"The Future is Now" 3D প্রিন্টার এখন পাওয়া যাচ্ছে রোবোটিক্স বাংলাদেশে। 3D প্রিন্টার কিনুন, আপনার পছন্দের 3D ডিজাইন তৈরি করুন অথবা ইন্টারনেট থেকে ডাউনলোড করুন। প্রিন্ট দিন মুহূর্তেই। যেকোনো জিনিস যেকোনো সময়ে। খুব সহজেই ভিডিও দেখে 3D প্রিন্টার এসেমব্লি করতে পারবেন।
The Anycubic i3 Mega S is a solid, metal-framed 3D printer that comes mostly assembled. Assembly is easy and takes only a few minutes. It has a large build envelope. The Anycubic i3 Mega S also includes some nice advanced features
Tri-Gorilla is an integrated mainboard that is integrated with the mighty function of the Mega2560+ramps 1.4 on respect of both software and hardware and has more premium features, a rich all-in-one electronics solution. Supports Marlin firmware too. RoboticsBD
The device is capable of producing high-quality prints, thanks to the stable construction and fine layer resolution down to 0.05 mm. It supports multiple filament materials, including PLA, ABS, High Impact Polystyrene HIPS) and wood. RoboticsBD
Ultrabase :
- Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.
- Ultrabase integrated with heated bed: Super Flatness, Fast and uniform heating
- Durable: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400°C.
- Easy to clean: Ultrabase is easy to clean by alcohol/water. RoboticsBD
Features:
- Large build volume: 210 x 210 x 205 mm
- User-friendly 3.5-inch touch-screen interface
- Can be assembled in just a few minutes
- Full Rigid Solid metal frame construction and superior stability
- High quality, accurate printing with layer resolution down to 50 microns
- Ultrabase
- Smart manual leveling
- Filament outage detection with an automatic pause when filament runs out and ability to resume after re-load
- Auto Resume Print from Power Outage
- Trigorilla Mainboard
Technical specifications:
- Printing Technology FDM (Fused Deposition Modeling)
- Layer Resolution 0.05-0.3 mm
- Positioning Accuracy X/Y 0.0125mm Z 0.002mm
- Supported Print Materials PLA, ABS, HIPS, Wood
- Print Speed 20~100mm/s(recommended speed 60%)
- Travel Speed 150mm/s
- Nozzle Diameter 0.4 mm/1.75 mm
- Extruder Quantity Single
- Build Size 210 x 210 x 205mm
- Working Voltage 12V DC
- Electrical 110-220V AC, 50/60Hz
- Operational Extruder Temperature Max 260ºC
- Ambient Operating Temperature 8ºC - 40ºC
- Operational Print Bed Temperature Max 110ºC
- Input Formats .STL, .OBJ, .DAE, .AMF
- Slicer Software Cura
- Cura Output Formats GCode
- Connectivity SD Card, USB Port (expert users only)
- Printer Dimensions 405mm x 410mm x453mm
- Package Weight 16.5kg
| General Specification |
| Modeling Technology |
FDM |
| Recommended Power Supply |
Input:AC 115/230 V
Output: DC 24 V |
| Maximum Power (W) |
270 |
| Operating System |
MAC/WindowsXP/7/8/10 |
| Software |
Simplify3d/Cura |
| Filament Diameter (mm) |
1.75 |
| Print Precision(mm) |
±0.1 |
| Hotbed Temperature(°C) |
≤100 |
| Printing Size(mm) |
210x210x205 |
| Length (mm) |
405 |
| Width (mm) |
410 |
| Height (mm) |
453 |
| Weight (gm) |
16000 |
| Shipment Weight |
16.00 kg |
| Shipment Dimensions |
50 × 40 × 40 cm |
Documentation:
- Anycubic I3 Mega S Manual
- Driver for Windows OS
- Driver for Mac OS
- Firmware Update
Package Includes:
1 x Anycubic I3 Mega S 3D Printer
