Reference: RBD-1041

5V LED Traffic Light Module

PCB Size: 60 x 20 x 13.5 (LxWxH)mm. Color: red, yellow, green LED Size: 10mm x 7. Brightness: Normal brightness. Voltage: 5V. Interface: common cathode red yellow green control.

Reference: RBD-2240

LilyPad SMD LED Green Color

Wearable e-textile technology.  Designed with large sew tabs LED Green Color

Reference: RBD-0389

PL2303 USB to TTL Serial Converter

Adopt imported controller PL2303HX, which can stabilize the flash with high speed 500mA self-recovery fuse for protection Two data transmission indicator can monitor data transfer status in real time Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power The entire board is coated by the high quality transparent...

Reference: RBD-1510

Bridge Rectifier, 35A 1000V, 4-Pin

Bridge Rectifier 35A 1000V, 4-Pin KBPC

Reference: RBD-2033

28.8 MHz Crystal Oscillator

Frequency: 28.8 MHz Tolerance: 30% Operating Temperature Range: -10°C to +60°C Storage Temperature Range: -20°C to +70°C

Reference: RBD-0406

HW-411A LM2596 DC-DC Step Down Adjustable Power Supply Module 3A Max Buck Converter

Input voltage: 4.5-35V, Output voltage: (3-35V) continuously adjustable (recommended load debugging). Minimum pressure: 1.5V Output current: rated current 2A, 3A maximum Output Power: 15W maximum. RoboticsBD

Reference: RBD-0753

Active Buzzer 5V

Input Voltage(Max.) : 5V Resistance: 90 Ω Resonance Frequency: 2048 Hz Sound pressure(dB(A)/10cm)min.: 80 Body Size : 12 x 9.5mm Pin Pitch: 6mm External Material: Plastic; Color: Black

Reference: RBD-0764

AA Battery Holder 3S

Cell Quantity: 3 Battery type: AA Storage temperature: 25ºC Max Operate temperature: 80ºC

Reference: RBD-0840

Veroboard Dot Type

Dimension: 14.5×6 cm Copper Thickness 1-4 OZ Board Thickness 1.1 mm Board color: Brown

Reference: RBD-1302

Full-Color RGB SMD Led Module

Using 5050 full color LED RGB tricolor current-limiting resistance to prevent burn out Through the PWM adjusting three primary colors can be mixed to obtain different colors With a variety of single-chip interface Working voltage: 5V LED drive mode: Common cathode driver

Reference: RBD-2110

AMS1117-3.3V, 1A, SOT-223 Voltage Regulator IC

Low dropout voltage Load regulation: 0.2% typical Optimized for Low Voltage On-chip thermal limiting Built-in thermal shutdown Good noise rejection

Reference: RBD-2203

Mini RGB Bluetooth Controller

The Mini RGB Bluetooth Controller is a small device that allows you to control the color and brightness of RGB LED strips via Bluetooth. It can work with DC voltage of 5V, 12V, and 24V and has a music sync feature that allows the lights to change color and brightness in sync with music. It can be used in a variety of settings such as home lighting,...

Reference: RBD-1029

SN74HC47N

IC Name: SN74HC47N Package/Case: DIP-16

Reference: RBD-0337

Brand: Waveshare

Liquid Level Sensor for Arduino (WaveShare)

Detection depth: 48mm Power: 2.0V ~ 5.0V Dimension: 19.0mm * 63.0mm Mounting holes size: 2.0mm

Reference: RBD-1842

Stainless Steel 1m Conductive Thread Wire for Wearable Lilypad

Material: 12UM Stainless steel fiber Gram Weight: 0.2458g/m Strength: 2.8KGF. Length: 1m. Diameter(mm): 0.12. Resistance (Ω/m) : 27.

Reference: RBD-1597

SSR-40DA Solid State Relay Module

Long Service life and high Reliability Reduced Electromagnetic Interference Highly reliable, compact size designed to offer users maximum simplicity Trigger Voltage: 3-32VDC Switching Voltage: 24-380VAC@40A

Reference: RBD-1741

AA Size Battery Holder 1S

Cell Quantity: 1 Battery type: AA Storage temperature: 25ºC Max Operate temperature: 80ºC

Reference: RBD-1944

AA Battery Holder 5S

Cell Quantity: 5 Battery type: AA Storage temperature: 25ºC Max Operate temperature: 80ºC

Reference: RBD-0388

TP4056 5V Mini USB Charger Module

Input voltage : 4.5V ~ 5.5V. Input Interface: Micro USB port. Charging method: linear charge. A full charge voltage: 4.2V. RoboticsBD Power: 4.2 w. Charging accuracy: 1.5%. Operating Temperature: -10 to +85ºC Charging indicator: Blue LED charging, Red LED full Check out New Product TP4056 Lithium Battery Charger Module With Protection Dual Functions

Reference: RBD-0314

Double-ended 50cm Cable Crocodile Clips

Colour: Red, Green, Yellow, White, and Black, etc. Cable length: 40 cm. RoboticsBD Net weight: 50 gm. They are very useful for connecting components to wires. It is insulation covered clips connected to the wire from both ends. RoboticsBD *You will receive 1 pcs cable of random color.

Reference: RBD-0272

Brand: Waveshare

Logic Level Converter

Voltage level: 1.8V-6V Dimension: 38mm x 31.6mm Conversion  level  range:  1.8 V-6 V Instructions for use:  (3.3 V,  5 V  to  each other) 4 pairs of power supply interfaces, supports more situation Use tantalum capacitors for power filter, provides more stability VCCB 5V  power supply  (can  be an external  5V power supply)

Reference: RBD-0222

35mm Piezo Ceramic Elements Sound Sensor

Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Ultra-thin and lightweight Low power consumption for voltage type Operating Temperature: -20~70 Storage Temperature: -30-80 Clear sound

Reference: RBD-0761

Push Button Switch (2PIN)

Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical

Reference: RBD-1028

CD4026BE

IC Name: CD4026BE Package/Case: DIP-16

Reference: RBD-1303

Battery Holder 6xAA

Cell Quantity: 6 Battery type: AA Storage temperature: 25ºC Max Operate temperature: 80ºC Dimensions: 92 x 57 x 15 mm

Reference: RBD-1363

Veroboard Line Type

Dimension: 14.5×6 cm Copper Thickness 1-4 OZ Board Thickness 1.1 mm Board color: Brown

Reference: RBD-0410

X9C103S Digital Potentiometer Module for Arduino

Supply voltage: 6V-15V Chip: X9C103S Dimensions : 28 x 14 x 4 (LxWxH) mm. RoboticsBD 10K span potentiometer. Potentiometer center tap between the 0-10k slide in total 100 (potentiometer wiper typical impedance 40 ohms)

Reference: RBD-0386

Precision Real Time Clock Module DS3231 AT24C32 I2C

1 Hz output pin SQW. 32 KHz output pin 32K. RoboticsBD Voltage Supply: 2.2 V ~ 5.5 V (for RTC). Time Format: HH: MM: SS (12/24 hr). Date Format: YY-MM-DD-dd. DS 3231 based RTC with 2032 Battery Holder. RoboticsBD Battery is not included Note: Batteries not included.

Reference: RBD-0996

10K Ohm Potentiometer

Resistance: 10k Ω. Tolerance: 20%. Shaft Length: 15mm.

Reference: RBD-0189

Brand: DFRobot

Xbee Shield for Arduino (without Xbee)

Xbee Shield for Arduino (without Xbee) INTRODUCTION: The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs.The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission.