Reference: RBD-0013

AVR ISP MKII

Arduino Programming Supports fuses and lock bit programming Upgradeable for future device support Supports target voltages from 1.8V to 5.5V Adjustable ISP programming speed (50Hz to 8MHz SCK frequency) USB 2.0 compliant (full speed, 12Mbps) Powered from USB, does not require external power supply Target interface protection Short-circuit protection...

Reference: RBD-0029

Raspberry Pi Model B (Made in UK) (Retired)

The first-generation Raspberry Pi Model B was released in February 2012 SOC BCM2835 Memory 256 MB Standard Form Factor  Ethernet available. Wireless (Wifi/Bluetooth) not available. GPIO 26 pin

Reference: RBD-0044

Brand: SparkFun Electronics

FEZ Panda II

Description: The 72Mhz FEZ Panda II runs .NET Micro Framework, allowing users to program and debug FEZ Panda using Microsoft's free Visual C# Express. Applications are loaded over USB cable (or serial) with full featured debugging capabilities, such as stepping in code or inspecting variables.

Reference: RBD-0025

Arduino Ethernet Shield Basic

With this Ethernet Shield, your Arduino board can be connected to internet Uses ENC28J60 SPI Ethernet controller and compatible HR911102A RJ45 socket Web client application to use Arduino as a distributed network sensor Stackable by accepting prototype shield or any other boards with Arduino compatible interface

Reference: RBD-0039

HC-SRF05 Ultrasonic Sensor

Model: HY-SRF05 Voltage : DC5V  Static current : less than 2mA  Detection distance: 2cm-450cm  High precision: up to 0.3c

Reference: RBD-0021

High Torque Gear Motor

Voltage: 12V DC RPM:100RPM Diameter: 25mm Low Noise Shaft equips metal bushes for long life. Metal Gears for High performance It comes with High-Quality gears. High torque at very low Current Consumptions

Reference: RBD-0211

Leap Motion Controller (Retired)

(Retired) The Leap Motion Controller tracks both hands and all 10 fingers with pinpoint precision and incredible  speed. Setup is easy, just plug into your PC or Mac and launch Airspace, your home for Leap Motion apps. Play, create, and explore in a whole new way!In Airspace, the Leap Motion App store,

Reference: RBD-0170

Brand: SparkFun Electronics

RFID Starter Kit - Retail (Retired)

(Retired)

Reference: RBD-0037

Obstacle Avoiding Robot 2013

Obstacle Avoiding Robot is an intelligent device which can automatically sense the obstacle in front of it and avoid them by turning itself

Reference: RBD-0047

Brand: SparkFun Electronics

Maple

In the past, ARM processors were notoriously unfriendly in non-professional environments due to proprietary tool chains and unfamiliar instruction sets. Because of this, they were conspicuously absent from classrooms and hobbyists’ workbenches. LeafLabs aims to change this by providing an ARM tool-chain built from open source components and a programming...

Reference: RBD-0045

Netduino 2

Description: Netduino 2 is still the same Arduino shield compatible board you know and love, except faster with more code space. Powered by an STmicro Cortex-M3 microcontroller running at 120MHz, the Netduino 2 packs 192KB of code space and 60KB of RAM. With built-in hardware peripherals like UART, PWM, I2C, 12-bit ADC and DAC, the Netduino 2 is ready to...

Reference: RBD-0167

RFID Reader ID-20LA (125 kHz) (Retired)

(Retired) Description: RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-20LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is the 2mm pin spacing....

Reference: RBD-0048

BeagleBone

Description: The BeagleBone is a low-cost credit-card-sized Linux computer from BeagleBoard that connects with the Internet and runs software such as Android 4.0 and Ubuntu. It's smaller and lighter than their other boards like the BeagleBoard-xM and while it may not have quite the processing power that their large model does, the BeagleBone is perfect...

Reference: RBD-0334

9 Degrees of Freedom Breakout- MPU9150

1 review

The 9DOF MPU-9150 is the world’s first 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors. And guess what? You get to play with it.

Reference: RBD-0049

Gainer PSoC Development Board

Description: Gainer is a simple board developed by Shigeru Kobayashi and the team at Gainer.cc. This board utilizes the Cypress PSoC CY8C29466 IC making it a great board for digital and analog projects where AtoD and DtoA is required. Simple USB interface for reprogramming - no external programmer needed.

Reference: RBD-0050

Maple Mini

Description: The Maple is LeafLabs' 32-bit ARM development board. Coupled with the Maple IDE, the LeafLabs Maple line of development boards bring an Arduino style user experience to the world of powerful 32-bit ARM processors.

Reference: RBD-0035

Siemens LOGO PLC

Controls Operator and display panel with background lighting Power supply Interface for expansion modules Interface for the program module (card) and a PC cable Pre-configured standard functions, e.g. on- and off-delays, pulse relay and softkey Timer Digital and analog flags Inputs and outputs, according to the device type.

Reference: RBD-0042

Mini RC Quadcopter 2013 Robotics Bangladesh

Latest 6-axis flight control system with adjustable gyro sensitivity Permits super stable flight Lightweight airframe with nice durability

Reference: RBD-0043

FEZ Hydra Basic Kit

Description: FEZ Hydra is a 100% open-source (hardware and software) .NET Gadgeteer compatible mainboard running .NET Micro Framework. It incorporates a 240Mhz AT91SAMRL ARM9 processor. With 16MB of SDRAM an 4MB of FLASH, FEZ Hydra is capable or running the most complex applications. The Basic Kit includes the essential modules needed to get started with...