DRV8825 Stepper Motor Driver Module Robotics Bangladesh
  • DRV8825 Stepper Motor Driver Module Robotics Bangladesh
  • DRV8825 Stepper Motor Driver Module Robotics Bangladesh
  • DRV8825 Stepper Motor Driver Module Robotics Bangladesh

DRV8825 Stepper Motor Driver Module

RBD-0434
  • Supply Voltage: 8.2 – 42 VDC.
  • Current Capacity : 2.2A max(24V).
  • Continuous current per phase: 1.5 A.
  • Minimum Logic voltage: 2.5V.
  • Maximum Logic Voltage: 5V.
  • Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
  • Dimensions : 15 x 20 mm.
  • Weight: 4 gm. RoboticsBD
BDT 230
rating Read the 6 reviews
Average rating: 5/5 - Number of reviews: 6
Quantity
In-Stock

14 people have purchased this item in last 12 months
90 people recently added this item to the cart
59 items in stock
notifications Notify Me
  • Store Pickup Available! Store Pickup Available!
  • Free Ship Over 5000 BDT Free Ship Over 5000 BDT
  • Quality Product Quality Product
  • No Warranty No Warranty
  • No Replacement No Replacement

The DRV8825 Stepper Motor Driver with Aluminum Heat Sink is a breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver.

The module has a pinout and interface that are nearly identical to those of the A498 Stepper Motor Driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.

The DRV8825 features adjustable current limiting, overcurrent, and overtemperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Features :

  1. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
  2. Simple step and direction control interface
  3. Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
  4. Adjustable current control lets you set the maximum current output with a potentiometer. Hence lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
  5. Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
  6. 45 V maximum supply voltage
  7. Built-in regulator (no external logic voltage supply needed) RoboticsBD
  8. Can interface directly with 3.3 V and 5 V systems
  9. Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
  10. Short-to-ground and shorted-load protection
  11. 4-layer, 2 oz copper PCB for improved heat dissipation. RoboticsBD
  12. Exposed solder able ground pad below the driver IC on the bottom of the PCB

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

General Specification
Input Supply Voltage (VDC) 8.2 ~ 42
Current Handling Capacity (A) 2.2
Continuous Current (A) 1.5 (per phase)
Logic Input (V) 2.5 ~ 5
Length (mm) 15
Width (mm) 20
Weight (gm) 4
Shipment Weight 0.005 kg
Shipment Dimensions 4 × 4 × 4 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Documentation :

  1. Datasheet
  2. Official Product Link
  3. DRV8834 Low-Voltage Stepper Motor Driver Carrier
  4. Stepper motor Pololu
  5. A4988 Stepper Motor Driver Carrier

Package Includes :

1 x DRV8825 Stepper Motor Driver Modul.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

What is the price of DRV8825 Stepper Motor Driver Module in Bangladesh?

The latest price of DRV8825 Stepper Motor Driver Module in Bangladesh is BDT 230 You can buy the DRV8825 Stepper Motor Driver Module at best price from our RoboticsBD or visit RoboticsBD Office.

Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product.

Product Images are shown for illustrative purposes only and may differ from the actual product.
Product Details
RBD-0434
59 Items
Cost effective stepper driver
rating
10/02/2025
Ahmed Omar
I was able to achieve multi-stepping very easily and the driver had good heat handling capability when paired with an exhaust fan.
drv8825
rating
03/12/2023
Ismat Jahan Nabila
liked it.
Driver
rating
10/10/2023
Md.Momin
Didn’t test, hope work properly.
Good
rating
06/08/2023
Md Sadi Mobassir
no problem
Good
rating
26/04/2020
Avijit
Good
Good
rating
06/03/2020
Faisal
Good
You might also like
A4988 StepStick Stepper Motor Driver Module Robotics Bangladesh Quick view

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.

Price BDT 180
More
In-Stock
30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino Robotics Bangladesh Quick view

Reference: RBD-0557

30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino

Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD

Price BDT 999
More
In-Stock
5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3 Robotics Bangladesh Quick view

Reference: RBD-0565

5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3

Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. USB power supply and peripherals power phase are separate to protect computer security. All the signals are to-isolate which can protect your computer security. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc. Wide input voltage range: 12-24V, and with...

Price BDT 3,500
More
In-Stock
EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino Robotics Bangladesh Quick view

Reference: RBD-0662

EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino

Power supply: 7V to 30V. The higher the voltage, the higher the torque at high speeds. Adjustable current control from 150mA/phase to 750mA/phase. Logic voltage: 5V or 3.3V. A3967 microstepping driver. RoboticsBD

Price BDT 350
More
In-Stock
Arduino CNC Shield V3 Robotics Bangladesh Quick view

Reference: RBD-1065

Arduino CNC Shield V3

Latest Arduino CNC Shield Version 3.10 GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) Coolant enable Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ) Compact design. 4-Axis support (X, Y, Z, A-Can duplicate...

Price BDT 220
More
In-Stock

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver Robotics Bangladesh Quick view

Reference: RBD-1379

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor  TB6600 Stepper Motor Driver CNC and 3D Printer

Price BDT 7,420
More
In-Stock
Nema 17 Stepper Motor 17HS4401S Robotics Bangladesh Quick view

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.

Price BDT 1,290
More
Last items in stock
23 other products in the same category:
A4988 StepStick Stepper Motor Driver Module Robotics Bangladesh Quick view

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.

Price BDT 180
More
In-Stock
L298P Motor Driver Shield for Arduino Robotics Bangladesh Quick view

Reference: RBD-2145

L298P Motor Driver Shield for Arduino

L298P based Arduino motor driver shield Onboard Buzzer (D4). Onboard Bluetooth interface, you can directly plug, no wiring required. Six Analog interface. Forward, Backward steering indicators

Price BDT 1,250
More
In-Stock
SSC-32 32Ch Servo Controller Lynxmotion Compatible Robotics Bangladesh Quick view

Reference: RBD-0703

SSC-32 32Ch Servo Controller Lynxmotion Compatible

Controls up to 32 servo motors Comes preassembled USB interface (cable included), Xbee socket, and TTL serial Bidirectional communication with Query commands Large capacitors to prevent brownouts

Price BDT 3,400
More
In-Stock
Big Easy Driver - Stepper Motor Driver Robotics Bangladesh Quick view

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module

Price BDT 699
More
In-Stock
16 Channel 12 bit PWM / Servo Driver I2C interface PCA9685 Robotics Bangladesh Quick view

Reference: RBD-0289

16 Channel 12 bit PWM / Servo Driver I2C interface PCA9685

Adjustable frequency PWM up to about 1.6 KHz 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate Configurable push-pull or an open-drain output The output enable pin to quickly disable all the outputs Terminal block for power input Reverse polarity protection on the terminal block input Green power-good LED

Price BDT 680
More
Out of Stock
Big Easy Driver - Stepper Motor Driver Robotics Bangladesh Quick view

Reference: RBD-0267

Big Easy Driver - Stepper Motor Driver

Bi-polar Microstepping Driver 2A/Phase Max 1.4-1.7A/Phase w/o Heatsink Max Motor Drive Voltage: 30V On-board 5V/3.3V Regulation Low RDS(ON) outputs Automatic current decay mode detection/selection Mixed and Slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic...

Price BDT 1,600
More
Sold-out
EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino Robotics Bangladesh Quick view

Reference: RBD-0662

EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino

Power supply: 7V to 30V. The higher the voltage, the higher the torque at high speeds. Adjustable current control from 150mA/phase to 750mA/phase. Logic voltage: 5V or 3.3V. A3967 microstepping driver. RoboticsBD

Price BDT 350
More
In-Stock
Torobot 32 Channel USB UART Servo Motor Controller Robotics Bangladesh Quick view

Reference: RBD-0306

Torobot 32 Channel USB UART Servo Motor Controller

Baud rate (USB): 115200 Baud rate (bluetooth, UART): 9600 Storage Flash capacity: 16M Mode to choose: 4 types Simultaneous controlling servo number: 32 channel Max action groups: 256 groups Communication agreement: UART Cross platform operation, can support WindowsXP, WindowsVisit, Windows7, Windows8, Windows10, Linux,FreeBsd, MAC OS, Android

Price BDT 4,400
More
In-Stock
Motor Driver - Dual TB6612FNG (1A) Robotics Bangladesh Quick view

Reference: RBD-0684

Motor Driver - Dual TB6612FNG (1A)

CW/CCW/short break/stop motor control modes Built-in thermal shutdown circuit and a low voltage detecting circuit Standby control to save power CW/CCW/short brake/stop motor control modes Operating Voltage(VDC): 15 Peak Current (A): 3.2 Continuous Current (A): 1.2 No. of Channels: 1

Price BDT 230
More
In-Stock
Dual Channel Motor Driver Shield For Arduino Robotics Bangladesh Quick view

Reference: RBD-1635

Dual Channel Motor Driver Shield For Arduino

Logic control, 5V from Arduino main board Polarity protection for External motor power input 2 fast test buttons for each motor channel Motor Driven Voltage：6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source) Up to 2A current each channel Pin 4, 5,6,7 are used to drive two DC motor Support PWM speed control Support  advance speed control

Price BDT 1,399
More
In-Stock
- BDT 140 Reduced price Motor Driver 43A BTS7960 Robotics Bangladesh Quick view

Reference: RBD-0742

Motor Driver 43A BTS7960

Input voltage(V): 6 – 27. Maximum current(A): 43. Input level(V): 3.3 – 5. Duty cycle: 0 – 100%. Path resistance: 16 mΩ at 25°C. Low quiescent current: 7 µA at 25°C.

Price BDT 550 Regular price BDT 690
More
In-Stock
L293D Shield for NodeMCU V2 Robotics Bangladesh Quick view

Reference: RBD-1810

L293D Shield for NodeMCU V2

Motor Power Range: 4.5V ~ 36V Control supply range: 4.5V ~ 9V Logical operating current Iss: ≤60mA Driving part of the work current Io: ≤1.2A Maximum power dissipation: 4W (T = 90 ℃) Operating temperature : -25 ℃ ~ + 125 ℃ Drive Type: Dual high-power H-bridge driver

Price BDT 185
More
In-Stock
TB6560 Single Axis 3A Stepper Motor Driver Board Robotics Bangladesh Quick view

Reference: RBD-2158

TB6560 Single Axis 3A Stepper Motor Driver Board

Driver Chip: TB6560AHQ Operating Voltage: 10-35V Nominal Voltage: 24V With the large heat sink to ensure good heat dissipation 6N137 high-speed OptoCoupler, to ensure a high speed without step out.

Price BDT 780
More
In-Stock
DC-5V-35V 5A PWM Motor Speed Controller Robotics Bangladesh Quick view

Reference: RBD-1724

DC-5V-35V 5A PWM Motor Speed Controller

Operating voltage: DC4.5V-35V Output current: 0-5A Output power: 90W (max) PWM duty cycle: 1% -100%. PWM frequency:20khz Wide voltage DC motor speed controller.

Price BDT 220
More
In-Stock

Servo Motor Controller Driver Board 16 Channels High Accuracy MCU Software Robotics Bangladesh Quick view

Reference: RBD-2209

Servo Motor Controller Driver Board 16 Channels High Accuracy MCU Software

16 channels PWM servo motor driver controller board module Supports USB interface, TTL serial port, and Bluetooth communication Bluetooth communication can connect to Android phone or PC software Master chip STM32 series, frequency 48MHz Size 43.5x36mmx12mm, operating voltage 5V USB, TTL3.3V, servo motor supply 5-7.2V Channel 16, PWM accuracy 0.1ms

Price BDT 2,490
More
In-Stock
DC 5V Stepper Motor with ULN2003 Driver Board 28BYJ-48 Robotics Bangladesh Quick view

Reference: RBD-0573

DC 5V Stepper Motor with ULN2003 Driver Board 28BYJ-48

Rated voltage: 5V DC Reduction Ratio: 64:1 Step Angle: 5.625° /64 Frequency: 100Hz Self-positioning Torque: >34.3mN.m Friction torque: 600-1200 gf.cm Pull in torque: 300 gf.cm

Price BDT 165
More
In-Stock
Motor Shield L293D Robotics Bangladesh Quick view

Reference: RBD-0015

Motor Shield L293D

2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%...

Price BDT 210
More
In-Stock
Ardumoto Shield L298P Motor Driver Robotics Bangladesh Quick view

Reference: RBD-0392

Ardumoto Shield L298P Motor Driver

L298P based Arduino motor driver shield Forward, Backward steering indicators Can Drive 2 DC Motors Up to 2A of Maximum Current. RoboticsBD

Price BDT 699
More
In-Stock
L293D Motor Driver Module Robotics Bangladesh Quick view

Reference: RBD-1912

L293D Motor Driver Module

New L293D motor shield, the input voltage DC4.5-25V 600mA output current capability per channel 1.2A peak output current(non-repetitive) per channel Enable facility Overtemperature protection Logical “0” input voltage up to 1.5V(High noise immunity)

Price BDT 215
More
In-Stock
L297 Stepper Motor Controller IC Robotics Bangladesh Quick view

Reference: RBD-1606

L297 Stepper Motor Controller IC

Supply Voltage Range: 4.75V to 7V Driver Case Style: DIP No. of Pins: 20 Operating Temperature Range: -40°C to +150°C

Price BDT 96
More
In-Stock
30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino Robotics Bangladesh Quick view

Reference: RBD-0557

30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino

Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD

Price BDT 999
More
In-Stock

Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A Robotics Bangladesh Quick view

Reference: RBD-0377

Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A

Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD

Price BDT 5,000
More
In-Stock
L298N H-Bridge Dual Motor Driver, Stepper Motor Driver Robotics Bangladesh Quick view

Reference: RBD-0376

L298N H-Bridge Dual Motor Driver, Stepper Motor Driver

Current Sense for each motor. RoboticsBD Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes

Price BDT 195
More
In Stock
Customers who bought this product also bought:
EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino Robotics Bangladesh Quick view

Reference: RBD-0662

EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino

Power supply: 7V to 30V. The higher the voltage, the higher the torque at high speeds. Adjustable current control from 150mA/phase to 750mA/phase. Logic voltage: 5V or 3.3V. A3967 microstepping driver. RoboticsBD

Price BDT 350
More
In-Stock
Pack DC3-12V N20 Gear Motor & Mount Bracket & 43mm Wheel Robotics Bangladesh Quick view

Reference: RBD-1114

DC3-12V N20 Gear Motor & Mount Bracket & 43mm Wheel

N20 Micro Gear 12V 100RPM DC Motor (High Torque) Mounting Bracket for N20 Micro Gear motors 3PI miniQ Car wheel Tyre 44mm N20 DC Gear Motor Wheel

Price BDT 480
More
In-Stock
Potentiometer Knob Rotary Switch Cap Robotics Bangladesh Quick view

Reference: RBD-1891

Potentiometer Knob Rotary Switch Cap

Inner Diameter(ID): 6 mm Outer Diameter(D) : 15 mm Material: Bakelite Color: Random Weight:5.3 gm

Price BDT 15
More
In-Stock
4 Pin JST-XH Male Straight Connector 2. Quick view

Reference: RBD-2021

4 Pin JST-XH Male Straight Connector 2.54mm Pitch

Current Rating: 3A Voltage Rating: 250V Connector Type: Header JST-XH 4 Pin Connector

Price BDT 9
More
In-Stock
Nema 17 Stepper Motor 17HS4401S Robotics Bangladesh Quick view

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.

Price BDT 1,290
More
Last items in stock
Ball Caster 3PI N20 Robotics Bangladesh Quick view

Reference: RBD-1070

Ball Caster 3PI N20

Dimensions: 22 x 15 mm (Diameter x Height) Weight: 10 gm Body Case Material: Plastic Ball Material: 304 Stainless Steel Application: for MiniQ robot

Price BDT 80
More
Out-of-Stock
Blue Led 5mm (pack of 5) Robotics Bangladesh Quick view

Reference: RBD-1300

Blue Led 5mm (pack of 5)

Size: 5mm Color: BLUE Head Shape: Round Lens Appearance: Transparent

Price BDT 5
More
In-Stock
Arduino CNC Shield V3 Robotics Bangladesh Quick view

Reference: RBD-1065

Arduino CNC Shield V3

Latest Arduino CNC Shield Version 3.10 GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) Coolant enable Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ) Compact design. 4-Axis support (X, Y, Z, A-Can duplicate...

Price BDT 220
More
In-Stock

Our last Google reviews

 
View all reviews

  • Frequently purchased together

    Arduino CNC Shield V3 Robotics Bangladesh Quick view

    Reference: RBD-1065

    Arduino CNC Shield V3

    Latest Arduino CNC Shield Version 3.10 GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) Coolant enable Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ) Compact design. 4-Axis support (X, Y, Z, A-Can duplicate...

    Price BDT 220
    More
    In-Stock
    Nema 17 Stepper Motor 17HS4401S Robotics Bangladesh Quick view

    Reference: RBD-1390

    Nema 17 Stepper Motor 17HS4401S

    Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.

    Price BDT 1,290
    More
    Last items in stock
    On sale! Arduino Uno R3 Robotics Bangladesh Quick view

    Reference: RBD-0094

    Arduino Uno R3

    The Arduino Uno R3 High-Quality Edition Arduino UNO in Bangladesh Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...

    Price BDT 1,100
    More
    In-Stock
    Arduino Mega 2560 R3 Robotics Bangladesh Quick view

    Reference: RBD-0009

    Arduino Mega 2560 R3

    54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.

    Price BDT 1,995
    More
    Sold-out
    Arduino Nano Robotics Bangladesh Quick view

    Reference: RBD-0032

    Arduino Nano

    USB Driver: CH340 Operating Voltage (logic level): 5V With Mini USB 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please select...

    Price BDT 730
    More
    In-Stock
    A4988 StepStick Stepper Motor Driver Module Robotics Bangladesh Quick view

    Reference: RBD-0435

    A4988 StepStick Stepper Motor Driver Module

    Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.

    Price BDT 180
    More
    In-Stock
    Jumper Wire 40 Pcs Set 20cm Robotics Bangladesh Quick view

    Reference: 0031

    Jumper Wire 40 Pcs Set 20cm

    3 Types Available (Please select from option) 1. Male to Male  2. Male to Female 3. Female-Female

    Price BDT 95
    More
    In-Stock
    Nema 23 23HS5628 Stepper Motor Robotics Bangladesh Quick view

    Reference: RBD-0817

    Nema 23 23HS5628 Stepper Motor

    Step Angle Step Angle: 1.8 ° Current: 2.8 A/Phase Holding Torque: 10.1 N-cm Detent torque: 3.6 N.cm (Maximum) Lead Wires: 4 Shaft diameter: 8.00 mm

    Price BDT 2,349
    More
    In-Stock

  • Products from the same category

    Motor Shield L293D Robotics Bangladesh Quick view

    Reference: RBD-0015

    Motor Shield L293D

    2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%...

    Price BDT 210
    More
    In-Stock
    Big Easy Driver - Stepper Motor Driver Robotics Bangladesh Quick view

    Reference: RBD-0267

    Big Easy Driver - Stepper Motor Driver

    Bi-polar Microstepping Driver 2A/Phase Max 1.4-1.7A/Phase w/o Heatsink Max Motor Drive Voltage: 30V On-board 5V/3.3V Regulation Low RDS(ON) outputs Automatic current decay mode detection/selection Mixed and Slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic...

    Price BDT 1,600
    More
    Sold-out
    L298N H-Bridge Dual Motor Driver, Stepper Motor Driver Robotics Bangladesh Quick view

    Reference: RBD-0376

    L298N H-Bridge Dual Motor Driver, Stepper Motor Driver

    Current Sense for each motor. RoboticsBD Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes

    Price BDT 195
    More
    In Stock
    16 Channel 12 bit PWM / Servo Driver I2C interface PCA9685 Robotics Bangladesh Quick view

    Reference: RBD-0289

    16 Channel 12 bit PWM / Servo Driver I2C interface PCA9685

    Adjustable frequency PWM up to about 1.6 KHz 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate Configurable push-pull or an open-drain output The output enable pin to quickly disable all the outputs Terminal block for power input Reverse polarity protection on the terminal block input Green power-good LED

    Price BDT 680
    More
    Out of Stock
    Torobot 32 Channel USB UART Servo Motor Controller Robotics Bangladesh Quick view

    Reference: RBD-0306

    Torobot 32 Channel USB UART Servo Motor Controller

    Baud rate (USB): 115200 Baud rate (bluetooth, UART): 9600 Storage Flash capacity: 16M Mode to choose: 4 types Simultaneous controlling servo number: 32 channel Max action groups: 256 groups Communication agreement: UART Cross platform operation, can support WindowsXP, WindowsVisit, Windows7, Windows8, Windows10, Linux,FreeBsd, MAC OS, Android

    Price BDT 4,400
    More
    In-Stock

    Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A Robotics Bangladesh Quick view

    Reference: RBD-0377

    Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A

    Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD

    Price BDT 5,000
    More
    In-Stock
    Ardumoto Shield L298P Motor Driver Robotics Bangladesh Quick view

    Reference: RBD-0392

    Ardumoto Shield L298P Motor Driver

    L298P based Arduino motor driver shield Forward, Backward steering indicators Can Drive 2 DC Motors Up to 2A of Maximum Current. RoboticsBD

    Price BDT 699
    More
    In-Stock
    A4988 StepStick Stepper Motor Driver Module Robotics Bangladesh Quick view

    Reference: RBD-0435

    A4988 StepStick Stepper Motor Driver Module

    Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.

    Price BDT 180
    More
    In-Stock

  • New products

    No products available