Reference: RBD-1354
Jumper Wire Single 20cm
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0351
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
Reference: 0245
Choose your desire Resistor value from below:
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: 1353
Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0761
Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical
Reference: RBD-3099
The VL53L1X is an advanced Time-of-Flight (ToF) laser-ranging sensor, designed to expand the capabilities of the ST FlightSense™ product line. This miniature, high-performance sensor stands out as the fastest ToF sensor available, capable of accurate ranging up to 4 meters with a rapid ranging frequency of up to 50 Hz. Ideal for applications requiring...
Reference: RBD-1716
Working Voltage: 5.0V Maximum Working Current: 100mA Data Interface Level: L<0.8V, H>2.7V, maximum voltage level 3.3V Particle Measurement Range: 0.3 ~ 1.0μm; 1.0 ~ 2.5μm; 2.5 ~ 10μm Note: Please purchase this adapter board to use it with Arduino and Raspberry Pi.
Reference: RBD-2978
Flow Range:0.3 to 6L Input/Output Diameter: 6.5mm Minimum rated working voltage: DC 5~24V Max. working current: 15mA (DC 5V) Working voltage range: DC 5~24V Load capability: <= 10mA (DC 5V)
Reference: RBD-3100
The VL53L5CX is a cutting-edge time-of-flight (ToF) multi-area ranging sensor developed by STMicroelectronics. Leveraging the latest generation of direct ToF technology, it provides absolute range measurements up to 400 cm, regardless of target color or reflectance. The sensor's advanced capabilities make it the fastest multi-zone mini ToF sensor on the...
Reference: RBD-0311
Working Voltage: 5 to 18V DC (min tested working voltage 4.5V). RoboticsBD Max current draw: 15mA @ 5V. Working Flow Rate: 1 to 30 Liters/Minute. Maximum water pressure: 2.0 MPa. Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min). RoboticsBD
Reference: RBD-1719
Envitec Honeywell OOM202 Medical Ventilator Oxygen Sensor Made in GermanyManufacture Date: 2024 March
Reference: RBD-3406
The Intel RealSense Depth Camera D435 is a powerful, full-featured depth camera designed for fast-moving applications. Featuring a global shutter for high-speed image capture and wide field of view, the D435 is an ideal solution for robotics, AI, augmented reality, and automation projects. It is a stereo depth camera that delivers accurate and reliable...
Reference: RBD-1751
Detection Gas: H2, Alcohol, CO, VOC Detection Range: 10~500ppmH2 5~500ppm Alcohol 10~500ppm CO Air Quality Sensor Module
Reference: RBD-2979
Working voltage: DC1.8-7V(low consumption version),7-24V(regular version), 7-24V(PLC version) Rated voltage: 7 to 24 V Pulse output duty cycle: 50+-10% Insulation resistance: 100M Ohm and above Input/Output Diameter: 9.5mm
Reference: RBD-1934
Dual signal output (analog output and TTL level output) The TTL output effective signal is low. Analog output 0 ~ 5V voltage, the higher the concentration the higher the voltage. Good sensitivity to hydrogen sulfide, liquefied gas, natural gas, city gas, and smoke. with long service life and reliable stability fast response recovery characteristics
Reference: RBD-2980
Working voltage range: DC 5 – 18V. Load capacity: ≤ 10 mA (DC 5V). Working temperature: ≤ 80 ℃ Lightweight, small size, easy to install. Inlaid with stainless steel impeller shaft, durable wearable. The seal ring with the upper and lower force structure never leaks. Non-violent shock, and chemical erosion.
Reference: RBD-1966
Tuya Smart Wifi Wireless Natural Gas Leak Detector Gas Sensor Household Combustible LPG Gas Leak Alarm Detector With LCD Display
Reference: RBD-2981
Model: YF-S402C Specification: G3/8 Input/output size: 15mm Operating voltage 5 to 18 V Analog Sensor Accuracy Up to 5% Water Proof Sensor
Reference: RBD-2075
MQ-2 Smoke Gas Detector Sensor ME084 Module for Arduino Operating Voltage:+5V Preheat Duration:20 s
Reference: RBD-2982
Measures water flow from 10 to 200 liters per minute. Hall-effect sensor for accurate pulse signal output. Durable plastic body; waterproof, heat-resistant, and pressure-resistant. Suitable for industrial flow measurement applications. Easy installation and maintenance.
Reference: RBD-2325
Brand: DFRobot
Gravity Analog Dissolved Oxygen Sensor Kit for Arduino-compatible projects Measures dissolved oxygen in water to assess water quality in aquaculture, environmental monitoring, and natural science Galvanic probe design with no polarization time required and low maintenance costs Signal converter board with 3.3-5.5V compatibility for Arduino, ESP32,...
Reference: RBD-2983
Measures water flow from 1 to 120 liters per minute. Features a durable ABS and metal construction. Equipped with a hall-effect sensor for accurate pulse signal output. Suitable for use in water dispensers, coffee machines, and irrigation systems. Withstands water pressure up to 2.0 MPa.
Reference: RBD-2497
Compact size, measuring only 13*13*2.5mm Low power consumption High sensitivity and rapid response recovery Advanced MEMS technology Gas detected: CO Sensitivity: R0(in air) / Rs(in 150ppm CO) ≥ 3 Lifespan: ≥5 years (in air)
Reference: RBD-2508
The ENS160 is a digital multi-gas sensor specifically designed for indoor air quality testing that optimizes the detection of a wide variety of gases and volatile organic compounds (VOCS), including toluene, hydrogen, ethanol, N02 and ozone. The air quality sensor is used in home and building automation, consumer products, electrical and air purification
Reference: RBD-2987
Operating Voltage: 3.5-24VDC Operating Current: 15mA Insulation Resistance >100MOhm Nozzle Size: 1/8″