Reference: RBD-0023

HC-SR501 PIR Motion Sensor

112 reviews

Wide Working Voltage Range: DC 4.5V- 20V Current Drain: <60uA Detection Angle: <140° Detection Distance: 3 to 7m (can be adjusted) Blockade time: 2.5s (Default)  Work temperature: -20-+80°C

Reference: RBD-0291

Sound Sensor Module for Arduino

26 reviews

Main chip: LM393, Electret condenser microphone Working voltage: DC 3.3-5V Induction distance is 0.5M Signal output Indication Single channel signal output The output effective signal is low level.

Reference: RBD-0169

Flex Sensor 2.2" Original

9 reviews

Flex length: 5.6 cm. Total Length: 2.2″ (7 cm). Life Cycle : >1 million. Height : 0.43mm (0.017″), Resistance Variation: 30K-70K Ohms ±30%. Power Rating: 0.5 Watts.

Reference: RBD-0368

Force Sensitive Resistor 0.5"

2 reviews

Thickness: 0.4mm Trigger Force: 20g, triggered (default resistance<200kΩ)  Pressure Measuring Range: 20g~6kg Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz) Initial Resistance: >10MΩ Activation Time: <0.01S Operating Temperature: -40°C~+85°C  Lifespan: >1million times Hysteresis: +10%，(RF+ -RF-)/FR+，1000g...

Reference: RBD-0411

HB100 Microwave Sensor 10.525GHz Doppler Radar Motion Detector Arduino

2 reviews

Low current consumption (typical 30 mA) CW or pulse operation Flat profile Long detection range (20 m) Supply voltage: 4.75V to 5.25V X-Band Frequency: 10.525 GHz Minimum Power Output: 13 dBm EIRP. RoboticsBD

Reference: RBD-0690

ISD1820 Voice Recording Module With Mic and Loudspeaker

6 reviews

The main chip: ISD1820. Operating Voltage: DC 3V-5V. Loudspeaker: 8Ω, 0.5W. An easy to use 10 seconds of voice recording. High-quality, natural voice restored. Can be used as a propaganda module. With looping, jog playback, single-pass play function.

Reference: RBD-1753

INMP441 Omnidirectional Microphone Module

7 reviews

Digital I2S interface with high precision 24-bit dataHigh signal to noise ratio is 61 dBAHigh sensitivity – 26 dBFSStable frequency response from 60 Hz to 15 kHzLow power consumption: low current consumption 1.4 mAHigh PSR: -75 dBFS

Reference: RBD-1951

Anemometer/Wind Speed Measurement Sensor 0-5V

5 reviews

High hardness, Corrosion protection. Waterproofness and High precision. The mode of its output signal：0-5V(Voltage signal). supply voltage: DC 12-24V. Power consumption：Voltage MAX≤0.3W. Start wind speed：0.4-0.8m/s.

Reference: RBD-0417

Force Sensor Resistor Square 38.1mm

4 reviews

Easily customizable to a wide range of sizes Cost-effective Ultra-thin; 0.45 mm Robust; up to 10 million actuations Simple and easy to Integrate. RoboticsBD

Reference: RBD-0428

CJMCU APDS-9930 Proximity And Gesture Sensor

Operational Voltage: 3.3V. Ambient Light & RGB Color Sensing. Proximity Sensing. Gesture Detection. Operating Range: 4-8in (10-20cm). I2C Interface (I2C Address: 0x39). RoboticsBD

Reference: RBD-1022

High Sensitive Microphone Sound Sensor Detection Module

17 reviews

Main chip: LM393, Electret condenser microphone Working voltage: DC 3.3-5V Induction distance is 0.5M Signal output Indication Single channel signal output The output effective signal is low level.

Reference: RBD-1237

Brand: UNI-T

UNI-T Wind Speed Meter UT363BT

Ergonomic exterior, comfortable handling Millimeter accuracy  Large, multiple angle HD display Quick, auto calculation with real-time readout Multiple functions: measure wind speeds up to 30m/s, data storage, and more Auto power off after 3 minutes without operation  

Reference: RBD-0552

A6 Pro Serial GPRS GSM Module Core Development Board

7 reviews

Working frequency: quad-band network, 850 / 900 / 1800 / 1900MHz Working voltage: 4.8-9VDC(On-board voltage regulator circuit supply power for A6 module) Working Current: maximum of 2A. RoboticsBD

Reference: RBD-0572

VGA OV7670 CMOS Camera Module Lens CMOS 640X480 SCCB W/ I2C Interface Arduino

4 reviews

Operating Power: 60mW/15fpsVGAYUV. Sleeping Mode: <20 uA. Lens Size: 1/6″. Max. Frame Rate: 30fps VGA. Sensitivity: 1.3V / (Lux-sec). dynamic range: 52 dB. Electronic Exposure: 1 to 510 row.

Reference: RBD-1738

Active Speaker Buzzer Module for Arduino 5V

21 reviews

Operating Voltage : 1.5 ~ 15V DC Working Current: Less than 25mA Tone Generation Range : 1.5 ~ 2.5kHz Dimensions (LxWxH):  26 x 15 x 11 mm

Reference: RBD-3579

Wind Direction Sensor Replacement Part for WH Series Wireless Weather Stations

This Wind Direction Sensor is a high-quality replacement component specifically designed for WH series wireless weather stations, including the WH2081 model. Whether you're maintaining your existing weather monitoring setup or replacing a faulty part, this sensor ensures accurate and reliable wind direction readings for continued environmental tracking.

Reference: RBD-0664

ADXL345 Triple Axis Accelerometer Breakout

9 reviews

Supply Voltage: 3.3 V/ 5V. Interface Type: I²C, SPI. Sensing Range: ±2g, ±4g, ±8g, ±16g. Sensitivity X: 28.6 LSB/g. Sensitivity Y: 31.2 LSB/g. Sensitivity Z: 34.5 LSB/g. Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V. Free-Fall Detection. Tap/Double Tap Detection. RoboticsBD

Reference: RBD-0700

GY- BMI160 6DOF Gravity Accelerometer Sensor

2 reviews

Operating Voltage: 3.3V-5.5V Low Power Consumption High Accuracy Small Size

Reference: RBD-0982

Digital Barometric Pressure Sensor Module 0-40kPa

4 reviews

Model: HX710B Data Output Rate:10 SPS / 80SPS Max. Operating Current (mA):1.5 IC Package:16 Pin SOP

Reference: RBD-1172

Motion Sensor based LED Light Lamp Holder

5 reviews

Infrared Sensor Automatic Lighting Control Switch with lamp holder; convenient, safe & practical. Good solution for energy saving. You can conveniently let the light auto on/off. The switch can detect the human body's infrared, and use infrared to control the load. Easy to install. Strong anti-interference ability Suitable for corridor, toilet,...