How to Place an Order
Store Pick Up
Request for Quotation/ International Sourcing
Order Status
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0351
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
Reference: 0245
Choose your desire Resistor value from below:
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: 1353
Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0761
Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical
The Mars S Smart Rover Control Board is a versatile, open-source microcontroller board designed for robotics and smart rover projects. Built around the reliable ATmega328P chip, this board supports both Arduino IDE and Mixly graphical programming, making it perfect for beginners, students, and developers alike.
Store Pickup Available!
Free Ship Over 5000 BDT
Quality Product
No Warranty
No Replacement
The Mars S Smart Rover Control Board is a versatile, open-source microcontroller board designed for robotics and smart rover projects. Built around the reliable ATmega328P chip, this board supports both Arduino IDE and Mixly graphical programming, making it perfect for beginners, students, and developers alike.
The 2019 upgrade improves upon the 2016 version by enhancing USB stability, improving motor control interfaces, and resolving buzzer heating issues. It integrates key components like a 5V 1.5A power conversion IC, onboard buzzer, voltage detection, and dual-channel DC motor drivers—allowing you to control two motors without additional drivers.
Key Features:
Based on ATmega328P microcontroller
Fully compatible with Arduino IDE and Mixly graphical programming
Onboard dual DC motor control (2 channels, 1.2A each)
USB-to-Serial interface for easy programming
Integrated 5V 1.5A power conversion IC
Onboard buzzer and voltage detection
Compact design with dedicated fixing holes for smart rover chassis
Ideal for smart robots, autonomous vehicles, and educational kits
Technical Specifications:
Microcontroller: ATmega328P
Flash Memory: 32KB
SRAM: 2KB
PWM Outputs: 6
Analog Inputs: 8
Digital I/O Ports: 24
Communication Ports: 1 UART, 1 I2C, 1 ISP
Operating Voltage (VCC): 6–12V DC
5V Output Current: Up to 1.5A
DC Motor Drive Output: 2 channels at 1.2A each
No-load Current: 18mA
Board Dimensions: 65mm × 50mm × 13mm max height
Mounting Hole Diameter: 3mm
How to Use:
Connect to your PC via USB for programming using Arduino IDE or Mixly.
Power the board via DC socket (6–12V).
Connect DC motors to the motor terminals to control directly via the board.
Use the I/O ports to interface with sensors, LEDs, and other modules.
Utilize built-in buzzer and voltage detection for interactive feedback and monitoring.
Applications:
Smart rover and robotic vehicle platforms
Educational electronics and coding kits
DIY automation systems
Arduino-based prototype development
IoT hardware control boards
Package Includes:
1 × Mars S Smart rover Control Board
Why Choose This Product?
The Mars S Control Board offers a powerful blend of motor control, sensor integration, and development flexibility in a compact, beginner-friendly package. With full support for graphical and text-based programming, it’s an excellent tool for turning your robotics ideas into reality.
Start building smarter robots today with the Mars S Smart Rover Control Board – where reliable hardware meets versatile development!
The latest price of Mars S Smart Rover Control Board Arduino ATmega328P in Bangladesh is BDT 2,890 You can buy the Mars S Smart Rover Control Board Arduino ATmega328P at best price from our RoboticsBD or visit RoboticsBD Office.
|
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. |
|
Product Images are shown for illustrative purposes only and may differ from the actual product. |
Reference: RBD-3004
Brand: ST Microelectronics
STLINK-V3SET is a modular standalone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board.
Reference: RBD-1970
Brand: DFRobot
Version 2.0 More natural pronunciation Fewer pronunciation errors for polyphone characters No option of speakers
Reference: RBD-2770
Brand: Waveshare
ESP32-S3 Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope SensorSKU: 25098Part Number: ESP32-S3-Touch-LCD-1.28Brand: Waveshare
Reference: RBD-2831
Introducing a compatible Raspberry Pi Pico Clone, Made in China. Equipped with the authentic Raspberry Pi RP2040 microcontroller chip, this Pico offers comparable performance at a competitive price point. However, it's essential to note that while the microcontroller chip is genuine, the PCB itself is not manufactured by Raspberry Pi but rather in China....
Reference: RBD-0323
Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.
Reference: RBD-3476
The PIC Mini System Development Board featuring the Microchip PIC16F877A microcontroller is a versatile, beginner-friendly, and affordable development platform designed to accelerate embedded system learning and project development. Supporting both USB and 12V DC power inputs, this board offers exceptional flexibility and ease of use for engineers,...
Reference: RBD-2827
Brand: ST Microelectronics
Module with 32-bit microcontroller with ARM Cortex M4, 180 MHz,512 KB Flash, 128 KB SRAM. Nucleo is compatible with the mbed platform, has connectors for connecting the caps of the Arduino so-called Arduino Shield.
Reference: RBD-1602
Microcontroller: ESP8266EX Operating Voltage: 3.3V Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0) Analog Input Pins: 1 Flash Memory: 4MB On-Board Switching Power Supply: Input Voltage Range: 9V to 12V Output: 5V at 1A Max
Reference: RBD-0154
Microcontroller: ATmega32u4 Operating Voltage: 5V Input Voltage (Recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 20 PWM Channels: 7 Analog Input Channels: 12Made in China Compatible Version
Reference: RBD-2772
Used to test and develop Chengdu Ebyte E83-2G4M03S wireless module. E83-2G4M03S-TB has been pre-soldered to E83-2G4M03S. Please refer to the module manual for detailed usage. All IO ports of the E83-2G4M03S wireless module have been led out. The module is equipped with CH340X serial port chip, which can directly carry out serial communication development....
Reference: RBD-3117
Overview: The Milk-V Duo is an ultra-compact embedded development platform powered by the CV1800B chip. Designed for flexibility and high performance, it can run Linux and RTOS, making it an excellent choice for professionals, industrial ODMs, AIoT enthusiasts, DIY hobbyists, and creators. Despite its small size, this board offers powerful processing...
Reference: RBD-3578
The WeAct STM32G431CBU6 is a powerful and compact development board built around the STM32G431 series microcontroller from STMicroelectronics. Featuring the ARM Cortex-M4 core running at up to 170MHz, this board offers exceptional performance and a rich set of peripherals, making it a perfect platform for embedded systems learning, prototyping, and...
Reference: RBD-2012
Brand: Raspberry Pi Official
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
Reference: RBD-2679
STM32F103C8T6 ARM Development Board Module with Type-C Interface and Enhanced Memory Enhance your embedded system projects with the STM32F103C8T6 ARM development board module. Featuring a Type-C interface for easy connectivity, this module offers seamless one-click download capability. With an upgraded BOOT switch, you can easily perform upgrades without...
Reference: RBD-2393
Brand: Raspberry Pi Official
Enhanced Connectivity: Wi-Fi via Infineon CYW43439 High Performance: RP2040 microcontroller with dual-core Arm Cortex M0+ processor Flexible Power Options: from ~1.8 to 5.5V, ideal for batteries or USB power. Rich Interfaces: Includes 26 GPIO pins, 2x SPI, 2x I2C, 2x UART, ADC, and PWM channels. Easy Programming: Drag-and-drop via USB or Serial Wire...
Reference: RBD-2044
Model: ESP32-CAM-MB Color: Black Chipset: CH340G Connectivity Technology: USB Note: The camera module is not included with the board. Note: Module Variants can be different as our stock rotates.
Reference: RBD-3630
Brand: DFRobot
Tiny I/O expansion board for micro:bit, supports 3V/5V connections, compatible with DFRobot modules, sensors, and servo motors. Compact design prevents reverse connections
Reference: RBD-1549
Brand: NVIDIA
Micro-USB: 5V 2A USB C: 5V 3A. 128-core NVIDIA Maxwell GPU Quad-core ARM A57 2 GB 64-bit LPDDR4 Connectivity by Gigabit Ethernet (RJ45)
Reference: RBD-3590
The ESP32-ETH01 Serial to Ethernet Module is a compact and powerful development board designed around the ESP32-WROOM-32 SoC. It acts as a robust bridge between serial UART communication and Ethernet, making it the ideal solution for adding network capabilities to your embedded devices or industrial control systems. With its integrated TCP/IP stack, dual...
Reference: RBD-3261
The ESP8266 Witty Cloud ESP-12F WiFi Module is a powerful WiFi enabled processor in a compact package that incorporates an RGB LED, LDR light sensor and pushbutton for easy stand-alone operation.
Reference: RBD-3633
The BBC Micro Bit V2.21 is a compact, versatile single-board computer designed to inspire creativity and hands-on learning in coding, electronics, and robotics. At just half the size of a credit card, it’s packed with powerful features including motion sensing, Bluetooth communication, a 5x5 LED matrix, built-in speaker, microphone, and more.
Reference: RBD-3632
Brand: DFRobot
An intelligent camera module featuring advanced AI, voice interaction, and night vision capabilities. Ideal for IoT applications like surveillance and smart assistants.
Reference: RBD-3212
The STM32 Starter Kit B is a comprehensive development kit designed for beginners and professionals to explore the STM32 ecosystem. Equipped with an STM32F103C8T6 microcontroller, this kit combines a development board, an STM32Block expansion board, and a breadboard for hands-on learning. Featuring onboard input/output modules, sensors, and LED circuits,...
Reference: 0366
১ টি রাস্পবেরি পাই ৩ মডেল বি ১ টি কুলিং ফ্যান কেস রাস্পবেরি পাই এর হিট সিংক রাস্পবেরি পাই এর কমপ্যাটিবল পাওয়ার এডাপটার সুইচ সহ ট্রান্সসেন্ড অথবা স্যানডিস্ক ব্রান্ডের জেনুইন ১৬ জিবি অথবা ৩২ জিবি মেমরি কার্ড প্রি-ইনস্টলড অপারেটিং সিস্টেম সহ।
Reference: RBD-1140
Open-source single-board computer. Android 4.4. Ubuntu. Debian. Raspbian Image. AllWinner H3 SoC. 512GB DDR3 SDRAM.
Reference: RBD-3175
Brand: ST Microelectronics
The STM32F4DISCOVERY board is an advanced development platform designed to showcase the high-performance capabilities of the STM32F407 microcontroller with its 32-bit ARM Cortex-M4F core. Suitable for both beginners and experienced developers, it provides a complete solution for exploring and implementing powerful applications. The board comes equipped...
Reference: RBD-2376
Rockchip RK3588S 8-core 64-bit processor Quad-core A76 + quad-core A55 architecture ARM Mali-G610 GPU with 3D/2D image acceleration Built-in NPU with 6Tops computing power 4GB LPDDR4 RAM Up to 8K display processing capability
Reference: RBD-0350
100% Brand new and high quality STM32 Board Model: STM32F103C8T6. Core: ARM 32 Cortex-M3 CPU. Debug mode: SWD. 72MHz work frequency. 64K flash memory, 20K SRAM. RoboticsBD 2.0-3.6V power, I/O.
Reference: RBD-2367
ESP32-S3-WROOM-1-N16R8(16M Flash/8SRAM) Powerful ESP32-S3 chip for enhanced processing capabilities Dual Type-C USB ports for easy connectivity Built-in Wi-Fi and Bluetooth for seamless communication 16MB flash memory for ample storage space 8MB PSRAM for efficient multitasking Micropython support for easy programming Ideal for IoT projects, robotics, and...
Reference: RBD-3170
Brand: ST Microelectronics
STM32F411E-Disco Development Kit - Discovery Board with STM32F411VET6 Cortex-M4F Microcontroller The STM32F411E-Disco Discovery Kit is a comprehensive development platform featuring the STM32F411VET6 microcontroller. Powered by the advanced ARM Cortex-M4F core with a hardware floating-point unit, this kit provides developers with a robust tool to explore...
Reference: RBD-0673
Detecting range: 300~10000ppm Signal output indicator. Dual Signal output (analog output and TTL output). The TTL output signal is low level, allows us to connect with SCM directly. Analog output 0~5V voltage. Quick response and recovery. RoboticsBD
Reference: RBD-2263
Type: Hexagonal coupling. Material: brass. Inner diameter: 8 mm. Total length: 30 mm. Size of Hex Socket(Long Diagonal): 14mm Weight: 18.6gm
Reference: RBD-0749
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 85 mm Width : 38 mm The material of Wheel: High-strength plastic The material of Tyre: Rubber Color: Black Tyre + Blue Rim
Reference: RBD-0679
Sensitivity to Ammonia, Sulfide and Benzene steam Sensitive for benzene, alcohol, smoke Fast response and recovery Adjustable sensitivity. RoboticsBD Signal output indicator Output voltage boosts along with the concentration of the measured gases increases.
Reference: RBD-2802
Neodymium Magnet Size: Square (Cube) Actual Size - 7.92 x 7.92 x 7.92 mm Note: Magnet size may deviate by up to 5%. If you require precise dimensions, please contact our customer support for exact measurements.
Reference: RBD-3621
Tap into the power of the sun with this compact and efficient 12V 1.5W Mini Solar Panel. Designed with high-quality polycrystalline silicon, this solar panel is ideal for a variety of low-power applications including DIY projects, solar-powered models, portable lighting, and charging small DC batteries. With excellent conversion efficiency and good...
Reference: RBD-0441
Power supply voltage: DC5 ± 2V Sensitivity: 0.5V / (0.1mg / m3) The minimum detection level of particles: 0.8 m Clean air voltage: 0.9V typ. Low consumption current (Icc: MAX. 20 mA) The presence of dust can be detected by the photometry of only one pulse Enable to distinguish smoke from house dust RoboticsBD
Reference: RBD-2608
Connects your PMS5003 air quality sensor to standard 2.54mm headers Simplifies integration with Arduino, Raspberry Pi, and other microcontrollers No soldering or custom connections required Easy to use and ensures compatibility Ideal for air quality monitoring and environmental sensing projects
Reference: RBD-3074
Neodymium Magnet Grade N35 Shape Disc Actual Size - 5.95 x 2.54 mm Note: Magnet size may deviate by up to 5%. If you require precise dimensions, please contact our customer support for exact measurements.
Reference: RBD-2836
Operating Voltage: 3.5V-5V Supply Current: 15mA Optimal Sensing Distance: 3mm Designed with the reflected infrared sensor, indicator light. Built in a potentiometer for sensitivity control. On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L Signal detection sensitivity can adjust Reserve all the way more circuits (P3 voltage drawn)
Reference: RBD-3621
Tap into the power of the sun with this compact and efficient 12V 1.5W Mini Solar Panel. Designed with high-quality polycrystalline silicon, this solar panel is ideal for a variety of low-power applications including DIY projects, solar-powered models, portable lighting, and charging small DC batteries. With excellent conversion efficiency and good...
Reference: RBD-2856
Brand: DFRobot
The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. Solar Power Manager 5V is a small power and high-efficiency solar power management module designed for 5V solar panel. It features as MPPT...
Reference: RBD-1069
Wheel Outer Diameter: 44MM Wheel width: 18 mm Tire material: Rubber Color: Black & White Weight: 18 gm Coder Accuracy: 12 pulses per revolution Wheel weight: 19.4 gm.
Reference: RBD-2608
Connects your PMS5003 air quality sensor to standard 2.54mm headers Simplifies integration with Arduino, Raspberry Pi, and other microcontrollers No soldering or custom connections required Easy to use and ensures compatibility Ideal for air quality monitoring and environmental sensing projects
Reference: RBD-2930
The Mini Solar Panel 60*60mm with Wire for DIY Projects is ready to use without requiring a frame or special modifications. We have chosen to sell these Polycrystalline solar cells because they are Laser cut to the proper size and encapsulated in the special sun and weather-resistant materials which give them unique characteristics. RoboticsBD
Reference: RBD-0673
Detecting range: 300~10000ppm Signal output indicator. Dual Signal output (analog output and TTL output). The TTL output signal is low level, allows us to connect with SCM directly. Analog output 0~5V voltage. Quick response and recovery. RoboticsBD
The Mars S Smart Rover Control Board is a versatile, open-source microcontroller board designed for robotics and smart rover projects. Built around the reliable ATmega328P chip, this board supports both Arduino IDE and Mixly graphical programming, making it perfect for beginners, students, and developers alike.
