Reference: RBD-3204

PMS Adapter Conversion Board GM1705 - 1.25T to 2.54 for PMS Sensors

1 review

The PMS Adapter Conversion Board GM1705 is a versatile and reliable adapter designed to bridge 1.25T pitch connectors to 2.54 pitch connectors. Specifically crafted for seamless integration with PMS dust sensors such as PMS1003, PMS3003, and PMS5003 (including G1, G3, G5, G7, and G10 variants), this adapter simplifies sensor connectivity and ensures...

Reference: RBD-3211

Dust/Air Purity Sensor PM1.0/PM2.5/PM10 - PMS7003 - 3.3V UART with Adapter Board

The PMS7003 Dust Sensor is a highly precise module designed to monitor air quality by measuring particulate matter (PM) concentrations, including PM1.0, PM2.5, and PM10. This sensor detects particles as small as 0.3 µm, making it ideal for monitoring pollutants such as cigarette smoke and vehicle exhaust. Its compact design and advanced laser-based...

Reference: RBD-3235

Brand: DFRobot

Gravity Digital Shake Sensor

Do you want to switch lights by just shaking your hand? However, you may don't want to use a complicated and costly triple axis accelerometer. This digital shake sensor is sure to meet your needs.

Reference: RBD-3281

SW-18010P Vibration Sensor Module

The SW-18010P Vibration Sensor Module is a highly sensitive vibration detection module designed for motion sensing and impact detection applications. It operates by using an internal spring mechanism inside a metal casing. When vibration or movement occurs, the spring inside makes contact with the metal case, creating a circuit connection. Once the...

Reference: RBD-3655

SGP30 Multi-Pixel Air Quality Sensor Module TVOC & eCO2

Monitor your indoor air quality with precision using the SGP30 Multi-Pixel Air Quality Sensor Module. Developed by Sensirion, this compact, high-performance sensor integrates four metal oxide sensing elements into one chip, delivering detailed and reliable measurements of Total Volatile Organic Compounds (TVOC) and equivalent CO2 (eCO2) levels. Ideal for...

Reference: RBD-2793

Ultrasonic oxygen sensor OCS-3F

Cost-Effective Oxygen Detection Dual Detection Reliable Performance Versatile Outputs Compact & Easy to Use *Not a medical device*

Reference: RBD-3656

Shake Sensor Module Vibration/Movement Detection Switch

The Shake Switch Module is a simple and compact motion detection sensor that responds to directional shaking or vibration. Designed to output a high signal when activated, this module is ideal for basic motion-triggered projects such as alarms, interactive electronics, or energy-saving systems. It operates reliably on 3.3V to 5V, making it compatible with...

Reference: RBD-2794

Ultrasonic oxygen sensor OCS-3F with LCD and Power Supply

All-in-one Oxygen Monitoring: This complete kit combines the OCS-3F ultrasonic sensor with an LCD display and power supply for convenient oxygen concentration and flow rate monitoring. Enhanced User Experience: The large LCD screen displays real-time oxygen concentration (21% - 95.6%), flow rate (up to 20 L/min), and room temperature for clear and easy...

Reference: RBD-2835

Explosive Gas Sensor Figaro TGS813-A00 Original

The sensor has high sensitivity to gases such as methane, propane, butane and hydrogen. The supply voltage is 24 V. Measuring range is up to 10,000 ppm.

Reference: RBD-2839

Explosive Combustible Gas Sensor TGS813

1 review

The TGS 813 Combustible Gas Sensor is a versatile and reliable solution for detecting a wide range of combustible gases. With its high sensitivity and long life, this sensor is ideal for applications such as domestic gas leak detectors, portable gas detectors, and more. This is generic TGS813 Manufactured in China

Reference: RBD-3101

MQ-137 Ammonia Gas NH3 Sensor Module

2 reviews

Wide detecting scope Fast response (less than 1s) High sensitivity( 3%) the circuit voltage: DC5V Stable and long life Operating Voltage is +5V Detect/Measure NH3, Ammonia

Reference: RBD-3115

MQ-131 Ozone Gas Detector Sensor Module

1 review

Fast response characteristics Mounting holes to facilitate fixed installation The probe can plug design for easy testing. Signal light indicates the output Dual signal output (analog output, and TTL-level output) TTL output valid signal is low; (low output signal light, can be accessed by the microcontroller IO port)

Reference: RBD-3116

MQ-214 Methane Sensor Combustible Gas Sensor

1 review

The MQ-214 methane (CH4) gas sensor is specifically designed for the accurate detection of methane concentrations in the air, delivering analog voltage outputs proportional to gas levels. Renowned for its wide detection range, rapid response time, high sensitivity, and long-term durability, this sensor is an excellent solution for gas leakage detection in...

Reference: RBD-3168

Figaro TGS2603 Unpleasant Odors Stale Food Air Pollution Sensor

The Figaro TGS2603 is a semiconductor sensor designed to detect unpleasant odors, air pollution, and stale food. With its high sensitivity and reliable performance, it is ideal for a variety of environmental monitoring and air quality applications. This compact sensor operates on a 5V supply voltage and outputs an analog signal, making it easy to...

Reference: RBD-3283

Base PCB Board MQ Gas Sensors

1 review

The Base PCB Board for MQ Gas Sensors is a dedicated platform designed to provide a quick and easy way to interface MQ-series gas sensors (MQ-2 to MQ-9) with microcontrollers and embedded systems. This board simplifies the wiring and operation of MQ gas sensors, making them plug-and-play for various air quality monitoring and gas detection applications.

Reference: RBD-3284

MC105 Methane Gas Sensor Module

The MC105 Methane Gas Sensor Module is a high-precision catalytic-type sensor designed for detecting combustible gases such as methane (CH4), propane (C3H8), LPG, and CO. It operates using a catalytic combustion principle, where a test element reacts to combustible gases and changes its resistance, generating a proportional voltage output that represents...

Reference: RBD-3307

ZE08-CH2O Formaldehyde Concentration Measurement Module

1 review

The ZE08-CH2O Formaldehyde Concentration Measurement Module is a compact electrochemical sensor designed for precise formaldehyde (CH2O) detection in the air. Utilizing electrochemical principles, this module offers high selectivity, stability, and reliability, making it an ideal choice for air-quality monitoring, smart home applications, and industrial...

Reference: RBD-3347

Brand: DFRobot

Fermion MEMS Odor Smell Gas Detection Sensor

2 reviews

Fermion: MEMS Odor Smell Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (＜20mA), minimal heat generation, short preheating time, and swift response recovery. The sensor can qualitatively measure odor gas concentration, suitable...

Reference: RBD-3348

Brand: DFRobot

Fermion MEMS Methane CH4 Gas Detection Sensor

1 review

Fermion: MEMS Methane CH4 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (＜20mA), minimal heat generation, short preheating time, and swift response recovery. The sensor can qualitatively measure methane gas concentration and...

Reference: RBD-3349

Brand: DFRobot

Fermion MEMS Smoke Gas Detection Sensor

Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (＜20mA), minimal heat generation, short preheating time, and swift response recovery. The sensor can measure smoke concentration qualitatively and is suitable...