How to Place an Order
Store Pick Up
Request for Quotation/ International Sourcing
Order Status
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0351
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
Reference: 0245
Choose your desire Resistor value from below:
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: 1353
Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0761
Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical
The GY-91 10-DOF Motion Tracking Module combines two highly sophisticated sensors — the MPU9250 and the BMP280 — to deliver a complete 9-axis motion tracking and environmental sensing solution. Designed for smartphones, tablets, wearable devices, drones, and embedded systems, this module offers precision motion sensing alongside barometric pressure measurement in an extremely compact and low-power package.
The magnetometer is currently inaccessible via I2C and therefore unavailable.
True 9dof: Gravity 10 DOF IMU AHRS BNO055 + BMP280
Store Pickup Available!
Free Ship Over 5000 BDT
Quality Product
No Warranty
No Replacement
The GY-91 10-DOF Motion Tracking Module combines two highly sophisticated sensors — the MPU9250 and the BMP280 — to deliver a complete 9-axis motion tracking and environmental sensing solution. Designed for smartphones, tablets, wearable devices, drones, and embedded systems, this module offers precision motion sensing alongside barometric pressure measurement in an extremely compact and low-power package.
The MPU9250 provides a 3-axis gyroscope, 3-axis accelerometer, for comprehensive orientation and motion tracking, while the BMP280 delivers accurate barometric pressure and temperature readings, ideal for altitude estimation.
With support for both I2C and SPI communication, the GY-91 module ensures easy integration into a wide range of microcontroller platforms, including Arduino, ESP32, STM32, and Raspberry Pi.
Combines MPU9250 (9-axis motion sensor) and BMP280 (barometric pressure sensor)
Measures acceleration, angular velocity, pressure, and temperature
Supports I2C and SPI interfaces for flexible communication
Low power consumption suitable for battery-powered projects
Internal 16-bit ADC for high-resolution data output
Wide gyroscope range: ±250, ±500, ±1000, ±2000 °/s
Wide accelerometer range: ±2g, ±4g, ±8g, ±16g
Pressure measurement range: 300hPa to 1100hPa
Operates on 3V to 5V supply with onboard voltage regulation
Module Model: GY-91
Sensor Chips: MPU9250 + BMP280
Power Supply: 3.0V – 5.0V (with onboard low dropout regulator)
Communication Protocols: I2C / SPI (selectable)
Gyroscope Range: ±250, ±500, ±1000, ±2000°/s
Accelerometer Range: ±2g, ±4g, ±8g, ±16g
Pressure Measurement Range: 300hPa – 1100hPa
ADC Resolution: 16-bit
Module Dimensions: Ultra-compact for easy integration
Connect the GY-91 module to your microcontroller via I2C or SPI.
Configure sensor settings (e.g., sample rate, measurement range) using your development platform.
Read motion (accelerometer, gyroscope) and environmental (pressure, temperature) data.
Use libraries available for Arduino, STM32, or other platforms to simplify integration.
Drone flight control systems
Robotics navigation and stabilization
Wearable fitness and health devices
Augmented and virtual reality (AR/VR) systems
GPS enhancement and dead reckoning
Environmental monitoring and altitude sensing
Smartphone and tablet motion tracking
1 x GY-91 MPU9250 + BMP280 10-DOF 9-Axis Gyro Compass Accelerometer Module
All-in-one solution for motion and environmental sensing
High-precision output with 16-bit ADC resolution
Ultra-compact and low-power design perfect for mobile and embedded systems
Easy communication setup with I2C or SPI support
Reliable performance for both hobby and professional projects
Unlock advanced motion and environmental sensing capabilities for your next project with the GY-91 MPU9250 + BMP280 10-DOF 9-Axis Module.
Order now and bring professional-grade sensing to your robotics, drone, or wearable designs!
The latest price of GY-91 MPU9250+BMP280 10-DOF 9-Axis Gyro Compass Accelerometer Module in Bangladesh is BDT 790 You can buy the GY-91 MPU9250+BMP280 10-DOF 9-Axis Gyro Compass Accelerometer Module at best price from our RoboticsBD or visit RoboticsBD Office.
|
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. |
|
Product Images are shown for illustrative purposes only and may differ from the actual product. |
Reference: RBD-0664
Supply Voltage: 3.3 V/ 5V. Interface Type: I²C, SPI. Sensing Range: ±2g, ±4g, ±8g, ±16g. Sensitivity X: 28.6 LSB/g. Sensitivity Y: 31.2 LSB/g. Sensitivity Z: 34.5 LSB/g. Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V. Free-Fall Detection. Tap/Double Tap Detection. RoboticsBD
Reference: RBD-3450
The GY-BMI160 Module integrates the powerful BOSCH BMI160 inertial measurement unit (IMU), delivering high-precision 6-axis motion sensing in an ultra-compact package. Designed for mobile phones, tablets, and wearable devices, the BMI160 combines a 3-axis accelerometer and 3-axis gyroscope to offer exceptional motion tracking performance with ultra-low...
Reference: RBD-3652
Brand: DFRobot
Triple axis accelerometer and magnetic sensor for tilt-compensated output. Applications include compassing, gaming, and vibration monitoring. Power: 3.6-8V.
Reference: RBD-3651
Brand: DFRobot
The BMM350 sensor measures magnetic fields on 3 axes using TMR tech, offers high sample rates, wide range, high resolution, and stability against field shocks.
Reference: RBD-3277
The GY-271 QMC5883L 3-Axis Magnetometer Sensor Module is a high-precision digital compass that measures the strength and direction of magnetic fields in three axes (X, Y, Z). Designed for robotic navigation, orientation detection, and motion tracking, this compact and efficient module is perfect for projects requiring accurate geomagnetic field...
Reference: RBD-2130
9DOF IMU module with compass, acceleration, and gyroscope sensors Captures nine different types of motion or orientation Measures 3-axis gyroscope, triaxial accelerometer, and triaxial magnetic field Power supply: 3-5V (internal low dropout regulator)
Reference: RBD-0687
Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V. Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C). Peak current: 1.12mA. RoboticsBD Operating Pressure: 300 hPa to 1100 hPa. Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
Reference: RBD-3653
Brand: DFRobot
Compact 10DOF sensor module integrates orientation and barometric sensors, supporting complex data processing for applications like AR, gaming, and wearables.
Reference: RBD-0812
Based on MAX30105 – heart rate, oximeter, smoke sensor Green, red, and infra-red LEDs Interface: I2C (address 0x57) Compatible with 3.3V and 5V logic levels.
Reference: RBD-0104
Chip built-in 16bit AD converter, 16-bit data output Driver Chip: MPU6050 Operating Voltage: 3-5V DC Communication: I2C/IIC Protocol Gyro Range: ± 250, 500, 1000, 2000 °/s Accelerometer Range: ± 2 ± 4 ± 8 ± 16 gChip Origin: InvenSense
Reference: RBD-0233
Brand: SparkFun Electronics
Description: This is the LSM9DS0, a versatile motion-sensing system-in-a-chip that houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. That’s right, 9 degrees of freedom (9dof) from a single IC!
Reference: RBD-0288
Three selectable full scales (250/500/2000dps) Factor in all g-ranges, up to 13-bit resolution at ±16 g 12-Bit ADC Coupled with Low Noise ARM Sensors Achieves 5 milli-gauss Resolution in ±8 Gauss Fields Pressure range:300 to1100hPa (+9000m to -500m above sea level) I2C interfaces Power supply: 3-5v
Reference: RBD-2743
Wide supply voltage 1.71 V to 3.6 V Independent IO power (1.8V) and power supply voltage compatible Ultra-low power consumption of ± 2g / ± 4G / ± 6g / ± 8G / ± 16g IIC / SPI digital output interface 16-bit data output Programmable Embedded State Machine Embedded temperature sensor Embedded self-test Embedded FIFO 10,000 g high impact resistance
Reference: RBD-0700
Operating Voltage: 3.3V-5.5V Low Power Consumption High Accuracy Small Size
Reference: RBD-2745
The LSM9DS1 is a versatile, motion-sensing system-in-a-chip. It houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer – nine degrees of freedom (9DOF) in a single IC! The LSM9DS1 is equipped with a digital interface, but even that is flexible: it supports both I2C and SPI, so you’ll be hard-pressed to find a microcontroller it doesn’t...
Reference: RBD-1913
Onboard LDO Voltage regulator Can be interfaced with 3V3 or 5V Microcontroller. Tap/Double Tap Detection Free-Fall Detection Analog output Build in ultra low noise linear LDO voltage regulator Built-in onboard filters, which reduce noise from the motor and other high current electronics Power LED
Reference: RBD-2783
The GY-51 LSM303DLH chip has an accelerometer, magnetometer, A / D converters and signal conditioning circuit integrated. Still, the communication to the processor is done through the I2C bus. Thus only one chip is required to achieve a six-axis data detection and output. The LSM303DLH requires very little peripheral devices.
Reference: RBD-2733
GY-50 L3G4200D 3-Axis Gyroscope Sensor Module Three selectable full scales (250/500/2000 dps) I2C and SPI digital output interface avail. Two I2C address you can select by jumpers 16 bit-rate value data output 8-bit temperature data output Wide supply voltage: 2.4 V to 3.6 V Low voltage-compatible IO (1.8 V) Embedded power-down and sleep...
Reference: RBD-0569
Acceleration, Gyroscope Power Supply: DC3.3V-5V Chip: MPU9250 Size: 22 mm x 17 mm. Gyro range : ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g 9 DOF modulesChinese Variant MP92 QFN24 PackageThe magnetometer is currently inaccessible via I2C and therefore unavailable.True 9dof: Gravity 10 DOF IMU AHRS BNO055 + BMP280 True 9dof: GY-BNO055...
Reference: RBD-1757
Supply Voltage: 3.3 V/ 5V. Interface Type: I²C, SPI. Sensing Range: ±2g, ±4g, ±8g, ±16g. Sensitivity: X: 28.6 LSB/g. Y: 31.2 LSB/g. Z: 34.5 LSB/g. Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V. Free-Fall Detection. Tap/Double Tap Detection.
Reference: RBD-0574
3-Axis Magnetoresistive Sensors and ASIC in a 3.0x3.0x0.9mm LCC Surface Mount Package Temperature Compensated Data Output and Temperature Output Automatic Offset Compensation. RoboticsBD
Reference: RBD-1202
3-axis magnetic electronic compass. Precise heading information. Operating Voltage: 3 -5 V DC. Driver Chip: HMC5883L / QMC5883L Communication: I2C protocol. Measuring range: ± 1.3-8 Gauss.Library: https://github.com/keepworking/Mecha_QMC5883Lhttps://www.arduino.cc/reference/en/libraries/qmc5883lcompass/
Reference: RBD-2448
This module serves to breakout the MMA8452Q chipset, a chip capable of providing 3 axis acceleration readings. The chipset features a 3 axis accelerometer (±2-8g) and an internal dropout regulator to allow the use of 5V and 3.3V supplies. When combined with free libraries it is possible to utilize the chipset's processing power to perform data conversions...
Reference: RBD-3598
The GY-BNO055 9DOF Absolute Orientation Sensor Module is a high-precision 9-axis IMU (Inertial Measurement Unit) breakout board that combines a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. Unlike traditional IMUs, the BNO055 simplifies complex motion tracking by integrating a high-speed ARM Cortex-M0 processor directly on the chip....
Reference: RBD-0334
The 9DOF MPU-9150 is the world’s first 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors. And guess what? You get to play with it.
Reference: RBD-0743
Wheelbase: 550mm Weight: 550g/720g(without/with gimbal) Adopts S800 upward tilt arm design – Plastic injection moduling Ensures hardness and lighter weight – Brushless gimbal compatible for FPV It comes with PCB center board of soldered The arm equips support ridges for better and faster forward flight. Features pre-threaded brass sleeves.
Reference: RBD-1811
AS5600 Magnetic Induction Angle Measurement Sensor
Reference: RBD-1919
Acceleration, Gyroscope Power Supply: DC3.3V-5V Chip: MPU9250 Gyro range : ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g 9 DOF modulesThe magnetometer is currently inaccessible via I2C and therefore unavailable.True 9dof: Gravity 10 DOF IMU AHRS BNO055 + BMP280 True 9dof: GY-BNO055 9DOF Absolute Orientation IMU Sensor Module (I2C) –...
Reference: RBD-1813
ICM-20948 MEMS Motion Tracking Device Sensor Board 9 Axis
Reference: RBD-2792
This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upright. Tilt the case over and the balls don't touch, thus not making a connection. There are numerous uses for these basic sensors, but keep in mind you might need to use some debouncing code, as the sensor...
Reference: RBD-1722
Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm. Module Size : approx. 26 x 36 x 4 (LxWxH) mm. Net weight : approx. 16 gm. Gross weight : approx. 17 gm. Mounting : approx. 3 mm. The default baud rate : 9600.
Reference: RBD-0665
Operating voltage: 5V Provide both digital and analog output Adjustable sensitivity. RoboticsBD Output LED indicator Compatible with Arduino TTL Compatible Bolt holes for easy installation
Reference: RBD-1023
Frequency (MHz) 1575 +/- 5 MHz Gain > 28 dBi (with LNA) Impedance (Ω) 50 Ω VSWR < 1.5 Polarization RHCP Power Handling (W) 50 watts Cable Length: 3Meter Connector: SMA-Male
Reference: RBD-1115
Connects PCBs: Ideal for connecting PCBs (Printed Circuit Boards) with through-hole mounting. Standard Pitch: 2.54mm pitch ensures compatibility with various components. Easy Integration: Single row of 40 male pins simplifies assembly. Durable Construction: Made with high-quality phosphor bronze for reliable connections.
Reference: RBD-0569
Acceleration, Gyroscope Power Supply: DC3.3V-5V Chip: MPU9250 Size: 22 mm x 17 mm. Gyro range : ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g 9 DOF modulesChinese Variant MP92 QFN24 PackageThe magnetometer is currently inaccessible via I2C and therefore unavailable.True 9dof: Gravity 10 DOF IMU AHRS BNO055 + BMP280 True 9dof: GY-BNO055...
Reference: RBD-0133
830 Solder-less Points Ideal for Experimenting With Circuit Design In Labs Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components Colored coordinates for easy components placement. Accept a variety of wire sizes 20-29 AWG
Reference: RBD-2098
Big Microphone Sound Sensor Module Sound Detection Sensor Module High Sensitive Voice Sensor
Reference: RBD-0022
This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit. There are only four pins that you need to worry about on the HC-SR04: VCC (Power),...
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0288
Three selectable full scales (250/500/2000dps) Factor in all g-ranges, up to 13-bit resolution at ±16 g 12-Bit ADC Coupled with Low Noise ARM Sensors Achieves 5 milli-gauss Resolution in ±8 Gauss Fields Pressure range:300 to1100hPa (+9000m to -500m above sea level) I2C interfaces Power supply: 3-5v
Reference: RBD-0812
Based on MAX30105 – heart rate, oximeter, smoke sensor Green, red, and infra-red LEDs Interface: I2C (address 0x57) Compatible with 3.3V and 5V logic levels.
Reference: RBD-0569
Acceleration, Gyroscope Power Supply: DC3.3V-5V Chip: MPU9250 Size: 22 mm x 17 mm. Gyro range : ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g 9 DOF modulesChinese Variant MP92 QFN24 PackageThe magnetometer is currently inaccessible via I2C and therefore unavailable.True 9dof: Gravity 10 DOF IMU AHRS BNO055 + BMP280 True 9dof: GY-BNO055...
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-3450
The GY-BMI160 Module integrates the powerful BOSCH BMI160 inertial measurement unit (IMU), delivering high-precision 6-axis motion sensing in an ultra-compact package. Designed for mobile phones, tablets, and wearable devices, the BMI160 combines a 3-axis accelerometer and 3-axis gyroscope to offer exceptional motion tracking performance with ultra-low...
Reference: RBD-0700
Operating Voltage: 3.3V-5.5V Low Power Consumption High Accuracy Small Size
Reference: RBD-3525
Brand: DFRobot
At the beginning, the inertial measurement unit is an electronic device that measures and reports on a craft's velocity, orientation, and gravitational forces, using a combination of accelerometers,gyroscopes, and magnetometers. Now IMU sensor are commonly used in the Human-computer interaction(HCI), navigational purposes and balancing technology used in...
The GY-91 10-DOF Motion Tracking Module combines two highly sophisticated sensors — the MPU9250 and the BMP280 — to deliver a complete 9-axis motion tracking and environmental sensing solution. Designed for smartphones, tablets, wearable devices, drones, and embedded systems, this module offers precision motion sensing alongside barometric pressure measurement in an extremely compact and low-power package.
The magnetometer is currently inaccessible via I2C and therefore unavailable.
True 9dof: Gravity 10 DOF IMU AHRS BNO055 + BMP280
