How to Place an Order
Store Pick Up
Request for Quotation/ International Sourcing
Order Status
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0351
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
Reference: 0245
Choose your desire Resistor value from below:
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: 1353
Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0761
Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical
The GY-BNO055 9DOF Absolute Orientation Sensor Module is a high-precision 9-axis IMU (Inertial Measurement Unit) breakout board that combines a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. Unlike traditional IMUs, the BNO055 simplifies complex motion tracking by integrating a high-speed ARM Cortex-M0 processor directly on the chip. This enables onboard real-time sensor fusion, providing accurate and stable orientation data without the need for external computation.
Store Pickup Available!
Free Ship Over 5000 BDT
Quality Product
No Warranty
No Replacement
GY-BNO055 9DOF Absolute Orientation IMU Sensor Module (I2C) – Accelerometer, Gyroscope, Magnetometer Fusion
Product Description:
The GY-BNO055 9DOF Absolute Orientation Sensor Module is a high-precision 9-axis IMU (Inertial Measurement Unit) breakout board that combines a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. Unlike traditional IMUs, the BNO055 simplifies complex motion tracking by integrating a high-speed ARM Cortex-M0 processor directly on the chip. This enables onboard real-time sensor fusion, providing accurate and stable orientation data without the need for external computation.
If you've previously struggled with combining accelerometer, gyroscope, and magnetometer data, the BNO055 takes the guesswork out of the process. It fuses sensor data automatically and delivers ready-to-use output such as Euler angles, quaternions, or motion vectors—all accessible over I2C.
Adafruit_BNO055 bno = Adafruit_BNO055(55, 0x29); Key Features:
Combines accelerometer, gyroscope, and magnetometer on a single chip
Onboard ARM Cortex-M0 processor performs real-time sensor fusion
Outputs orientation data as Euler angles, quaternions, or vectors
I2C communication interface (default address 0x28 or 0x29)
Fully self-contained, no need for complex external libraries or fusion algorithms
Compact and easy to integrate in embedded systems
Sensor Outputs:
Absolute Orientation (Euler, 100Hz): Three-axis orientation (360°)
Quaternion (100Hz): Four-point rotation representation
Angular Velocity (100Hz): Rotation speed (rad/s)
Acceleration (100Hz): Acceleration with gravity (m/s²)
Linear Acceleration (100Hz): Motion-only acceleration, gravity removed
Gravity Vector (100Hz): Gravity direction excluding motion
Magnetic Field (20Hz): Environmental magnetic field strength (μT)
Temperature (1Hz): Ambient temperature (°C)
How to Use with Arduino (I2C Configuration):
Close both I2C jumpers (solder bridges) on the module to enable I2C mode.
Connect wiring:
GND → GND
VIN → 3.3V
SDA → D2 (NodeMCU)
SCL → D1 (NodeMCU)
Install Arduino IDE 1.8.7 or newer.
Add the ESP8266 board via Board Manager and select NodeMCU 1.0 (ESP-12E Module).
Install Adafruit BNO055 and Adafruit Unified Sensor libraries.
Run the sensorapi example and modify the BNO initialization to: Adafruit_BNO055 bno = Adafruit_BNO055(55, 0x29);
Upload and start receiving data in seconds!
Technical Specifications:
Operating Voltage: 3.3V (VIN supports 3.3V input only)
Communication: I2C (default address 0x28/0x29 selectable)
Sensor Fusion Rate: Up to 100Hz
Built-in Processor: ARM Cortex-M0
Dimensions: Compact module form factor
Compatible with: Arduino, ESP8266, ESP32, STM32, etc.
Applications:
Robotics and Drone Stabilization
Head Tracking and Gesture Recognition
3D Motion Capture
Augmented/Virtual Reality
Smart Wearables and Navigation Systems
Package Includes:
1 x GY-BNO055 9DOF IMU Sensor Module (Pre-soldered headers may not be included)
Why Choose GY-BNO055?
Get precise 3D orientation without spending weeks on sensor fusion math. The GY-BNO055 brings plug-and-play simplicity to complex motion sensing, making it ideal for engineers, hobbyists, and educators alike.
Take your motion projects to the next level—add the GY-BNO055 to your cart today!
The latest price of GY-BNO055 9DOF Absolute Orientation IMU Sensor Module (I2C) – Accelerometer, Gyroscope, Magnetometer Fusion in Bangladesh is BDT 1,750 You can buy the GY-BNO055 9DOF Absolute Orientation IMU Sensor Module (I2C) – Accelerometer, Gyroscope, Magnetometer Fusion at best price from our RoboticsBD or visit RoboticsBD Office.
|
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. |
|
Product Images are shown for illustrative purposes only and may differ from the actual product. |
Reference: RBD-0430
Operating voltage: 4.5V to 5.0 V Output format: 8 Digital voltages. Optimal sensing distance: 0.125″ (3 mm). RoboticsBDThis is the clone variant of popular QTR-8RC Sensor If you need the QTR-8RC Sensor: Click Here If you need the QTR-8A Sensor: Click Here
Reference: RBD-0355
Description:Working voltage: 4.5V to 5.5 V.Transmit tube pressure drop: Vf = 1.6 VTransmit tube current: 20 mASignal output: A, B two way; The TTL levelDistinguish precision: 0.01 mmMeasurement frequency, 100 KHZEncoder diameter: 24 mmEncoder type D hole diameter: 4 mmThe encoder resolution: 20 line
Reference: RBD-0288
Three selectable full scales (250/500/2000dps) Factor in all g-ranges, up to 13-bit resolution at ±16 g 12-Bit ADC Coupled with Low Noise ARM Sensors Achieves 5 milli-gauss Resolution in ±8 Gauss Fields Pressure range:300 to1100hPa (+9000m to -500m above sea level) I2C interfaces Power supply: 3-5v
Reference: RBD-0022
This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit. There are only four pins that you need to worry about on the HC-SR04: VCC (Power),...
Reference: RBD-3101
Wide detecting scope Fast response (less than 1s) High sensitivity( 3%) the circuit voltage: DC5V Stable and long life Operating Voltage is +5V Detect/Measure NH3, Ammonia
Reference: RBD-1248
Speed(RPM):19000 Motor diameter: 6mm Shaft diameter: 0.8mm Shaft length: 4mm Rated voltage: 1.5V-3.1V
Reference: RBD-3644
The Piezoelectric Sensor/Transducer/Buzzer – 35mm Diameter is a highly sensitive vibration sensor ideal for audio detection and impact sensing applications. Built using a copper and ceramic composite, this robust piezo disk is designed for consistent analog signal output in response to pressure, vibration, or acoustic input. Its compact and lightweight...
Reference: RBD-1173
Input Current : 100A Frequency: 50HZ-150KHZ Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W) Output Plug 3.5mm Dielectric Strength 6000V AC/1min Meet UL94-V0 flame retardant properties
Reference: RBD-2710
The Eye Blink Detection Analog & Digital Sensor with Goggles is a powerful tool designed for Arduino enthusiasts, developers, and researchers interested in human-computer interaction and biometric sensing. Why is an analog eyeblink sensor better than a digital eyeblink sensor? Currently, most eye blink sensors on the market are digital. they can only...
Reference: RBD-2083
Operating Voltage : 5v. Temperature measurement range : -55°C to 125°C. Measurement Accuracy : ±0.5°C.
Reference: RBD-1946
Comes with the BME280 sensor. Pressure accuracy of ±1 hPa. Temperature accuracy ±1.0°C. Altimeter accuracy ±1 meter. Humidity: +-3%
Reference: RBD-1740
Operating voltage: 3.3 to 5VDC Ball Rolling type of tilt sensor. This small module is easy to use. A fixed bolt hole for easy installation Wide voltage LM393 comparator
Reference: RBD-2933
Brand: DFRobot
The RPLIDAR C1 is a new generation fusion-type DTOF (Direct Time of Flight) laser scanner from SLAMTEC. This advanced LIDAR system excels in high-definition detection of small and nearby objects, offering superior anti-interference and anti-adhesion capabilities. With a measurement radius of 12 meters, a sampling frequency of 5000 times per second, and...
Reference: RBD-0673
Detecting range: 300~10000ppm Signal output indicator. Dual Signal output (analog output and TTL output). The TTL output signal is low level, allows us to connect with SCM directly. Analog output 0~5V voltage. Quick response and recovery. RoboticsBD
Reference: RBD-2445
Uses ultrasonic sound waves to detect obstacles and measure distance
Reference: RBD-3220
Brand: Hi-Link
The HLK-FM225 Face Recognition Module is a cutting-edge facial recognition solution designed for advanced security systems and smart home devices. Utilizing a deep learning infrared face recognition algorithm, this module ensures high accuracy (98.85%) and supports multi-angle face detection for diverse applications. It features both UART and USB...
Reference: RBD-0555
Low-noise analog signal path Device bandwidth is set via the new FILTER pin 5 µs output rise time in response to step input current Small footprint, low-profile SOIC8 package 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 Supply Voltage: 4.5V~5.5V DC Measure Current Range: 30A Sensitivity: 100mV/A
Reference: RBD-0414
A probe by new original installation import DS18B20 temperature sensor chip. RoboticsBD Chip each pin use heat shrinkable tube to prevent short circuit, internal sealing glue, waterproof, moistureproof. Stainless steel tube encapsulation waterproof moistureproof prevent rust. Stainless steel shell (6 * 45 mm), lead length 100 cm (shielding wire) use...
Reference: RBD-2141
Rating contract (Max.): 10 W Switching power supply (Max.): 110VDC Resistance contract (Max.): 100 Ω Appro. Float Ball Size (mm) : 24×17 (LxD) Body Total Length (mm) : 85 Cable Length (cm) : 37 Total Float opening: 70° Switch ON/OFF angle Approx. betn 15° to 20°
Reference: RBD-2341
GY-31 TCS3200 Color Sensor Module with programmable light-to-frequency conversion High-resolution detection of color intensity, output as a square wave Compatible with Arduino, Raspberry Pi, and other microcontrollers Operating voltage: 2.7V to 5.5V with power-down feature for energy efficiency Compact design, stable temperature coefficient for reliable...
Reference: RBD-1377
Module Name:CJMCU-4541 Sensor: MICS-4514 Type: Carbon Monoxide Nitrogen Oxygen Sensor
Reference: RBD-1424
Onboard precision microcurrent transformer. Onboard sampling resistor. The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA. Rated input current: 5A Rated output current: 5mA Change: 1000: 1 The linear range: 0 ~ 10A (100 ohms) Linearity: 0.2%
Reference: RBD-0572
Operating Power: 60mW/15fpsVGAYUV. Sleeping Mode: <20 uA. Lens Size: 1/6″. Max. Frame Rate: 30fps VGA. Sensitivity: 1.3V / (Lux-sec). dynamic range: 52 dB. Electronic Exposure: 1 to 510 row.
Reference: RBD-2980
Working voltage range: DC 5 – 18V. Load capacity: ≤ 10 mA (DC 5V). Working temperature: ≤ 80 ℃ Lightweight, small size, easy to install. Inlaid with stainless steel impeller shaft, durable wearable. The seal ring with the upper and lower force structure never leaks. Non-violent shock, and chemical erosion.
Reference: RBD-0813
Operating Voltage: 5VDC. Current: 30mA (MAX). Operating temperature: -30 ° C to 80 ° C. Compatible with Arduino, Raspberry Pi, AVR, PIC, etc. Measuring Range: 0 ~ 1000 NTU.
Reference: RBD-1935
Water-level sensor indicates the level of water in an overhead tank Gold coated Long life time Simple working procedure
Reference: RBD-2395
Brand: Hi-Link
24 GHz mmWave Radar Sensor: Tracks up to 3 moving targets with precise motion localization. Compact Design: Ultra-small size (15mm x 44mm) for versatile applications in smart devices. High Precision: Detects motion, distance, angle, and speed with advanced FMCW radar technology. Environmental Adaptability: Functions reliably in varying conditions,...
Reference: RBD-0680
Acceleration, Gyroscope Power Supply: DC3.3V-5V Chip: MPU9250 Size: 22 mm x 17 mm. Gyro range : ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g 9 DOF modules. RoboticsBDChinese Variant MP92 QFN24 PackageThe magnetometer is currently inaccessible via I2C and therefore unavailable.True 9dof: Gravity 10 DOF IMU AHRS BNO055 + BMP280 True 9dof:...
Reference: RBD-0830
Thermocouples - K Type 800C WRN-291 200mm Rod 7.8 inch Rod/ 200mm Rod Temperature measurement range is from 0 celsius to 800 celsius degree. Screw Type
Reference: RBD-2103
Remote control distance: more than 8 meters Crystal: the oscillation frequency of 455 IR carrier frequency: 38KHz Output form: Digital Power Supply: CR2032 Battery Pointing Angle: up to 60º Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000 click
Reference: RBD-0382
3-axis Gyro+Acceleration+Magnetic Fiel Air Pressure Module Power supply: 3-5V Build in ultra low noise linear LDO voltage regulator Built-in onboard filters, which reduce noise from motor and other high current electronics You can easily select two I2C address for MPU6050 by soldered jumper. RoboticsBD
Reference: RBD-1953
Input Voltage:DC 4.5-24V Module Size: 10 x 20 mm Adjustable Range:0.8-17V,fixed voltage (1.8V 2.5V 3.3V 5V 9V 12V) Output Current:3A (max),actual testing input 12V output 1.5A Transform Efficiency:97.5%(max) (6.5 to 5V 0.7A) Switch Frequency:500KHz Output Ripple Wave:20mV (12V to 5V 3A) 20m band width
Reference: RBD-1692
Color: Black lightweight Convenient to carry this battery box holder with wires Weight: About 9g Wire Length: Approx 14cm
Reference: RBD-0829
Material: Aluminium M3 Screws Adjustable type servo arm Mounting Hole Spacing: 14mm Servo disc diameter: 20mm 25Tooth Weight: 2 gm
Reference: RBD-2269
Adds WiFi and Bluetooth connectivity to your projects, great for IoT and automation applications Integrated antenna and RF balun, power amplifier, and other features in a small printed circuit board area Low power consumption and safe, reliable, and scalable RF properties Supports Lua programming and Win10 system automatic installation drive Small form...
Reference: RBD-1764
High Power DC-DC Step Down Module Input Voltage: 5-40V DC Output Voltage: 1.2-36V DC Efficiency: 95% Maximum Power: 200W
Reference: RBD-2476
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size fingers you have, but not so easy that they'll get flipped by accident. Work great as on/off switches or selector switches, the middle pin is connected to either...
Reference: RBD-0331
Suitable for heavier goods and pressure resistance High elastic shock absorption for quiet operation Omni-directional wheel for flexible handling Thickened steel frame for increased bearing capacity Prevents floor damage from small objects
Reference: RBD-0829
Material: Aluminium M3 Screws Adjustable type servo arm Mounting Hole Spacing: 14mm Servo disc diameter: 20mm 25Tooth Weight: 2 gm
Reference: RBD-0331
Suitable for heavier goods and pressure resistance High elastic shock absorption for quiet operation Omni-directional wheel for flexible handling Thickened steel frame for increased bearing capacity Prevents floor damage from small objects
Reference: RBD-0382
3-axis Gyro+Acceleration+Magnetic Fiel Air Pressure Module Power supply: 3-5V Build in ultra low noise linear LDO voltage regulator Built-in onboard filters, which reduce noise from motor and other high current electronics You can easily select two I2C address for MPU6050 by soldered jumper. RoboticsBD
Reference: RBD-1953
Input Voltage:DC 4.5-24V Module Size: 10 x 20 mm Adjustable Range:0.8-17V,fixed voltage (1.8V 2.5V 3.3V 5V 9V 12V) Output Current:3A (max),actual testing input 12V output 1.5A Transform Efficiency:97.5%(max) (6.5 to 5V 0.7A) Switch Frequency:500KHz Output Ripple Wave:20mV (12V to 5V 3A) 20m band width
Reference: RBD-1764
High Power DC-DC Step Down Module Input Voltage: 5-40V DC Output Voltage: 1.2-36V DC Efficiency: 95% Maximum Power: 200W
Reference: RBD-3586
Brand: Raspberry Pi Official
Unlock next-level embedded computing performance with the Raspberry Pi Compute Module 5 (CM5104032) bundled with the Compute Module 5 IO Board (CM5IO). Designed for industrial, embedded, and advanced maker applications, this powerful combination brings the desktop-grade performance of the Raspberry Pi 5 into a compact, customizable system-on-module (SoM)...
Reference: RBD-3343
The CJMCU Bosch BME280 Sensor Module is an advanced temperature, humidity, and atmospheric pressure sensor designed for high accuracy and low power consumption. Powered by Bosch's BME280 sensor chip, this multi-functional environmental sensor provides precise data, making it ideal for weather monitoring, GPS navigation, indoor climate control, wearable...
Reference: RBD-1813
ICM-20948 MEMS Motion Tracking Device Sensor Board 9 Axis
The GY-BNO055 9DOF Absolute Orientation Sensor Module is a high-precision 9-axis IMU (Inertial Measurement Unit) breakout board that combines a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. Unlike traditional IMUs, the BNO055 simplifies complex motion tracking by integrating a high-speed ARM Cortex-M0 processor directly on the chip. This enables onboard real-time sensor fusion, providing accurate and stable orientation data without the need for external computation.
