Digispark Pro - ATtiny167 with Micro USB Robotics Bangladesh
  • Digispark Pro - ATtiny167 with Micro USB Robotics Bangladesh
  • Digispark Pro - ATtiny167 with Micro USB Robotics Bangladesh

Digispark Pro - ATtiny167 with Micro USB

RBD-1809
  • Digispark Pro 
  • ATtiny167 
  • Micro USB
  • 16MHz
BDT 690
rating Read the review
Average rating: 5/5 - Number of reviews: 1
Quantity
In-Stock

2 people have purchased this item in last 12 months
18 people recently added this item to the cart
27 items in stock
notifications Notify Me
  • Store Pickup Available! Store Pickup Available!
  • Free Ship Over 5000 BDT Free Ship Over 5000 BDT
  • Quality Product Quality Product
  • No Warranty No Warranty
  • No Replacement No Replacement

A very small Arduino with USB that is very suitable for smaller applications! 

The nice thing is that the ATtiny167 can be programmed without needing another Arduino or a programmer. This is because USB software runs on the ATtiny167  itself.

This version has more storage, is faster (16MHz instead of 8MHz) and has more pins compared to the normal Digispark with ATtiny85 chip.

A few headers are included that can be soldered onto the board. Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Note: This Digispark Pro is not original from DigiStump, but it is the same as the original version.

Features:

  1. Smaller, suitable for small applications
  2. 16MHz
  3. More pins than standard Digispark ATTiny85 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

General Specification
Chip ATTiny167
Dimensions 26.7mm x 18.3mm x 4mm
Shipment Weight 0.005 kg
Shipment Dimensions 3 × 3 × 3 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Documentation:

Upload manual with the Arduino IDE:

For the correct driver, install the "Digistump.Drivers.zip" from this link. Unzip the file before installing the drivers (with "Install Drivers.exe"). If this doesn't work, try "DPinst64.exe" or "DPinst.exe".

Check out this link for a detailed installation guide that also describes how to add the Digispark board to the board manager. 

  1. Wiki page
  2. Schematics
  3. Eagle Files
  4. Download Page

Here's a brief explanation on how to upload:
  1. Connect the DigiSpark Pro to the PC/laptop.
  2. Enter a code or use an example from the installation guide above.
  3. Select the right board: Tools -> Board -> "Digispark (Default - 16mhz)"
  4. Note: It is not necessary to select a COM-port (any COM-port will do).
  5. Upload the code. Wait for about 3 seconds. Remove the USB-cable from the DigiSpark. Reconnect the cable after about 3 seconds. 
  6. The code should be uploaded within approximately 10 seconds (depending on the selected upload speed). 

Package Includes:

1 x Digispark Pro - ATtiny167 with Micro USB.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

What is the price of Digispark Pro - ATtiny167 with Micro USB in Bangladesh?

The latest price of Digispark Pro - ATtiny167 with Micro USB in Bangladesh is BDT 690 You can buy the Digispark Pro - ATtiny167 with Micro USB at best price from our RoboticsBD or visit RoboticsBD Office.

Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product.

Product Images are shown for illustrative purposes only and may differ from the actual product.
Product Details
RBD-1809
27 Items
Good Product
rating
23/10/2024
Mominul Islam Hemal
My favourite arduino. Recieved Good Product.
You might also like
Arduino Nano Robotics Bangladesh Quick view

Reference: RBD-0032

Arduino Nano

USB Driver: CH340 Operating Voltage (logic level): 5V With Mini USB 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please select...

Price BDT 730
More
In-Stock
Arduino Pro Mini 328 5V/16Mhz Robotics Bangladesh Quick view

Reference: RBD-0155

Arduino Pro Mini 328 5V/16Mhz

Microcontroller: ATmega328 Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Support serial download.

Price BDT 680
More
In-Stock
Digispark Kickstarter ATTINY85 Arduino General Micro USB Development Board Robotics Bangladesh Quick view

Reference: RBD-0349

Digispark Kickstarter ATTINY85 Arduino General Micro USB Development Board

Support for the Arduino IDE 1.0 + (OSX/Windows/Linux). Power via USB or External Source or 7-16 v to 5 v (automatic selection).RoboticsBD The Onboard, 150 ma 5 v Regulator. Built-in USB and serial were debugging). 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming...

Price BDT 390
More
In-Stock
On sale! FTDI USB to TTL Serial Converter Adapter FT232RL Robotics Bangladesh Quick view

Reference: RBD-0658

FTDI USB to TTL Serial Converter Adapter FT232RL

Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini Original FTDI FT232 chip, stable performance USB power has current protection, using 500MA self-restore fuse RXD/TXD transceiver communication indicator With power, sending, receiving indicator, working status LED indicators Mini USB Port Connection Support 3.3V, 5V...

Price BDT 359
More
In-Stock
Arduino Pro Micro 5V/16MHz Robotics Bangladesh Quick view

Reference: RBD-0838

Arduino Pro Micro 5V/16MHz

ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD

Price BDT 870
More
In-Stock
Arduino Nano R3 Robotics Bangladesh Quick view

Reference: RBD-0926

Arduino Nano R3

USB Driver: FT232 Manufacturer: Gravitech Operating Voltage (logic level): 5V 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please...

Price BDT 850
More
In-Stock
Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU Robotics Bangladesh Quick view

Reference: RBD-1214

Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU

The board is compatible with Mega 2560.  excellent solution for developing projects based on ATmega2560. The board can be powered directly through the Micro USB connector The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.

Price BDT 1,650
More
In-Stock
Arduino Pro Mini 328 5V/16Mhz Robotics Bangladesh Quick view

Reference: RBD-1523

Arduino Pro Mini 328 5V/16Mhz

Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.

Price BDT 620
More
Sold-out
CP2102 Module USB to TTL Serial UART Converter Robotics Bangladesh Quick view

Reference: RBD-1770

CP2102 Module USB to TTL Serial UART Converter

Brand new and high quality Included USB transceiver, without external circuit device With 3.3V and 5V dual power output With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status Meets the USB2.0 specification requirements With self-recovery fuse. In the event of the accidental short circuit, it can...

Price BDT 330
More
In-Stock
30 other products in the same category:
Arduino Nano R3 Robotics Bangladesh Quick view

Reference: RBD-0926

Arduino Nano R3

USB Driver: FT232 Manufacturer: Gravitech Operating Voltage (logic level): 5V 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please...

Price BDT 850
More
In-Stock
LilyPad SMD LED Yellow Color Robotics Bangladesh Quick view

Reference: RBD-2242

LilyPad SMD LED Yellow Color

Wearable e-textile technology.  Designed with large sew tabs LED Yellow Color

Price BDT 18
More
In-Stock
Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU Robotics Bangladesh Quick view

Reference: RBD-1214

Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU

The board is compatible with Mega 2560.  excellent solution for developing projects based on ATmega2560. The board can be powered directly through the Micro USB connector The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.

Price BDT 1,650
More
In-Stock
ESP-32S ESP-WROOM-32 Development Board 38P NodeMCU Robotics Bangladesh Quick view

Reference: RBD-1820

ESP-32S ESP-WROOM-32 Development Board 38P NodeMCU

38 Pin version 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN Ultra-Low power consumption works perfectly with the IDE A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and instead use the...

Price BDT 880
More
In-Stock
WeMos D1 CH340 WiFi Development Board ESP8266 ESP-12F Robotics Bangladesh Quick view

Reference: RBD-1602

WeMos D1 CH340 WiFi Development Board ESP8266 ESP-12F

Microcontroller: ESP8266EX Operating Voltage: 3.3V Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0) Analog Input Pins: 1 Flash Memory: 4MB On-Board Switching Power Supply: Input Voltage Range: 9V to 12V Output: 5V at 1A Max

Price BDT 520
More
In-Stock
WeMos D1 R32 Mini ESP32 WIFI Bluetooth Development Board Robotics Bangladesh Quick view

Reference: RBD-2164

WeMos D1 R32 Mini ESP32 WIFI Bluetooth Development Board

WeMos D1 R32 Mini ESP32 WIFI Bluetooth Development Board CH340 chip for compatibility with Arduino UNO R3 Supports WIFI and Bluetooth connectivity Comes with a Type-B/Micro USB adapter

Price BDT 650
More
In-Stock
ESP32-CAM WiFi + Bluetooth Camera Module Development Board ESP32 With Camera Module OV2640 Robotics Bangladesh Quick view

Reference: RBD-1407

ESP32-CAM WiFi + Bluetooth Camera Module Development Board ESP32 With Camera Module OV2640

Flash LED off: 180mA @ 5V. Flash LED on to maximum brightness: 310mA @ 5V. Deep-sleep: 6mA @ 5V min. Modem-sleep: 20mA @ 5V min. Light-sleep: 6.7mA @ 5V min. Programmer: ESP32-CAM-MB MICRO USB Download Module The ESP32 CAM does not come pre-assembled with the camera. You'll need to connect the camera ribbon cable to the board, a task which can be...

Price BDT 848
More
In-Stock
1 Meter Mini USB Cable for Arduino Nano Robotics Bangladesh Quick view

Reference: RBD-2162

1 Meter Mini USB Cable for Arduino Nano

USB Type: Type-A to Mini-B Length: 1 meter/ 3.2 Feet Exclusively designed for Arduino boards.  Compatible with Arduino Nano Larger Cable

Price BDT 195
More
In-Stock

Nextion NX8048T050 - 5.0" LCD TFT HMI Touch Display Robotics Bangladesh Quick view

Reference: RBD-1218

Nextion NX8048T050 - 5.0" LCD TFT HMI Touch Display

Model No.:NX8048T050 Display Type:011R(R:Resitive Touchscreen) Operating Voltage (VDC):4.75 ~ 7 Max. Operating Current (mA):410 Touch Type: Resistive Colors:65K (65536)

Price BDT 8,250
More
In-Stock
1 Meter Micro USB Cable for Arduino, Node MCU and Flight Controllers Robotics Bangladesh Quick view

Reference: RBD-2160

1 Meter Micro USB Cable for Arduino, Node MCU and Flight Controllers

Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.

Price BDT 195
More
In-Stock
Arduino NANO I/O Extension Shield Robotics Bangladesh Quick view

Reference: RBD-0987

Arduino NANO I/O Extension Shield

Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments.

Price BDT 350
More
In-Stock
LilyPad Button Board Robotics Bangladesh Quick view

Reference: RBD-2243

LilyPad Button Board

Wearable e-textile technology.  Designed with large sew tabs Button Board

Price BDT 30
More
In-Stock
NodeMCU Mega WiFi R3 Atmega2560 ESP8266 32Mb Memory Board Robotics Bangladesh Quick view

Reference: RBD-2138

NodeMCU Mega WiFi R3 Atmega2560 ESP8266 32Mb Memory Board

Arduino compatibility Full integration USB-TTL converter 32 Mb flash memory Dual microcontrollersA high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and instead use the recommended cable available here:...

Price BDT 1,890
More
In-Stock
WeMos D1 mini Pro – ESP8266 based WiFi Module 16MB Robotics Bangladesh Quick view

Reference: RBD-1812

WeMos D1 mini Pro – ESP8266 based WiFi Module 16MB

11 digital input/output pins Interrupt/PWM/I2C/one-wire 1 analog input(3.2V max input) 16M bytes(128M bit) Flash External antenna connector Built-in ceramic antenna New CP2104 USB-TO-UART IC

Price BDT 440
More
In-Stock
Arduino Micro R3 Robotics Bangladesh Quick view

Reference: RBD-2126

Arduino Micro R3

Manufacturer: China Support TWI and SPI communication Input voltage (recommended) range from 7V to 12V Input Voltage (limit) range from 6V to 20V 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs) Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM

Price BDT 1,390
More
In-Stock

Altera Cyclone IV EP4CE6 FPGA Development Board NIOSII EP4CE PCB and USB Blaster Jtag AS Programmer Robotics Bangladesh Quick view

Reference: RBD-1827

Altera Cyclone IV EP4CE6 FPGA Development Board NIOSII EP4CE PCB and USB Blaster Jtag AS Programmer

Altera Cyclone IV EP4CE6 FPGA Development Board NIOSII EP4CE PCB  USB Blaster Jtag AS Programmer

Price BDT 11,225
More
In-Stock
ATmega328P-PU PDIP-28 Microcontroller Robotics Bangladesh Quick view

Reference: RBD-1215

ATmega328P-PU PDIP-28 Microcontroller

131 powerful instructions – Most Single Clock Cycle Execution 32 x 8 general purpose working registers Fully static operation Up to 20MIPS throughput at 20MHz On-chip 2-cycle multiplier Write/erase cycles: 10,000 flash/100,000 EEPROM Optional boot code section with independent lock bits In system programming by on-chip boot program True read while write...

Price BDT 840
More
In-Stock
Arduino Pro Micro 5V/16MHz Type-C Robotics Bangladesh Quick view

Reference: RBD-2053

Arduino Pro Micro 5V/16MHz Type-C

ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD

Price BDT 950
More
Out-of-Stock
S2 Mini V1.0.0 ESP32-S2 4MB FLASH 2MB PSRAM WIFI Development Board Robotics Bangladesh Quick view

Reference: RBD-2131

S2 Mini V1.0.0 ESP32-S2 4MB FLASH 2MB PSRAM WIFI Development Board

ESP32-S2 based WIFI development board Features S2FN4R2 WIFI IC Equipped with 4MB FLASH and 2MB PSRAM Type-C USB connectivity 27 digital input/output pins with support for interrupt/pwm/I2C/single wire ADC, DAC, I2C, SPI, UART, USB OTG

Price BDT 690
More
In-Stock
On sale! Arduino Uno R3 SMD Robotics Bangladesh Quick view

Reference: RBD-0323

Arduino Uno R3 SMD

Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.

Price BDT 860
More
In-Stock
NodeMCU ESP8266 Expansion Base Board Robotics Bangladesh Quick view

Reference: RBD-1402

NodeMCU ESP8266 Expansion Base Board

The perfect solution for breaking out the pins from Lua V3 Nodemcu. Lead-out all the IO ports of the ESP-12E development board Lead out the pins of 5V and 3.3V power supply Convenient to connect with peripheral modules Onboard 5V / 1A DC-DC step-down converter circuit Onboard power indicator With DC power jack 6-24V.

Price BDT 250
More
In-Stock
LILYGO® TTGO T-Display ESP32 WiFi And Bluetooth Development Board Robotics Bangladesh Quick view

Reference: RBD-1806

LILYGO® TTGO T-Display ESP32 WiFi And Bluetooth Development Board

Based on ESP32 240MHz Xtensa dual-core 32-bit microprocessor Operating Voltage: 2.7V – 4.2V Working Current: 60mA Battery Charging Current: 500mA

Price BDT 2,650
More
In-Stock
Cable For Arduino UNO/MEGA (USB A to B)-3. Quick view

Reference: RBD-1761

Cable For Arduino UNO/MEGA (USB A to B)-3.2 Feet/1Meter

USB Type: Type-A to Type-B Weight: 80 gm. Length: 1m / 3.2Feet Long cable for easy work Fully compatible with the PC. Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.

Price BDT 195
More
In-Stock
LilyPad SMD LED Blue Color Robotics Bangladesh Quick view

Reference: RBD-2238

LilyPad SMD LED Blue Color

Wearable e-textile technology.  Designed with large sew tabs LED Blue Color

Price BDT 18
More
In-Stock

XNUCLEO-F411RE - Improved STM32 NUCLEO Board Robotics Bangladesh Quick view

Reference: RBD-1133

XNUCLEO-F411RE - Improved STM32 NUCLEO Board

Compatible with NUCLEO-F411RE, onboard Cortex-M4 microcontroller STM32F411RET6 Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion Supports mbed, build prototype quickly by mbed SDK and online tools...

Price BDT 7,990
More
Last items in stock
LilyPad SMD LED Green Color Robotics Bangladesh Quick view

Reference: RBD-2240

LilyPad SMD LED Green Color

Wearable e-textile technology.  Designed with large sew tabs LED Green Color

Price BDT 18
More
In-Stock
MicroPython Board R3 ATmega328P+ESP8266, 8Mb flash, USB-TTL CH340G, Micro-USB Robotics Bangladesh Quick view

Reference: RBD-1603

MicroPython Board R3 ATmega328P+ESP8266, 8Mb flash, USB-TTL CH340G, Micro-USB

USB-TTL converter. Logic Level: 5V. Operating Supply Voltage: 5V. Digital I/O Pins: 14. Analog I/O Pins: 6.

Price BDT 1,200
More
In-Stock
Arduino Mega 2560 CH340 Robotics Bangladesh Quick view

Reference: RBD-1397

Arduino Mega 2560 CH340

Programmer: CH340 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader

Price BDT 1,498
More
In-Stock
AVRISP Atmel STK500 AVR programmer USB Atmega Attiny Robotics Bangladesh Quick view

Reference: RBD-1110

AVRISP Atmel STK500 AVR programmer USB Atmega Attiny

Supports a wide range of ATMEL AVR microcontroller. Works with AVR Studio or WINAVR(GCC) Works with ATMEL AVR Studio 4.13

Price BDT 2,900
More
In-Stock
ESP32 ESP-32S 30P NodeMCU Development Board Wireless WiFi Robotics Bangladesh Quick view

Reference: RBD-0948

ESP32 ESP-32S 30P NodeMCU Development Board Wireless WiFi

Built-in Flash: 32Mbit Power supply: 5V WiFi protocol: IEEE 802.11 b/g/n Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S Logic level: 3.3V A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and...

Price BDT 740
More
In-Stock
Customers who bought this product also bought:
ESP32 V1.3 Dev Board CH340C NodeMCU-32 Robotics Bangladesh Quick view

Reference: RBD-2268

ESP32 V1.3 Dev Board CH340C NodeMCU-32

Features WiFi+Bluetooth connectivity with the ESP-WROOM-32 module Accessible I/O pins via extension headers for easy customization Onboard USB CH340 for convenient programming and debugging 2x keys for reset or user-defined functions ESP32S-DEV development board is a cost-effective solution for a wide range of applications.A high-quality USB cable is...

Price BDT 610
More
In-Stock

Our last Google reviews

 
View all reviews

  • Frequently purchased together

    Altera Cyclone IV FPGA EP4CE6E22C8N EP4CE6 Development Board Robotics Bangladesh Quick view

    Reference: RBD-1807

    Altera Cyclone IV FPGA EP4CE6E22C8N EP4CE6 Development Board

    Altera Cyclone IV FPGA EP4CE6E22C8N EP4CE6 Development Board

    Price BDT 4,990
    More
    In-Stock
    MicroPython Board R3 ATmega328P+ESP8266, 8Mb flash, USB-TTL CH340G, Micro-USB Robotics Bangladesh Quick view

    Reference: RBD-1603

    MicroPython Board R3 ATmega328P+ESP8266, 8Mb flash, USB-TTL CH340G, Micro-USB

    USB-TTL converter. Logic Level: 5V. Operating Supply Voltage: 5V. Digital I/O Pins: 14. Analog I/O Pins: 6.

    Price BDT 1,200
    More
    In-Stock
    AI-thinker A9G GSM/GPRS+GPS/BDS Development Board Robotics Bangladesh Quick view

    Reference: RBD-1138

    AI-thinker A9G GSM/GPRS+GPS/BDS Development Board

    Board Based On AI-Thinker A9 GPRS Module Supports Firmware Upgrade Via Serial Port Operating Voltage: 5v

    Price BDT 1,940
    More
    In-Stock
    ESP8266 CH340 NodeMCU Wifi Module Lua V3 Robotics Bangladesh Quick view

    Reference: RBD-0694

    ESP8266 CH340 NodeMCU Wifi Module Lua V3

    Power input: 4.5V ~ 9V (10VMAX), USB-powered Transfer rate: 110-460800bps Support UART / GPIO data communication interface Support Smart Link Smart Networking Working temperature: -40°C ~ + 125°C Drive Type: Dual high-power H-bridge Don’t need to download resetting A great set of tools to develop ESP8266 Flash size: 4MByte Lowest cost WI-FI Note: The...

    Price BDT 420
    More
    Last items in stock
    NodeMCU ESP8266 with 0.96 Inch OLED Module Development Board Robotics Bangladesh Quick view

    Reference: RBD-1255

    NodeMCU ESP8266 with 0.96 Inch OLED Module Development Board

    Integrated 0.96″ OLED Micro USB connection Compatible with Arduino Compatible with NodeMCU(Lua for ESP8266) Input Power 5V Compatible for Arduino Compatible with NodeMCU(Lua for ESP8266)A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please...

    Price BDT 1,250
    More
    In-Stock
    37 In 1 Sensor Module Board Set Kit For Arduino with Box Robotics Bangladesh Quick view

    Reference: RBD-1541

    37 In 1 Sensor Module Board Set Kit For Arduino with Box

    For beginners who are interested in Arduino A complete set of Arduino’s most common and useful electronic components Infrared sensor receiving module Laser sensor module Temperature and humidity sensor module Infrared sensor module 5v relay module Obstacle avoidance sensor module.

    Price BDT 1,990
    More
    In-Stock
    Arduino Mega 2560 R3 Robotics Bangladesh Quick view

    Reference: RBD-0009

    Arduino Mega 2560 R3

    54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.

    Price BDT 1,995
    More
    Sold-out
    LILYGO® TTGO T-Display ESP32 WiFi And Bluetooth Development Board Robotics Bangladesh Quick view

    Reference: RBD-1806

    LILYGO® TTGO T-Display ESP32 WiFi And Bluetooth Development Board

    Based on ESP32 240MHz Xtensa dual-core 32-bit microprocessor Operating Voltage: 2.7V – 4.2V Working Current: 60mA Battery Charging Current: 500mA

    Price BDT 2,650
    More
    In-Stock

  • Products from the same category

    On sale! Arduino Uno R3 Robotics Bangladesh Quick view

    Reference: RBD-0094

    Arduino Uno R3

    The Arduino Uno R3 High-Quality Edition Arduino UNO in Bangladesh Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...

    Price BDT 1,100
    More
    In-Stock
    On sale! Arduino Uno R3 SMD Robotics Bangladesh Quick view

    Reference: RBD-0323

    Arduino Uno R3 SMD

    Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.

    Price BDT 860
    More
    In-Stock
    On sale! STM32F103C8T6 Blue Pill Development Board Robotics Bangladesh Quick view

    Reference: RBD-0350

    STM32F103C8T6 Blue Pill Development Board Imported Chipset

    100% Brand new and high quality STM32 Board Model: STM32F103C8T6. Core: ARM 32 Cortex-M3 CPU. Debug mode: SWD. 72MHz work frequency. 64K flash memory, 20K SRAM. RoboticsBD 2.0-3.6V power, I/O.

    Price BDT 745
    More
    In-Stock
    NodeMCU Mega WiFi R3 Atmega2560 ESP8266 32Mb Memory Board Robotics Bangladesh Quick view

    Reference: RBD-2138

    NodeMCU Mega WiFi R3 Atmega2560 ESP8266 32Mb Memory Board

    Arduino compatibility Full integration USB-TTL converter 32 Mb flash memory Dual microcontrollersA high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and instead use the recommended cable available here:...

    Price BDT 1,890
    More
    In-Stock
    ESP32 V1.3 Dev Board CH340C NodeMCU-32 Robotics Bangladesh Quick view

    Reference: RBD-2268

    ESP32 V1.3 Dev Board CH340C NodeMCU-32

    Features WiFi+Bluetooth connectivity with the ESP-WROOM-32 module Accessible I/O pins via extension headers for easy customization Onboard USB CH340 for convenient programming and debugging 2x keys for reset or user-defined functions ESP32S-DEV development board is a cost-effective solution for a wide range of applications.A high-quality USB cable is...

    Price BDT 610
    More
    In-Stock
    Arduino Mega 2560 R3 Robotics Bangladesh Quick view

    Reference: RBD-0009

    Arduino Mega 2560 R3

    54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.

    Price BDT 1,995
    More
    Sold-out
    Arduino Mega 2560 CH340 Robotics Bangladesh Quick view

    Reference: RBD-1397

    Arduino Mega 2560 CH340

    Programmer: CH340 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader

    Price BDT 1,498
    More
    In-Stock
    Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU Robotics Bangladesh Quick view

    Reference: RBD-1214

    Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU

    The board is compatible with Mega 2560.  excellent solution for developing projects based on ATmega2560. The board can be powered directly through the Micro USB connector The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.

    Price BDT 1,650
    More
    In-Stock

  • New products

    No products available