Reference: RBD-0169

Flex Sensor 2.2" Original

9 reviews

Flex length: 5.6 cm. Total Length: 2.2″ (7 cm). Life Cycle : >1 million. Height : 0.43mm (0.017″), Resistance Variation: 30K-70K Ohms ±30%. Power Rating: 0.5 Watts.

Reference: RBD-0368

Force Sensitive Resistor 0.5"

2 reviews

Thickness: 0.4mm Trigger Force: 20g, triggered (default resistance<200kΩ)  Pressure Measuring Range: 20g~6kg Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz) Initial Resistance: >10MΩ Activation Time: <0.01S Operating Temperature: -40°C~+85°C  Lifespan: >1million times Hysteresis: +10%，(RF+ -RF-)/FR+，1000g...

Reference: RBD-1951

Anemometer/Wind Speed Measurement Sensor 0-5V

5 reviews

High hardness, Corrosion protection. Waterproofness and High precision. The mode of its output signal：0-5V(Voltage signal). supply voltage: DC 12-24V. Power consumption：Voltage MAX≤0.3W. Start wind speed：0.4-0.8m/s.

Reference: RBD-0417

Force Sensor Resistor Square 38.1mm

4 reviews

Easily customizable to a wide range of sizes Cost-effective Ultra-thin; 0.45 mm Robust; up to 10 million actuations Simple and easy to Integrate. RoboticsBD

Reference: RBD-1237

Brand: UNI-T

UNI-T Wind Speed Meter UT363BT

Ergonomic exterior, comfortable handling Millimeter accuracy  Large, multiple angle HD display Quick, auto calculation with real-time readout Multiple functions: measure wind speeds up to 30m/s, data storage, and more Auto power off after 3 minutes without operation  

Reference: RBD-0552

A6 Pro Serial GPRS GSM Module Core Development Board

7 reviews

Working frequency: quad-band network, 850 / 900 / 1800 / 1900MHz Working voltage: 4.8-9VDC(On-board voltage regulator circuit supply power for A6 module) Working Current: maximum of 2A. RoboticsBD

Reference: RBD-3579

Wind Direction Sensor Replacement Part for WH Series Wireless Weather Stations

This Wind Direction Sensor is a high-quality replacement component specifically designed for WH series wireless weather stations, including the WH2081 model. Whether you're maintaining your existing weather monitoring setup or replacing a faulty part, this sensor ensures accurate and reliable wind direction readings for continued environmental tracking.

Reference: RBD-0700

GY- BMI160 6DOF Gravity Accelerometer Sensor

2 reviews

Operating Voltage: 3.3V-5.5V Low Power Consumption High Accuracy Small Size

Reference: RBD-0982

Digital Barometric Pressure Sensor Module 0-40kPa

4 reviews

Model: HX710B Data Output Rate:10 SPS / 80SPS Max. Operating Current (mA):1.5 IC Package:16 Pin SOP

Reference: RBD-1018

Weighing Load Cell Sensor 5kg

16 reviews

Dimensions: 75 x 13 x 13 mm (L x W x H) Range: 5 kg Cable Length: 18 cm Fitting ScrewHole Size:  M3 Rated output: 1.0 0.1mV / V Nonlinear: 0.05% F.S Hysteresis: 0.0% F.S Repeatability: 0.05% F.S

Reference: RBD-0312

Arduino TTP229 16 Channel Digital Capacitive Switch Touch Sensor Module GM

3 reviews

Arduino TTP229 16 Channel Digital Capacitive Switch Touch Sensor Module GM

Reference: RBD-1854

Resistive Film Pressure Sensor Module Pin Header Analog Signal 200mm

This module is compatible with various microcontroller control boards, such as arduino series microcontrollers. The module contains 2 kinds of interfaces. The module comes with a 20cm wire, which is long enough for your use. It has a short response time and quick response.

Reference: RBD-1913

ADXL335 Module 3-axis Analog Output Accelerometer GY-61

6 reviews

Onboard LDO Voltage regulator Can be interfaced with 3V3 or 5V Microcontroller. Tap/Double Tap Detection Free-Fall Detection Analog output Build in ultra low noise linear LDO voltage regulator Built-in onboard filters, which reduce noise from the motor and other high current electronics Power LED

Reference: RBD-2149

50kg Half-bridge Experiments Body Scale Load Cell Sensor

1 review

Capacity (Kg): 50. Output Sensitivity (mv/v): 1.0±0.1. Nonlinearity (%FS): 0.03. Repeatability (%FS): 0.03. Input Resistance (Ω): 1000. Insulation Resistance (MΩ): ≥5000.

Reference: RBD-2172

Force Sensitive Resistor Square 40mm

Easily customizable to a wide range of sizes Cost-effective Ultra-thin; 0.45 mm Robust; up to 10 million actuations Simple and easy to Integrate. RoboticsBD Force Sensitive Resistor Square High Quality

Reference: RBD-2214

EMG Muscle Sensor With Cable And Electrodes Controller Detects Muscle Activity

3 reviews

EMG muscle sensor V3.0 with cable and electrodes Measures the electrical activity of muscles High signal quality for accurate and reliable measurement Adjustable gain and filtering for signal conditioning Compatible with various types of microcontrollers and data acquisition systems Comes with reusable electrodes and a 3.5mm jack cable for easy connection

Reference: RBD-2472

Amphenol FCI Clincher Connector 2 Position Male

Note: Please be aware that once the connector is closed it can't be unlocked

Reference: RBD-2851

Force Sensing Resistor Flexible Thin Pressure Sensor MD30-60 150g-20kg 30mm

Shape: Circular. Sensing Area diameter (mm): 30 Min Force: 150 gm. Max Force: 20Kg. Length (mm): 42. Weight (gm): 2.

Reference: RBD-2852

Force Sensing Resistor Flexible Thin Pressure Sensor RP-C18.3-LT 20g-6kg 18.3mm

Shape: Circular. Sensing Area diameter (mm): 18.3 Min Force: 20 gm. Max Force: 6Kg. Length (mm): 60. Weight (gm): 2.

Reference: RBD-2853

Force Sensing Resistor Flexible Thin Pressure Sensor RP-C5-LT 20g-1kg 5mm

Shape: Circular. Sensing Area diameter 5mm Min Force: 20 gm. Max Force: 1Kg. Length (mm): 65. Weight (gm): 2.