Reference: RBD-1913

ADXL335 Module 3-axis Analog Output Accelerometer GY-61

3 reviews

Onboard LDO Voltage regulator Can be interfaced with 3V3 or 5V Microcontroller. Tap/Double Tap Detection Free-Fall Detection Analog output Build in ultra low noise linear LDO voltage regulator Built-in onboard filters, which reduce noise from the motor and other high current electronics Power LED

Reference: RBD-1914

Reed Switch Module

1 review

Working voltage 3.3V-5 Output format: digital switching output (0 and 1)A fixed bolt holes for easy installation

Reference: RBD-1918

Miniature Vibrating Motor 6x15

Speed(RPM):19000 Motor diameter: 6mm Shaft diameter: 0.8mm Shaft length: 4mm Rated voltage: 1.5V-4.5V

Reference: RBD-1919

GY-9255 MPU9255 Sensor Module

Acceleration, Gyroscope, and Magnetometer Power Supply: DC3.3V-5V Chip: MPU9250 Gyro range : ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g Magnetic field range: ± 4800uT 9 DOF modules

Reference: RBD-1931

Soil NPK Sensor Agricultural RS485/Modbus

Easy to Measure High Precision Low measurement cost Resolution up to 1mg/kg (mg/l)

Reference: RBD-1934

MQ-136 Hydrogen Sulfide Gas Sensor

1 review

Dual signal output (analog output and TTL level output) The TTL output effective signal is low. Analog output 0 ~ 5V voltage, the higher the concentration the higher the voltage. Good sensitivity to hydrogen sulfide, liquefied gas, natural gas, city gas, and smoke. with long service life and reliable stability fast response recovery characteristics

Reference: RBD-1935

Water Level Sensor Gold Coating

2 reviews

Water-level sensor indicates the level of water in an overhead tank Gold coated Long life time Simple working procedure

Reference: RBD-1942

MC-38 Wired Door Window Sensor Magnetic Switch Home Alarm System

1 review

Actuation Distance : 15 – 25 mm; Connecting cable length: 30 cm. Magnetic sensor alarm, control the switch of the circuit via the built-in magnet Alarm when someone intrudes into your places Can be used in places like apartment, hotel, office, etc.

Reference: RBD-1946

GY-BME280 3.3V Temperature and Humidity Sensor

1 review

Comes with the BME280 sensor. Pressure accuracy of ±1 hPa. Temperature accuracy ±1.0°C. Altimeter accuracy ±1 meter. Humidity: +-3%

Reference: RBD-1951

Anemometer/Wind Speed Measurement Sensor 0-5V

High hardness, Corrosion protection. Waterproofness and High precision. The mode of its output signal：0-5V(Voltage signal). supply voltage: DC 12-24V. Power consumption：Voltage MAX≤0.3W. Start wind speed：0.4-0.8m/s.

Reference: RBD-1974

Brand: DFRobot

Gravity Huskylens AI Camera Vision Sensor with Silicone Case

1 review

One-click learn Machine Learning Enabled Onboard Screen Extreme Performance

Reference: RBD-1976

OV2640 2.0 Mega Pixel 1/4'' CMOS Image Sensor Camera Module

1 review

High sensitivity for Low-Light Operation. Low Operating Voltage for Embedded Portable Apps. Supports Scaling. The Standard SCCB Interface is Compatible with the I2C Interface.

Reference: RBD-2056

PT-100 RTD Temperature Sensor 3 Wire 50cm

Mounting form Polish rod probe The Probe material: Stainless steel Probe diameter: 4mm Length of the probe: 30mm Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated) Accuracy ±(0.3°C+0.5%|t|) Thermal response time: <0.5s

Reference: RBD-2059

LDR 20 mm Light Depending Resistor

1 review

LDR 20 mm Light Depending Resistor Low-cost sensor device Wide spectral response Use in fire alarms, smoke alarms, control street light Low cost. Ambient Temperature Range. Wide spectral response.

Reference: RBD-1512

LDR 10-12 mm Light Depending Resistor

10 reviews

LDR 10 mm Light Depending Resistor Low-cost sensor device Wide spectral response Use in fire alarms, smoke alarms, control street light Low cost. Ambient Temperature Range. Wide spectral response.

Reference: RBD-0995

LDR 5 mm Light Depending Resistor

68 reviews

Diameter: 5mm No. of Pins: 2 Type of Mounting: PCB Through Hole Maximum Operating Temperature: +800°C (Approx.) Dark resistance:1-20 Mohm

Reference: RBD-2071

SS49E Linear Hall Effect Sensor Module

Type: Magnetic Sensor Module Mainly Compatible with: Ardunio

Reference: RBD-2072

Linear Magnetic Hall sensor

1 review

Operating Voltage: 3.3V-5V Features wide range voltage comparator LM393 Adjustable sensitivity Signal output indicator with the retaining bolt hole, convenient installation Output form digital switch output (0 and 1 high and low level) The output effective signal is low level When there is sound, outputs low level and the signal light

Reference: RBD-2073

A3144 Hall Effect Sensor Module

Digital Output Hall-effect sensor. Operating voltage: typically 5V. Output Current: 25mA. It can be used to detect both the poles of a magnet.

Reference: RBD-2075

MQ-2 Gas sensor Module

MQ-2 Smoke Gas Detector Sensor  ME084 Module for Arduino Operating Voltage:+5V Preheat Duration:20 s

Reference: RBD-2076

5mm Two-Color LED Module

Operating Voltage:2.0v ~ 2.5v Current:10mA Diameter:5mm Color: Red + Green Beam Angle:150

Reference: RBD-2077

3mm Two-Color LED Module

Operating Voltage:2.0v ~ 2.5v Current:10mA Diameter:3mm Wavelength:571nm + 644nm Beam Angle:150

Reference: RBD-2078

Vibration Switch Module

No direction, any angle can trigger the work. Sensitivity switches can be selected for the trigger sensitivity according to circuit requirements. This switch is suitable for the trigger of the small current circuit. Component Type: SW-18015P Maximum voltage: 12V Rated Heating Current: 20mA

Reference: RBD-2079

38KHz Infrared Transmit Sensor Module

1 review

This is 38KHz Infrared IR transmitter sensor module For Arduino Transmit 38KHz modulating signal Suitable for Arduino DIY project Material: PCB

Reference: RBD-2080

Dry Reed Pipe Magnetron Magnetic switch Module

Clean, good waveform driving ability, more than 15mA. Working voltage 3.3V-5 Output format: digital switching output (0 and 1) A  fixed bolt holes for easy installation

Reference: RBD-2081

Mini Dry Reed Pipe Module

Operating Voltage: 3.3V to 5v Output Type: Digital

Reference: RBD-2082

Infrared IR Sensor Receiver Module for Arduino

2 reviews

Dimension: 2.5 x 1.5 x 1.5 cm. Receiving angle: 90 °. Working voltage: 2.7 ~ 5.5V. Frequency: 37.9KHz Receiving range: 18m. Weight: 4 gm.

Reference: RBD-2083

Analog Temperature Sensor Module

Operating Voltage : 5v. Temperature measurement range : -55°C to 125°C. Measurement Accuracy : ±0.5°C.

Reference: RBD-2084

Digital Temperature Module

Power supply: 3 – 5V Good sensitivity The output format: Digital switching output (0 and 1) The comparator output signal is clean, good waveform, driving ability, more than 15mA. A fixed bolt holes for easy installation. Using a wide voltage LM393 comparator.

Reference: RBD-2085

PCB Mounted Passive Buzzer Module

Operating Voltage : 1.5 ~ 15V DC Working Current: Less than 25mA Tone Generation Range : 1.5 ~ 2.5kHz Dimensions (LxWxH):  26 x 15 x 11 mm

Reference: RBD-2086

Momentary Tactile Push Button Module DC 5V Switch

Operating Voltage: 5V Contact Resistance : 50mΩ max (initial) Electrically Life:100,000 cycles Environment temperature: -25°C to +105°C Operating Force: 180/230(±20gf) Seal temperature:250ºC-280ºC I/O pins: 3 pins

Reference: RBD-2087

Broken Light Module

Voltage 5V Photo interruption module triggers a signal when light is blocked between the opening of the sensor.