How to Place an Order
Store Pick Up
Request for Quotation/ International Sourcing
Order Status
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0351
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
Reference: 0245
Choose your desire Resistor value from below:
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: 1353
Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0761
Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical
Fully Arduino and Microcontroller Compatible
◾ GSM module: SIM900A
◾ RTC backup battery
◾ A microphone port
◾ A headphone jack
◾ RS232 interface selection
◾ RS232 serial port
◾ lithium battery Interface
◾ power input connector
◾ power LED (blue)
◾ power switch
◾ SIM card Slot
◾ SMA antenna interfaces and supporting small antenna
◾ Power On / Off button
◾ Network status indicator (red)
Store Pickup Available!
Free Ship Over 5000 BDT
Quality Product
No Warranty
No Replacement
Fully Arduino and Microcontroller Compatible
◾ GSM module: SIM900A
◾ RTC backup battery
◾ A microphone port
◾ A headphone jack
◾ RS232 interface selection
◾ RS232 serial port
◾ lithium battery Interface
◾ power input connector
◾ power LED (blue)
◾ power switch
◾ SIM card Slot
◾ SMA antenna interfaces and supporting small antenna
◾ Power On / Off button
◾ Network status indicator (red)
SIM900A modules were used for all IO port pin leads, easy to use
ATK-SIM900A module (development board) using industry-standard design, features include:
◾ onboard RS232 serial port (supports hardware flow control), convenient and PC / IPC and other devOces;
◾ Onboard 3.5mm headphone and microphone for easy voice communication development;
◾ SIM900A module leads all the IO ports, and communications section IO port compatibility design made for easy connection 3.3V/5V SCM system;
◾ efficient synchronous buck circuit board, the conversion efficiency up to 90%, support for wide voltage range (5 ~ 24V), ideal for industrial applications;
◾ Onboard power anti-reverse protection, TVS power protection and SIM card ESD protection, the protection function;
◾ Board RTC backup battery (XH414H-IV01E), without worrying about the power-down problem;
◾ Onboard antenna, can effectively improve the signal reception;
◾ adopt international A-level PCB material, immersion gold processing technology, stable and reliable;
◾ processed using the new components, copper plated pin, durable;
◾ Perfect design, each interface has a screen annotation, use a glance; connector location and reasonable arrangements designed to facilitate smoothly.
◾ PCB size is 80mm * 58mm, and with mounting holes, small and exquisite;
4, ATK-SIM900A GSM / GPRS module (development board) Specification
ATK-SIM900A SIMCOM module onboard the company's industrial-grade dual-band GSM / GPRS module: SIM900A, working band frequency: 900/1800Mhz, can achieve low-power voice, SMS (SMS, MMS is not supported), data, and fax messages transmission.
ATK-SIM900A module supports RS232 serial port, and with hardware flow control, support for 5V ~ 24V the wide scope of work, so that the module can be very convenient to connect with your product, giving your product, including voice, SMS and GPRS data transmission and other functions.
The latest price of ATK-SIM900A GSM /GPRS Module (Retired) in Bangladesh is BDT 1,600 You can buy the ATK-SIM900A GSM /GPRS Module (Retired) at best price from our RoboticsBD or visit RoboticsBD Office.
|
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. |
|
Product Images are shown for illustrative purposes only and may differ from the actual product. |
Reference: RBD-0841
Supports Quad-band: GSM850, EGSM900, DCS1800 and PCS1900 Connect onto any global GSM network with any 2G SIM Make and receive voice calls using an external 8Ω speaker & electret microphone Facility to connect 4-pole TRRS mic and headset
Reference: RBD-1023
Frequency (MHz) 1575 +/- 5 MHz Gain > 28 dBi (with LNA) Impedance (Ω) 50 Ω VSWR < 1.5 Polarization RHCP Power Handling (W) 50 watts Cable Length: 3Meter Connector: SMA-Male
Reference: RBD-0579
Quad-band 850/900/1800/1900MHz GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load) GPRS mobile station class B Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) Supports charging control for Li-Ion battery Supports Real-Time Clock Integrated GPS/CNSS and supports A-GPS Low power consumption, 10mA in sleep...
Reference: RBD-3539
The A259 SIM800 GSM GPRS Module is an all-in-one wireless communication solution designed for GSM voice calling, SMS messaging, and GPRS data transmission. With a wide input voltage range from 6V to 24V, the module is ideal for integration into various embedded systems. It is compatible with 3.3V and 5V TTL logic levels, making it an excellent fit for...
Reference: RBD-2542
Brand: DFRobot
This is an SIM808 GSM/GPRS/GPS IoT Board based on Arduino Leonardo. The SIM808 with Leonardo mainboard is the latest development board for multi-purpose applications. The onboard SIM808 module includes an integrated quad-band GSM/GPRS and GPS satellite navigation module, and a 4 layer PCB integrates the microcontroller, microphone, headphone jack and...
Reference: RBD-2999
Brand: DFRobot
SIM7600G-H 4G (LTE) is an Arduino Shield that supports 2G/3G/4G, GNSS satellite positioning, and LTE CAT4 (150Mbps DL, 50Mbps UL). It features a standard Arduino pinout and is compatible with Arduino UNO, Leonardo, Mega, and other main controllers. It supports LTE-TDD/LTE-FDD/WCDMA/GSM frequency bands, GNSS positioning with GPS, CLONASS, BD, and other...
Reference: RBD-3342
Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm. Module Size : approx. 26 x 36 x 4 (LxWxH) mm. Net weight : approx. 16 gm. Gross weight : approx. 17 gm. Mounting : approx. 3 mm. The default baud rate : 9600.In recent years 2024, due to a shortage of chips, some of the GPS modules have been recycled from GPS Tracker. So these modules have used marks due to...
Reference: RBD-0797
5Hz position update rate. The cold start time of 38 s and Hot start time of 1 s. Configurable from 4800 Baud to 115200 Baud rates. (default 9600). SuperSense ® Indoor GPS: -162 dBm tracking sensitivity. Support SBAS (WAAS, EGNOS, MSAS, GAGAN). Separated 18 x 18mm GPS antenna. RoboticsBD In recent years 2022, due to a shortage of chips, some of the GPS...
Reference: RBD-1852
IPEX To SMA Female External Antenna Adapter SMA Male Antenna for 2.4G WIFI Module Only Antenna and Adapter RF Cable ESP32 Cam is not included
Reference: RBD-2396
High-Precision GPS Module: NEO-7M satellite positioning module with MicroUSB interface for easy connectivity. USB and TTL Interface: Features MicroUSB for direct connection and TTL pins for external MCU or USB-TTL module. Built-in Ceramic Antenna: Provides excellent satellite search capability; includes SMA interface for external active antennas. Wide...
Reference: RBD-0318
This module is intended for advanced users who require moderate knowledge of GSM systems and microcontrollers. It needs wiring and firmware updates to unlock the country lock. Dual-Band 900/ 1800 MHz GPRS multi-slot class 10/8GPRS mobile station class B Compliant to GSM phase 2/2+ Dimensions: 24*24*3 mm Weight: 3.4g Control via AT commands (GSM 07.07...
Reference: RBD-3279
The GY-NEO-7M V2 GPS Module is a high-performance GNSS receiver module designed for accurate navigation and positioning applications. Built on the u-blox M8 GNSS engine, this module supports multiple satellite systems, including GPS, GLONASS, Galileo, BeiDou, QZSS, and SBAS, ensuring fast and precise location tracking.
Reference: RBD-1020
Frequency (MHz) : 824 – 960 MHz & 1710 – 1980 MHz Gain:2 / 3 dBi Impedance (Ω): 50 Connector Type: SMA Plug VSWR :< 2.5
Reference: RBD-1557
USB communication, no need write code Support PC software automation Double antenna Support quad-band, universal worldwide Support 2G/3G/4G Automatically connect to the network Adaptive frequency
Reference: RBD-1138
Board Based On AI-Thinker A9 GPRS Module Supports Firmware Upgrade Via Serial Port Operating Voltage: 5v
Reference: RBD-2708
Unleash cellular connectivity in your projects with this USB to GSM module featuring a SIM800C core. Supports voice calls, SMS, data transmission, and Bluetooth communication for versatile applications. Quad-band GSM/GPRS functionality ensures global network compatibility. User-friendly features like PC software support, auto-network connection, and...
Reference: RBD-2328
SIM A7670C R2 4G LTE GSM Module supports LTE-TDD, LTE-FDD, GSM, GPRS, and EDGE communication modes Achieves up to 10Mbps downlink and 5Mbps uplink rates for high-throughput IoT applications Built-in support for telematics, surveillance, POS, industrial routers, and remote diagnostics Wide operating temperature range from -30°C to +80°C for reliable...
Reference: RBD-1412
Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH: QSPI flash 4MB / PSRAM 8MB SRAM:520 kB SRAM Button: Reset USB to TTL: CP2104 Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO On-board clock:40MHz crystal oscillator Working voltage:2.7V-3.6V Working current: About 70mANote : AM-036 printed on board...
Reference: RBD-0552
Working frequency: quad-band network, 850 / 900 / 1800 / 1900MHz Working voltage: 4.8-9VDC(On-board voltage regulator circuit supply power for A6 module) Working Current: maximum of 2A. RoboticsBD
Reference: RBD-1641
Product: GSM Antenna Color: Black SMA male straight 5cm 900-1800MHz radio antenna. Frequency: 900MHz – 1800MHz Maximum Power: 50W Length: 5cm/1.97 inch
Reference: RBD-1039
The module was recycled from a mobile phone so you can say it is used. TTL serial port for serial port, you can link directly to the micro-controller. Don’t need MAX232. Power module automatically boots, homing network. Onboard signal lights all the way. It flashes slowly when there is a signal, it flashes quickly when there is no signal. In recent years...
Reference: RBD-3268
The GPRS GSM GPS SIM808 Board for Arduino is an all-in-one communication module that integrates GSM, GPRS, and GPS functionalities, making it ideal for tracking, remote monitoring, and IoT applications. Designed for easy compatibility with Arduino, Raspberry Pi, and other microcontrollers, this module allows users to send/receive SMS, make/receive calls,...
Reference: RBD-1134
Easy to Assemble Comes With all Components Operating Voltage: 5VDC Operating Current: 200mA Compatible With Arduino and Raspberry Pi
Reference: RBD-0443
Based on SIMCom‘s SIM900 Module Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. Control by AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
Reference: RBD-2397
High-Precision GPS Module: NEO-6M satellite positioning module with MicroUSB interface for easy setup. USB and TTL Interface: Supports debugging through MicroUSB or external TTL serial connection. Built-in Ceramic Antenna: Provides reliable satellite signal reception; SMA interface supports active antennas. Wide Voltage Compatibility: Operates on 3.3V-5V...
Reference: RBD-3280
The GY-NEO-6M V2 GPS Module is a high-performance GPS receiver designed for accurate navigation and positioning applications. This module comes equipped with a ceramic antenna, onboard EEPROM for data storage, and an LED signal indicator for real-time status updates.
Reference: RBD-1722
Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm. Module Size : approx. 26 x 36 x 4 (LxWxH) mm. Net weight : approx. 16 gm. Gross weight : approx. 17 gm. Mounting : approx. 3 mm. The default baud rate : 9600.
Reference: RBD-2064
TTL serial port for serial port, you can link directly to the micro-controller. Don’t need MAX232. Power module automatically boots, homing network. Onboard signal lights all the way. It flashes slowly when there is a signal, it flashes quickly when there is no signal. Note: If you want to buy the cheaper recycled SIM800L Module Click here.
Reference: RBD-3312
The u-blox NEO-6M module is a low cost easy to use GPS module that includes a built-in antenna
Reference: RBD-2545
Quectel EC200A-CN LTE Cat4 Module GSM GPRS MINI 4G To RJ45 Kit With 100M Ethernet PortEC200ACNDA: (China and India) FDD: B1/B3/B5/B8 TDD:B34/B38/B39/B40/B41 WCDMA:B1/B5/B8 GSM:B3/B8 IPEX1 generation 4G antenna interface Reserved for RoboticsBD
Reference: RBD-0023
Wide Working Voltage Range: DC 4.5V- 20V Current Drain: <60uA Detection Angle: <140° Detection Distance: 3 to 7m (can be adjusted) Blockade time: 2.5s (Default) Work temperature: -20-+80°C
Reference: RBD-0323
Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.
Reference: RBD-0161
Model: LCD2004 Character Color: White Backlight: Blue Supply voltage: 5V Dimensions(L x W x H) mm: 98 x 60 x 12
Reference: RBD-0040
Bluetooth 2.0 Module Based on CSR BC04 Chip – Ideal for reliable wireless communication. Slave Mode Only – Perfect for receiving data from smartphones or other master devices. Wide Operating Voltage (3.3V to 6V) with onboard regulator for easy integration. Built-in 2.4GHz PCB Antenna – Supports wireless range up to 10 meters. Simple UART Interface (VCC,...
Reference: RBD-0022
This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit. There are only four pins that you need to worry about on the HC-SR04: VCC (Power),...
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0126
Automate your home appliances with this compact WiFi and Zigbee dual-protocol smart switch. Supports high power loads (16A or 10A options) for controlling various devices. Works with traditional 2-way switches for seamless integration into existing wiring. Remote control and monitoring from anywhere via smartphone app. Voice control compatibility with...
Reference: RBD-0222
Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Ultra-thin and lightweight Low power consumption for voltage type Operating Temperature: -20~70 Storage Temperature: -30-80 Clear sound
Reference: RBD-0009
54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.
Reference: RBD-0022
This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit. There are only four pins that you need to worry about on the HC-SR04: VCC (Power),...
Reference: RBD-0023
Wide Working Voltage Range: DC 4.5V- 20V Current Drain: <60uA Detection Angle: <140° Detection Distance: 3 to 7m (can be adjusted) Blockade time: 2.5s (Default) Work temperature: -20-+80°C
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: RBD-0288
Three selectable full scales (250/500/2000dps) Factor in all g-ranges, up to 13-bit resolution at ±16 g 12-Bit ADC Coupled with Low Noise ARM Sensors Achieves 5 milli-gauss Resolution in ±8 Gauss Fields Pressure range:300 to1100hPa (+9000m to -500m above sea level) I2C interfaces Power supply: 3-5v
Reference: RBD-0040
Bluetooth 2.0 Module Based on CSR BC04 Chip – Ideal for reliable wireless communication. Slave Mode Only – Perfect for receiving data from smartphones or other master devices. Wide Operating Voltage (3.3V to 6V) with onboard regulator for easy integration. Built-in 2.4GHz PCB Antenna – Supports wireless range up to 10 meters. Simple UART Interface (VCC,...
Reference: RBD-0041
Bases at CSR BC04 Bluetooth technology. with build-in 2.4GHz PCB antenna It’s at the Bluetooth class 2 power level. Range test: 10 meters Operating voltage: 3.3V to 6V DC Operating current in pairing is in the range of 30~40mA.
Fully Arduino and Microcontroller Compatible
◾ GSM module: SIM900A
◾ RTC backup battery
◾ A microphone port
◾ A headphone jack
◾ RS232 interface selection
◾ RS232 serial port
◾ lithium battery Interface
◾ power input connector
◾ power LED (blue)
◾ power switch
◾ SIM card Slot
◾ SMA antenna interfaces and supporting small antenna
◾ Power On / Off button
◾ Network status indicator (red)
