Reference: RBD-0151

Flame Sensor Fire Detection Module

59 reviews

Output Channel: 1 Power Supply: 3.3/5V Built in a potentiometer for sensitivity control. Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO. Detection angle about 60 degrees, the flame spectrum especially sensitive. The flame of the most...

Reference: RBD-0431

Formaldehyde/ Formalin Detection Sensor CJMCU-1100 MS1100

2 reviews

Working temperature : -10℃ ~ 50℃ Working humidity : below saturation point Storage temperature : -20℃ ~ 80℃ RoboticsBDPCB Color: Red or Purple 

Reference: RBD-0423

5 Way Flame/Fire Sensor

2 reviews

Detecting range: >120 degree Analog and digital outputs On-board potentiometer and indicators 1% resistors to make this module more reliable and precise Operating Voltage: 3.3V – 9V Board Diameter: 40 mm.

Reference: RBD-0687

BMP280 Pressure Sensor Module

17 reviews

Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V. Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C). Peak current: 1.12mA. RoboticsBD Operating Pressure: 300 hPa to 1100 hPa. Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.

Reference: RBD-1201

TFMini S - Micro LiDAR Module

1 review

Measurement range: 12 m. Operating Voltage: 5V. Power : 0.12w. Weight: 6 gm. Compatible with Pixhawk Controller. Frequency: 100Hz

Reference: RBD-0672

MQ-3 Alcohol Gas Sensor

9 reviews

Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off). Current Consumption: 150mA. RoboticsBD DO output:  0.1 and 5V. AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V Detecting Concentration: 0.05-10mg/L Alcohol.

Reference: RBD-0823

Optical Sensitive Resistance Light Detection Photosensitive LDR Sensor Module

39 reviews

LDR module 4 PIN Operating voltage 3.3V-5V Signal output indicator light. LDR module 4 PIN Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)

Reference: RBD-1205

Slamtec RPLIDAR A1 2D 360 Degree 12 Meters LIDAR Sensor

4 reviews

Distance Range (Radius): 0.15m to 6m, white objects (Diameter Range – 12m) Angular Range: 0 ~ 360º Distance Resolution: < 0.5mm Angular Resolution: <= 1 º Sample Duration: 0.5 ms Sample Frequency: >=8000 Hz Scan Rate: 1 ~ 10Hz, Typical 5.5Hz

Reference: RBD-1376

MPXV7002DP Pressure Sensor Module

1 review

SensorModule : MPXV7002DP Measurement Range: 1psi, 100m/s (223mph/360kmh). Resolution: 0.84Pa. Data: Delivered at 14 bits from a 24 bit delta-sigma ADC. Low pass filtered Temperature compensated 10° to 60°C

Reference: RBD-0673

MQ-4 Methane Natural Gas Sensor

10 reviews

Detecting range: 300~10000ppm Signal output indicator. Dual Signal output (analog output and TTL output). The TTL output signal is low level, allows us to connect with SCM directly. Analog output 0~5V voltage. Quick response and recovery. RoboticsBD

Reference: RBD-0982

Digital Barometric Pressure Sensor Module 0-40kPa

4 reviews

Model: HX710B Data Output Rate:10 SPS / 80SPS Max. Operating Current (mA):1.5 IC Package:16 Pin SOP

Reference: RBD-2100

Flame Sensor Module Digital & Analog Output

18 reviews

Comparator chip LM393 makes module readings stable. Operating voltage 3.3V-5V. Fast Response Time Sensitivity adjustable Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm. Detection range: up to 100 cm. Adjustable detection range. Detection angle about 60 degrees, it is sensitive to the flame spectrum.

Reference: RBD-0674

MQ-5 Smoke Gas Detector Sensor

7 reviews

Model: MQ-5 Operating Voltage: 5V DC Operating Temparature:-20~40 degree celcius

Reference: RBD-1227

3D Scanner Laser Desktop- DIY Red

Object Scanning Device with USB 2.0 Interface / CMOS Sensor

Reference: RBD-1847

Pressure Sensors with Display SPABT-P10-R18-2N-K1-SA

Compact Design Country Specific pressure Multiple Displayable Unit Multi-colored, two-part display Alphanumeric display Discontinued by Manufactured 2017

Reference: RBD-3047

Dual IR Flame Sensor Module Dual Digital Output

The Dual IR Flame Sensor Module features two independent sensors with separate digital outputs, making it ideal for precise flame and light source detection. Utilizing dual voltage comparators for analog-to-digital conversion, this module provides accurate and reliable results.

Reference: RBD-0675

MQ-6 LPG Gas Sensor

10 reviews

Model: MQ-6 Operating Voltage: 5V DC Detecting Range:200-10000 ppm Relative Humidity:<95% RH

Reference: RBD-1235

Brand: UNI-T

Laser Rangefinder UNI-T LM60

Ergonomic exterior, comfortable handling Millimeter accuracy  Large, multiple angle HD display Quick, auto calculation with real-time readout Physical leveler Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more Auto power off after 3 minutes without operation  

Reference: RBD-1848

Pressure Sensors with Display SPABT-P10-R18-2N-K2-B-SA

Compact Design Country Specific pressure Multiple Displayable Unit Multi-colored, two-part display Alphanumeric display

Reference: RBD-3501

Flame Sensor Relay Module

The Flame Sensor Relay Module is a versatile and highly sensitive flame detection system capable of detecting fire or light sources in the 760nm to 1100nm wavelength range. Designed for practical applications, the module features a relay output, enabling it to control high-current electrical equipment directly, such as alarms, fans, or even cutting off...