Uni-T UTD2102CEL 1G Digital Storage Oscilloscope 100MHz Wide Screen. RoboticsBD
Store Pickup Available!
Free Ship Over 5000 BDT
Quality Product
No Warranty
No Replacement
Uni-T UTD2102CEL 1G Digital Storage Oscilloscope 100MHz Wide Screen RoboticsBD
Features:
| Model : | UTD2102CEL |
| Bandwidth: | 100 MHz |
| Rise Time: | ≤3.5 ns |
| Real-time Sampling Rate: | 1GS/s |
| Equivalent Sampling Range: | 50GS/s |
| Vertical Sensitivity: | 1mV ~ 20V/div |
| Record Length (Max): | 2 x 600k |
| Scan Time Base: | 2ns ~ 50s/div |
| Trigger Type: | Edge, Pulse, Alternate |
| Automatic Waveform Measurements: | 28 |
| Frequency Counter: | 6 digits frequency counter |
| Ports: | USB OTG |
| Mathematics: | Add, Subtract, Multiply, Divide, FFT |
| Other Features: | Special Print Screen Feature |
Specifications:
| Power: | 100 - 240VACRMS, 45Hz -440Hz, CAT II |
| LCD Size: | Diagonal 178mm (7 inches) |
| Product Color: | Red and Grey |
| Product Net Weight: | 3.2kg |
| Product Size: | 306mm x 147mm x 122mm |
| Accessories: | Probe x 2 (1x, 10x switchable), Power Cord and English Manual UT-D05 USB Cable, PC Communication Software |
Package includes:
- 1 unit UTD2102 CEL
- 2 units of 100Mhz X1 X10 probes up to 1600V
- Power cord
- English manual, CD
The latest price of Uni-T UTD2102CEL 1G Digital Storage Oscilloscope 100MHz Wide Screen in Bangladesh is BDT 30,000 You can buy the Uni-T UTD2102CEL 1G Digital Storage Oscilloscope 100MHz Wide Screen at best price from our RoboticsBD or visit RoboticsBD Office.
|
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. |
|
Product Images are shown for illustrative purposes only and may differ from the actual product. |
Reference: RBD-2230
Main chip: NE555 Input Voltage: 5V-15V DC. Generate an adjustable pulse for MCU. Generate an adjustable pulse, to control circuitry associated.
Reference: RBD-2228
Working voltage: 2.3V-5.5V. Working temperature range: -40 ~ + 105. Onboard 25MHZ (accuracy of 50ppm) active crystal. On-board high-speed amplifiers
Reference: RBD-2207
2 sine wave and 2 square wave output. AD9850: 0-40MHz. After the 20-30MHz frequency harmonics increases, the waveform will be less and less clean. Low-pass filter with 70MHz, so the waveform better than SN. Parallel and serial data input can be selected via a jumper.
Reference: RBD-1554
Model Name/Number: UTD2012CEX Brand: Uni-T Bandwidth: 100MHz Usage/Application: Industrial Channels: Dual Usage: Industrial
Reference: RBD-1869
This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen. Adjustable vertical displacement, and with instructions. With automatic, regular and one-shot modes, easy to capture the moment waveform. Available rising or falling edge trigger. Observable previous trigger waveform (negative delay). Can freeze at any...
Reference: RBD-2233
Absolutely Open Hardware Rising/falling edge trigger Compact rectangular housing Large display screen Buttons on the side Mini pocket-sized Compact and lightweight Store file as BMP, DAT, BUF, or CSV format Use built-in flash disk to save/read waveform image Math waveforms: DATA, -DATA, Inp+D, Inp-D, -Inp Output test signal: 10Hz—1MHz (1-2-5 sequence...
Reference: RBD-1039
The module was recycled from a mobile phone so you can say it is used. TTL serial port for serial port, you can link directly to the micro-controller. Don’t need MAX232. Power module automatically boots, homing network. Onboard signal lights all the way. It flashes slowly when there is a signal, it flashes quickly when there is no signal. In recent years...
Reference: RBD-1138
Board Based On AI-Thinker A9 GPRS Module Supports Firmware Upgrade Via Serial Port Operating Voltage: 5v
Reference: RBD-0133
830 Solder-less Points Ideal for Experimenting With Circuit Design In Labs Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components Colored coordinates for easy components placement. Accept a variety of wire sizes 20-29 AWG
Reference: RBD-1159
Removes all Solder Residue Low cost and high-quality Ideal replacement for the old sponges. Removes excess solders from soldering iron tips Provides extended tip life
Reference: RBD-0694
Power input: 4.5V ~ 9V (10VMAX), USB-powered Transfer rate: 110-460800bps Support UART / GPIO data communication interface Support Smart Link Smart Networking Working temperature: -40°C ~ + 125°C Drive Type: Dual high-power H-bridge Don’t need to download resetting A great set of tools to develop ESP8266 Flash size: 4MByte Lowest cost WI-FI Note: The...
Reference: RBD-1541
For beginners who are interested in Arduino A complete set of Arduino’s most common and useful electronic components Infrared sensor receiving module Laser sensor module Temperature and humidity sensor module Infrared sensor module 5v relay module Obstacle avoidance sensor module.
Reference: RBD-1554
Model Name/Number: UTD2012CEX Brand: Uni-T Bandwidth: 100MHz Usage/Application: Industrial Channels: Dual Usage: Industrial
Reference: RBD-1811
AS5600 Magnetic Induction Angle Measurement Sensor
Reference: RBD-1554
Model Name/Number: UTD2012CEX Brand: Uni-T Bandwidth: 100MHz Usage/Application: Industrial Channels: Dual Usage: Industrial
Reference: RBD-1869
This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen. Adjustable vertical displacement, and with instructions. With automatic, regular and one-shot modes, easy to capture the moment waveform. Available rising or falling edge trigger. Observable previous trigger waveform (negative delay). Can freeze at any...
Reference: RBD-2207
2 sine wave and 2 square wave output. AD9850: 0-40MHz. After the 20-30MHz frequency harmonics increases, the waveform will be less and less clean. Low-pass filter with 70MHz, so the waveform better than SN. Parallel and serial data input can be selected via a jumper.
Reference: RBD-2228
Working voltage: 2.3V-5.5V. Working temperature range: -40 ~ + 105. Onboard 25MHZ (accuracy of 50ppm) active crystal. On-board high-speed amplifiers
Reference: RBD-2230
Main chip: NE555 Input Voltage: 5V-15V DC. Generate an adjustable pulse for MCU. Generate an adjustable pulse, to control circuitry associated.
Reference: RBD-2233
Absolutely Open Hardware Rising/falling edge trigger Compact rectangular housing Large display screen Buttons on the side Mini pocket-sized Compact and lightweight Store file as BMP, DAT, BUF, or CSV format Use built-in flash disk to save/read waveform image Math waveforms: DATA, -DATA, Inp+D, Inp-D, -Inp Output test signal: 10Hz—1MHz (1-2-5 sequence...
Uni-T UTD2102CEL 1G Digital Storage Oscilloscope 100MHz Wide Screen. RoboticsBD
