, this tool ensures stable and fast programming speeds and supports a wide range of IDEs and development software, including CubeIDE...
Reference: RBD-2362
CH340G USB to TTL Converter, ideal for Arduino Nano, Raspberry Pi, and other microcontrollers. Dual voltage support: 3.3V and 5V power output for versatile applications. Seamless USB to Serial communication with built-in CH340G chip. Compatible with Windows, Mac, and Linux systems (32-bit and 64-bit). Equipped with TX/RX pins for direct microcontroller...
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: RBD-0369
Supports binding and multicasting for home automation Mesh-network topology 2.4 GHz for worldwide deployment Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board Firmware upgrades via UART, SPI or over the air TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC DATA RATE: 250kbps Max RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile...
Reference: RBD-2052
Size: 1.3 inch Resolution: 128 x 64 Controlling Chip: SSH1106 Driving Voltage: 3.3-5V Operating Temperature: -40~70 celsius Interface Type: IIC Light Color: White If you want to purchase Blue color 1.3 inch OLED display module click here
Reference: RBD-2508
The ENS160 is a digital multi-gas sensor specifically designed for indoor air quality testing that optimizes the detection of a wide variety of gases and volatile organic compounds (VOCS), including toluene, hydrogen, ethanol, N02 and ozone. The air quality sensor is used in home and building automation, consumer products, electrical and air purification
Reference: RBD-2125
Phototransistor output No contact surface sensing Miniature package
Reference: RBD-3063
Flex length: 5.6 cm. Total Length: 2.2″ (7 cm). Life Cycle : >1 million. Height : 0.43mm (0.017″), Resistance Variation: 7.4K Ohms ±30%. -8.4KOhm Power Rating: 0.5 Watts. This flex sensor is a clone china product. It has little resistance variations, which can be mapped using Arduino. Please review our observations before making your purchase.
Reference: RBD-3207
The Raspberry Pi Pico 2W is a powerful and versatile microcontroller board, built on the advanced RP2350 chip, designed for wireless applications. With dual-core processors (Arm Cortex-M33 or RISC-V Hazard3), enhanced wireless connectivity (Wi-Fi 802.11n and BLE), and improved memory, this board delivers exceptional performance for a wide range of...
Reference: RBD-0909
Low voltage display Large LCD display and low battery indication Vibration control and protection functions. RoboticsBD Diode and on-off measurement alarm (with buzzer) AC frequency response: 40 to 400 HzMight Include a Battery.
Reference: RBD-0350
100% Brand new and high quality STM32 Board Model: STM32F103C8T6. Core: ARM 32 Cortex-M3 CPU. Debug mode: SWD. 72MHz work frequency. 64K flash memory, 20K SRAM. RoboticsBD 2.0-3.6V power, I/O.
Reference: RBD-0667
Input Supply Voltage (VDC): 3.3 ~ 5. Supply Current (mA): measurement 0.3mA standby 60μA. Temperature measurement range: 0~50 degrees. Temperature measurement error: ±2 degrees. Humidity measurement range: 20%~95%RH. Humidity measurement error: ±5%RH. RoboticsBD
Reference: RBD-0022
This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit. There are only four pins that you need to worry about on the HC-SR04: VCC (Power),...
Reference: RBD-1349
For Standard LCD 16x2. Press here.For Standard LCD 16x2 with Male Header. Press hereFor Standard LCD 16x2 with Female Header. Press hereFor Standard LCD 16x2 with I2C adapter board soldered. Press here.For Standard LCD 16x2 with White Background. Press here.For Standard LCD 16x2 with Blue Background. Press here. Model: LCD1602 Interface: I2C Interface...
Reference: RBD-2450
Micro size servo is perfect for driving micro-robot drive wheels. Continuous rotation servos are like regular hobby RC servos but modified to offer speed control instead of position control. They're essentially compact, affordable motors with integrated motor drivers. Add a wheel, and you've got a simple drive system for your robot, controllable...
Reference: RBD-2917
100% Brand new and high quality STM32 Board Model: STM32F103C8T6. Core: ARM 32 Cortex-M3 CPU. Debug mode: SWD. 72MHz work frequency. 64K flash memory, 20K SRAM. RoboticsBD 2.0-3.6V power, I/O.
Reference: RBD-0687
Detection distance: 2 ~ 30cm Detection angle: 35 ° Comparator chip: LM393 3mm screw holes for easy mounting
Reference: RBD-0145
Dual output mode, analog output more accurate A fixed bolt hole for easy installation With power indicator (red) and digital switching output indicator (green) Having LM393 comparator chip, stable. Operating Voltage: 3.3V~5V
To upgrade the programmer using STM32CubeProgrammer you need to enable the "Shared" options. This product is a clone and might not support STM32Cube.
