Arduino Pro Micro 5V/16MHz Robotics Bangladesh
  • Arduino Pro Micro 5V/16MHz Robotics Bangladesh

Arduino Pro Micro 5V/16MHz

RBD-0838
  • ATMEGA32U4 running in 5V / 16MHz
  • Support Arduino IDE V1.0.1
  • Micro USB interface programming on the board
  • Four 10-bit ADC pin
  • 12 digital I / O (5 PWM capability)
  • Rx and Tx hardware serial connection. RoboticsBD
BDT 870
rating Read the 11 reviews
Average rating: 5/5 - Number of reviews: 11
Quantity
In-Stock

8 people have purchased this item in last 12 months
151 people recently added this item to the cart
32 items in stock
notifications Notify Me
  • Store Pickup Available! Store Pickup Available!
  • Free Ship Over 5000 BDT Free Ship Over 5000 BDT
  • Quality Product Quality Product
  • No Warranty No Warranty
  • No Replacement No Replacement

This Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like.

There is a voltage regulator on board, so it can accept up to 12V DC. RoboticsBD

The Micro is a microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. RoboticsBD

It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits.  Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

 

Features :

  1. ATMEGA32U4 running in 5V / 16MHz
  2. Support Arduino IDE V1.0.1
  3. Micro USB interface programming on the board
  4. Four 10-bit ADC pin
  5. 12 digital I / O (5 PWM capability)
  6. Rx and Tx hardware serial connection.
Pin Diagram:

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

General Specification
Microcontroller ATmega32U4
Input Voltage(Recommended) 7-12V
Operating Voltage (VDC) 5
Input Voltage (limits) 6-20V
Analog I/O Pins 12
Digital I/O Pins 20
DC Current per I/O Pin (mA) 20
DC Current for 3.3V Pin (mA) 50
PWM Pins 7
Flash Memory 32 KB
EEPROM 2.5KB
SRAM 1
Clock Speed 16 MHz
Dimensions (mm) LxWxH 48x18x8
Weight (gm) 13
Shipment Weight 0.06 kg
Shipment Dimensions 8 × 6 × 4 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Documentation :

  1. Arduino Pro Micro Driver
  2. Windows Driver Installation Guide
  3. Hookup Guide
  4. Arduino Pro-micro Schematics

Package Includes :

1 x Arduino Pro Micro 5V/16MHz

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

What is the price of Arduino Pro Micro 5V/16MHz in Bangladesh?

The latest price of Arduino Pro Micro 5V/16MHz in Bangladesh is BDT 870 You can buy the Arduino Pro Micro 5V/16MHz at best price from our RoboticsBD or visit RoboticsBD Office.

Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product.

Product Images are shown for illustrative purposes only and may differ from the actual product.
Product Details
RBD-0838
32 Items
Good product
rating
15/08/2022
Sadman alvee
Suitable for keyboard.h header file
Quality
rating
30/04/2022
Tanveer
very good quality product and excellent packaging
Will order more
rating
13/12/2020
Salman Sahel
Works as intended and is amazing!
Nice
rating
25/08/2020
Rifat Rahman
Good
Arduino Pro Micro 5V/16MHz
rating
18/07/2020
Hasib Ahmed Soyad
fast delivery and good product and good packaging....\r\n
Great quality
rating
15/07/2020
Rahat
Great quality
.
rating
20/02/2020
Shimanto
Nice products
All correct
rating
17/02/2020
Asif Imtiaz
I bought two of these. Both of them are functional. Delivery took 1 day only. Looking forward to buy more stuffs from you
Quality
rating
23/11/2019
Shakil Hossain
Awesome
Produced
rating
04/11/2019
Mirad
Tnx ....it\'s good
Can I add SD card on this board?
rating
17/02/2020
Amir Hamja
I want to turn this board into a USB rubber ducky, but I'm not sure that I can add an SD card slot on it!
You might also like
Arduino Mega 2560 R3 Robotics Bangladesh Quick view

Reference: RBD-0009

Arduino Mega 2560 R3

54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.

Price BDT 1,995
More
Sold-out
Arduino Nano Robotics Bangladesh Quick view

Reference: RBD-0032

Arduino Nano

USB Driver: CH340 Operating Voltage (logic level): 5V With Mini USB 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please select...

Price BDT 730
More
In-Stock
On sale! Arduino Uno R3 Robotics Bangladesh Quick view

Reference: RBD-0094

Arduino Uno R3

The Arduino Uno R3 High-Quality Edition Arduino UNO in Bangladesh Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...

Price BDT 1,100
More
In-Stock
Breadboard Full Size Bare 830 Tie Points Robotics Bangladesh Quick view

Reference: RBD-0133

Breadboard Full Size Bare 830 Tie Points

830 Solder-less Points Ideal for Experimenting With Circuit Design In Labs Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components Colored coordinates for easy components placement. Accept a variety of wire sizes 20-29 AWG

Price BDT 139
More
In-Stock
Arduino Due Robotics Bangladesh Quick view

Reference: RBD-0136

Arduino Due

Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-16V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. CPU clock at 84Mhz 96KBytes of SRAM

Price BDT 3,500
More
In-Stock
Breadboard Power Supply Module 3. Quick view

Reference: RBD-0549

Breadboard Power Supply Module 3.3V 5V

Breadboard power supply module, compatible with 5V, 3.3V. RoboticsBD Apply to MB102 breadboard Input voltage: 6.5-12 V (DC) or USB power supply Output voltage: 3.3V/5V can switch over Maximum output current: <700 ma Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V On-board two groups of 3.3V, 5V DC output plug pin, convenient...

Price BDT 99
More
In-Stock
Breadboard Jumper Wire Set Robotics Bangladesh Quick view

Reference: RBD-1153

Breadboard Jumper Wire Set

135 quality jumper Color: red, orange, yellow, green, blue, purple, gray, brown, white. Box size: 165 × 55 × 10 (LxWxH) mm. 140 pcs of 22 AWG solid wires

Price BDT 200
More
In-Stock
Arduino Pro Mini 328 5V/16Mhz Robotics Bangladesh Quick view

Reference: RBD-1523

Arduino Pro Mini 328 5V/16Mhz

Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.

Price BDT 620
More
Sold-out
30 other products in the same category:
1 Meter Mini USB Cable for Arduino Nano Robotics Bangladesh Quick view

Reference: RBD-2162

1 Meter Mini USB Cable for Arduino Nano

USB Type: Type-A to Mini-B Length: 1 meter/ 3.2 Feet Exclusively designed for Arduino boards.  Compatible with Arduino Nano Larger Cable

Price BDT 195
More
In-Stock
Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU Robotics Bangladesh Quick view

Reference: RBD-1214

Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU

The board is compatible with Mega 2560.  excellent solution for developing projects based on ATmega2560. The board can be powered directly through the Micro USB connector The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.

Price BDT 1,650
More
In-Stock
LilyPad Button Board Robotics Bangladesh Quick view

Reference: RBD-2243

LilyPad Button Board

Wearable e-textile technology.  Designed with large sew tabs Button Board

Price BDT 30
More
In-Stock
WeMos D1 R32 Mini ESP32 WIFI Bluetooth Development Board Robotics Bangladesh Quick view

Reference: RBD-2164

WeMos D1 R32 Mini ESP32 WIFI Bluetooth Development Board

WeMos D1 R32 Mini ESP32 WIFI Bluetooth Development Board CH340 chip for compatibility with Arduino UNO R3 Supports WIFI and Bluetooth connectivity Comes with a Type-B/Micro USB adapter

Price BDT 650
More
In-Stock
Altera Cyclone IV FPGA EP4CE6E22C8N EP4CE6 Development Board Robotics Bangladesh Quick view

Reference: RBD-1807

Altera Cyclone IV FPGA EP4CE6E22C8N EP4CE6 Development Board

Altera Cyclone IV FPGA EP4CE6E22C8N EP4CE6 Development Board

Price BDT 4,990
More
In-Stock
NodeMCU Mega WiFi R3 Atmega2560 ESP8266 32Mb Memory Board Robotics Bangladesh Quick view

Reference: RBD-2138

NodeMCU Mega WiFi R3 Atmega2560 ESP8266 32Mb Memory Board

Arduino compatibility Full integration USB-TTL converter 32 Mb flash memory Dual microcontrollersA high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and instead use the recommended cable available here:...

Price BDT 1,890
More
In-Stock
Wemos LOLIN D32 V1 - ESP32 - CH340C Robotics Bangladesh Quick view

Reference: RBD-2270

Wemos LOLIN D32 V1 - ESP32 - CH340C

Powerful and versatile ESP32 SoC with WiFi and Bluetooth connectivity 4MB of flash memory and 520KB of SRAM for storing firmware and data Compatible with the Arduino development environment for easy programming Input/output pins for connecting to sensors, actuators, and other peripherals Can be programmed using MicroPython, a high-level programming...

Price BDT 610
More
In-Stock
LilyPad SMD LED Green Color Robotics Bangladesh Quick view

Reference: RBD-2240

LilyPad SMD LED Green Color

Wearable e-textile technology.  Designed with large sew tabs LED Green Color

Price BDT 18
More
In-Stock
Arduino Nano R3 Robotics Bangladesh Quick view

Reference: RBD-0926

Arduino Nano R3

USB Driver: FT232 Manufacturer: Gravitech Operating Voltage (logic level): 5V 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please...

Price BDT 850
More
In-Stock
50 cm Cable For Arduino UNO/MEGA (USB A to B) Robotics Bangladesh Quick view

Reference: RBD-2196

50 cm Cable For Arduino UNO/MEGA (USB A to B)

USB Type: Type-A to Type-B Weight: 26 gm. Length: 50 cm Long cable for easy work Fully compatible with the PC. Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.

Price BDT 130
More
In-Stock
ESP32 30P Development Expansion board Robotics Bangladesh Quick view

Reference: RBD-2271

ESP32 30P Development Expansion board

Wide compatibility with ESP32-DevKitC(30P) series boards Safe and reliable with stable power and signal transmission Extended GVS interface for easy connection to various electronic modules and sensors JUMP interface for easy reuse of all pins, making it ideal for DIY projects Versatile and reliable option suitable for a wide range of projects

Price BDT 450
More
In-Stock
LilyPad SMD LED Red Color Robotics Bangladesh Quick view

Reference: RBD-2239

LilyPad SMD LED Red Color

Wearable e-textile technology.  Designed with large sew tabs LED Red Color

Price BDT 18
More
In-Stock
LILYGO® TTGO T-Display ESP32 WiFi And Bluetooth Development Board Robotics Bangladesh Quick view

Reference: RBD-1806

LILYGO® TTGO T-Display ESP32 WiFi And Bluetooth Development Board

Based on ESP32 240MHz Xtensa dual-core 32-bit microprocessor Operating Voltage: 2.7V – 4.2V Working Current: 60mA Battery Charging Current: 500mA

Price BDT 2,650
More
In-Stock
ESP32 For Wemos D1 Mini WIFI Bluetooth Development Board Robotics Bangladesh Quick view

Reference: RBD-2137

ESP32 For Wemos D1 Mini WIFI Bluetooth Development Board

ESP32 Development Board Integrated antenna and RF balun Dual-mode Wi-Fi and Bluetooth chips Small size and high performance-price ratio Compatible with Arduino

Price BDT 890
More
In-Stock
LilyPad SMD LED Blue Color Robotics Bangladesh Quick view

Reference: RBD-2238

LilyPad SMD LED Blue Color

Wearable e-textile technology.  Designed with large sew tabs LED Blue Color

Price BDT 18
More
In-Stock
On sale! Arduino Uno R3 SMD Robotics Bangladesh Quick view

Reference: RBD-0323

Arduino Uno R3 SMD

Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.

Price BDT 860
More
In-Stock
Cable For Arduino UNO/MEGA (USB A to B)-3. Quick view

Reference: RBD-1761

Cable For Arduino UNO/MEGA (USB A to B)-3.2 Feet/1Meter

USB Type: Type-A to Type-B Weight: 80 gm. Length: 1m / 3.2Feet Long cable for easy work Fully compatible with the PC. Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.

Price BDT 195
More
In-Stock
AI-thinker A9G GSM/GPRS+GPS/BDS Development Board Robotics Bangladesh Quick view

Reference: RBD-1138

AI-thinker A9G GSM/GPRS+GPS/BDS Development Board

Board Based On AI-Thinker A9 GPRS Module Supports Firmware Upgrade Via Serial Port Operating Voltage: 5v

Price BDT 1,940
More
In-Stock
LilyPad Slide Switch Robotics Bangladesh Quick view

Reference: RBD-2244

LilyPad Slide Switch

Wearable e-textile technology.  Designed with large sew tabs Slide Switch

Price BDT 48
More
In-Stock
MicroPython Board R3 ATmega328P+ESP8266, 8Mb flash, USB-TTL CH340G, Micro-USB Robotics Bangladesh Quick view

Reference: RBD-1603

MicroPython Board R3 ATmega328P+ESP8266, 8Mb flash, USB-TTL CH340G, Micro-USB

USB-TTL converter. Logic Level: 5V. Operating Supply Voltage: 5V. Digital I/O Pins: 14. Analog I/O Pins: 6.

Price BDT 1,200
More
In-Stock
Digispark Pro - ATtiny167 with Micro USB Robotics Bangladesh Quick view

Reference: RBD-1809

Digispark Pro - ATtiny167 with Micro USB

Digispark Pro  ATtiny167  Micro USB 16MHz

Price BDT 690
More
In-Stock
NodeMCU ESP8266 with 0.96 Inch OLED Module Development Board Robotics Bangladesh Quick view

Reference: RBD-1255

NodeMCU ESP8266 with 0.96 Inch OLED Module Development Board

Integrated 0.96″ OLED Micro USB connection Compatible with Arduino Compatible with NodeMCU(Lua for ESP8266) Input Power 5V Compatible for Arduino Compatible with NodeMCU(Lua for ESP8266)A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please...

Price BDT 1,250
More
In-Stock
S2 Mini V1.0.0 ESP32-S2 4MB FLASH 2MB PSRAM WIFI Development Board Robotics Bangladesh Quick view

Reference: RBD-2131

S2 Mini V1.0.0 ESP32-S2 4MB FLASH 2MB PSRAM WIFI Development Board

ESP32-S2 based WIFI development board Features S2FN4R2 WIFI IC Equipped with 4MB FLASH and 2MB PSRAM Type-C USB connectivity 27 digital input/output pins with support for interrupt/pwm/I2C/single wire ADC, DAC, I2C, SPI, UART, USB OTG

Price BDT 690
More
In-Stock
NodeMcu Lua WIFI Board Based on ESP8266 CP2102 Module Robotics Bangladesh Quick view

Reference: RBD-1821

NodeMcu Lua WIFI Board Based on ESP8266 CP2102 Module

Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled Arduino-like hardware IO Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units Onboard USB to serial chip to easily program and upload codes from the Arduino IDE Easy to use breadboard friendly form...

Price BDT 650
More
In-Stock
WeMos D1 CH340 WiFi Development Board ESP8266 ESP-12F Robotics Bangladesh Quick view

Reference: RBD-1602

WeMos D1 CH340 WiFi Development Board ESP8266 ESP-12F

Microcontroller: ESP8266EX Operating Voltage: 3.3V Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0) Analog Input Pins: 1 Flash Memory: 4MB On-Board Switching Power Supply: Input Voltage Range: 9V to 12V Output: 5V at 1A Max

Price BDT 520
More
In-Stock
On sale! Arduino LilyPad 328 ATmega328P Robotics Bangladesh Quick view

Reference: RBD-0682

Arduino LilyPad 328 ATmega328P

Microcontroller: ATmega168 or ATmega328V Operating Voltage: 2.7-5.5 V Digital I/O Pins: 14 PWM Channels: 6 Analog Input Channels: 6 DC Current per I/O Pin: 40 mA Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! RoboticsBD

Price BDT 699
More
In-Stock
Arduino NANO I/O Extension Shield Robotics Bangladesh Quick view

Reference: RBD-0987

Arduino NANO I/O Extension Shield

Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments.

Price BDT 350
More
In-Stock
Cable For Arduino Leonardo/ DUE (USB A to Micro B)-30cm Robotics Bangladesh Quick view

Reference: RBD-1875

Cable For Arduino Leonardo/ DUE (USB A to Micro B)-30cm

Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.

Price BDT 200
More
In-Stock
Arduino Leonardo R3 Robotics Bangladesh Quick view

Reference: RBD-0154

Arduino Leonardo R3

Microcontroller: ATmega32u4 Operating Voltage: 5V Input Voltage (Recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 20 PWM Channels: 7 Analog Input Channels: 12

Price BDT 1,299
More
In-Stock
Arduino Pro Micro 5V/16MHz Type-C Robotics Bangladesh Quick view

Reference: RBD-2053

Arduino Pro Micro 5V/16MHz Type-C

ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD

Price BDT 950
More
Out-of-Stock
Customers who bought this product also bought:
5K Ohm Potentiometer Robotics Bangladesh Quick view

Reference: RBD-1884

5K Ohm Potentiometer

Resistance: 5k Ω. Tolerance: 20%. Shaft Length: 15mm.

Price BDT 20
More
In-Stock
On sale! FTDI USB to TTL Serial Converter Adapter FT232RL Robotics Bangladesh Quick view

Reference: RBD-0658

FTDI USB to TTL Serial Converter Adapter FT232RL

Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini Original FTDI FT232 chip, stable performance USB power has current protection, using 500MA self-restore fuse RXD/TXD transceiver communication indicator With power, sending, receiving indicator, working status LED indicators Mini USB Port Connection Support 3.3V, 5V...

Price BDT 359
More
In-Stock
Rotary Potentiometer with limit switch Robotics Bangladesh Quick view

Reference: RBD-1370

Rotary Potentiometer with limit switch

Name: PTV09A-4020F-B103 Package/Case: POT

Price BDT 30
More
In-Stock
Rocker Switch ON/OFF KCD1-101 2pin Robotics Bangladesh Quick view

Reference: RBD-0994

Rocker Switch ON/OFF KCD1-101 2pin

KCD1-101 10 Amp Rocker Switch 2 pin, ON-OFF, black and red color of button for your choice

Price BDT 10
More
In-Stock
Heat Shrink Tube Robotics Bangladesh Quick view

Reference: 0984

Heat Shrink Tube

Choose your desire Heat Sink Size from below: 

Price BDT 2
More
In-Stock
50 cm Micro USB Cable for Arduino Leonardo and Node MCU Robotics Bangladesh Quick view

Reference: RBD-2195

50 cm Micro USB Cable for Arduino Leonardo and Node MCU

Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.

Price BDT 150
More
In-Stock
Push Button Switch (2PIN) Robotics Bangladesh Quick view

Reference: RBD-0761

Push Button Switch (2PIN)

Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical

Price BDT 6
More
In-Stock
Zener Diode4148 100V 1/4W(Pack of 5) Robotics Bangladesh Quick view

Reference: RBD-1458

Zener Diode4148 100V 1/4W(Pack of 5)

4148 100V 1/4W Zener Diode

Price BDT 5
More
In-Stock

Our last Google reviews

 
View all reviews

  • Frequently purchased together

    Kiloohm (KΩ) 1/4w Resistors - Pack of 5 Robotics Bangladesh Quick view

    Reference: 0245

    Kiloohm (KΩ) 1/4w Resistors - Pack of 5

    Choose your desire Resistor value from below: 

    Price BDT 5
    More
    In-Stock
    On sale! Arduino Uno R3 Robotics Bangladesh Quick view

    Reference: RBD-0094

    Arduino Uno R3

    The Arduino Uno R3 High-Quality Edition Arduino UNO in Bangladesh Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...

    Price BDT 1,100
    More
    In-Stock
    ESP8266 CH340 NodeMCU Wifi Module Lua V3 Robotics Bangladesh Quick view

    Reference: RBD-0694

    ESP8266 CH340 NodeMCU Wifi Module Lua V3

    Power input: 4.5V ~ 9V (10VMAX), USB-powered Transfer rate: 110-460800bps Support UART / GPIO data communication interface Support Smart Link Smart Networking Working temperature: -40°C ~ + 125°C Drive Type: Dual high-power H-bridge Don’t need to download resetting A great set of tools to develop ESP8266 Flash size: 4MByte Lowest cost WI-FI Note: The...

    Price BDT 420
    More
    Last items in stock
    Male Pin Header Single Row (Short) Robotics Bangladesh Quick view

    Reference: RBD-0654

    Male Pin Header Single Row (Short)

    Single row. 2.54mm pitch. 1 x 40 pins. Through-hole mount. RoboticsBD

    Price BDT 10
    More
    In-Stock
    Heat Shrink Tube Robotics Bangladesh Quick view

    Reference: 0984

    Heat Shrink Tube

    Choose your desire Heat Sink Size from below: 

    Price BDT 2
    More
    In-Stock
    Jumper Wire 40 Pcs Set 20cm Robotics Bangladesh Quick view

    Reference: 0031

    Jumper Wire 40 Pcs Set 20cm

    3 Types Available (Please select from option) 1. Male to Male  2. Male to Female 3. Female-Female

    Price BDT 95
    More
    In-Stock
    Digispark Kickstarter ATTINY85 Arduino General Micro USB Development Board Robotics Bangladesh Quick view

    Reference: RBD-0349

    Digispark Kickstarter ATTINY85 Arduino General Micro USB Development Board

    Support for the Arduino IDE 1.0 + (OSX/Windows/Linux). Power via USB or External Source or 7-16 v to 5 v (automatic selection).RoboticsBD The Onboard, 150 ma 5 v Regulator. Built-in USB and serial were debugging). 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming...

    Price BDT 390
    More
    In-Stock
    Arduino Pro Mini 328 5V/16Mhz Robotics Bangladesh Quick view

    Reference: RBD-0155

    Arduino Pro Mini 328 5V/16Mhz

    Microcontroller: ATmega328 Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Support serial download.

    Price BDT 680
    More
    In-Stock

  • Products from the same category

    On sale! Arduino Uno R3 Robotics Bangladesh Quick view

    Reference: RBD-0094

    Arduino Uno R3

    The Arduino Uno R3 High-Quality Edition Arduino UNO in Bangladesh Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...

    Price BDT 1,100
    More
    In-Stock
    On sale! Arduino Uno R3 SMD Robotics Bangladesh Quick view

    Reference: RBD-0323

    Arduino Uno R3 SMD

    Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.

    Price BDT 860
    More
    In-Stock
    On sale! STM32F103C8T6 Blue Pill Development Board Robotics Bangladesh Quick view

    Reference: RBD-0350

    STM32F103C8T6 Blue Pill Development Board Imported Chipset

    100% Brand new and high quality STM32 Board Model: STM32F103C8T6. Core: ARM 32 Cortex-M3 CPU. Debug mode: SWD. 72MHz work frequency. 64K flash memory, 20K SRAM. RoboticsBD 2.0-3.6V power, I/O.

    Price BDT 745
    More
    In-Stock
    NodeMCU Mega WiFi R3 Atmega2560 ESP8266 32Mb Memory Board Robotics Bangladesh Quick view

    Reference: RBD-2138

    NodeMCU Mega WiFi R3 Atmega2560 ESP8266 32Mb Memory Board

    Arduino compatibility Full integration USB-TTL converter 32 Mb flash memory Dual microcontrollersA high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and instead use the recommended cable available here:...

    Price BDT 1,890
    More
    In-Stock
    ESP32 V1.3 Dev Board CH340C NodeMCU-32 Robotics Bangladesh Quick view

    Reference: RBD-2268

    ESP32 V1.3 Dev Board CH340C NodeMCU-32

    Features WiFi+Bluetooth connectivity with the ESP-WROOM-32 module Accessible I/O pins via extension headers for easy customization Onboard USB CH340 for convenient programming and debugging 2x keys for reset or user-defined functions ESP32S-DEV development board is a cost-effective solution for a wide range of applications.A high-quality USB cable is...

    Price BDT 610
    More
    In-Stock
    Arduino Mega 2560 R3 Robotics Bangladesh Quick view

    Reference: RBD-0009

    Arduino Mega 2560 R3

    54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.

    Price BDT 1,995
    More
    Sold-out
    Arduino Mega 2560 CH340 Robotics Bangladesh Quick view

    Reference: RBD-1397

    Arduino Mega 2560 CH340

    Programmer: CH340 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader

    Price BDT 1,498
    More
    In-Stock
    Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU Robotics Bangladesh Quick view

    Reference: RBD-1214

    Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU

    The board is compatible with Mega 2560.  excellent solution for developing projects based on ATmega2560. The board can be powered directly through the Micro USB connector The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.

    Price BDT 1,650
    More
    In-Stock

  • New products

    No products available